語系
江卓培
概要
| 作品: | 2 作品在 6 項出版品 1 種語言 | |
|---|---|---|
書目資訊
新式生醫快速原型系統開發暨其生物相容支架製作 = Development of novel bio-rapid prototyping system and fabrication of cell seeded biocompatible scaffold
by:
Jyun-Ru Huang; 黃俊儒; 江卓培; C.P.Jiang
(書目-語言資料,印刷品)
應用快速原型技術於製作腫瘤血管以進行體外高能 聚焦超音波熱燒灼之研究 = Apply rapid prototyping technology in tumor vessel fabrication for investigating thermal ablation using high intensity focused ultrasound
by:
Yi-Syun Wu; 江卓培; 吳宜勳
(書目-語言資料,印刷品)
創新自然孔道內視鏡手術用操縱器與夾鉗之開發 = Development of a novel manipulator with endoclips optimization for natural orifice transluminal endoscopic surgery
by:
陳立旻; 江卓培; Cho-Pei Jiang; Li-Min Chen
(書目-語言資料,印刷品)
LED陣列車頭燈散熱元件之數值分析與實驗量測之研究 = Study on The Thermal Management for A Car LED Array Headlamp Using Numerical Analysis and Experimental Validation
by:
Cho-Pei Jiang; 謝鴻銘; Mung-Ming Hsieh; 江卓培
(書目-語言資料,印刷品)
晶粒尺寸效應在微管件擴孔極限之研究 = Grain Size Effect on Flaring Limit of SUS 304 Stainless Steel Microtube
by:
Cheng-Han Tsai; 蔡承翰; 江卓培; C.P.Jiang
(書目-語言資料,印刷品)
桌上型生醫快速原型系統之開發與單甲氧基聚乙二醇-聚己內酯-單甲氧基聚乙二醇聚合物支架之製作 = Development of a Desktop Bio-Rapid Prototyping System for Fabricating mPEG-PCL-mPEG Scaffolds
by:
Cho-Pei Jiang; 陳右育; Yo-Yu Chen; 江卓培
(書目-語言資料,印刷品)
主題
Annealing Treatment
組織工程
閉塞效應
rapid prototyping (RP)
Polyethylene glycol (PEG)
Scaffold
patent analysis
Tissue engineering
支架
Natural Orifice Transluminal Endoscopic Surgery
自然孔道內視鏡手術
Rapid prototyping (RP)
腫瘤新生血管
Grain Size Effect
tumor angiogenesis
高功率LED
Micro-Forming
微成型
high-power LED
自組裝氣壓輔助式生醫快速原型系統
Flaring Limit
MC3T3-E1
晶粒尺寸效應
PCL-PEG-PCL
聚乙二醇
mPEG-PCL-mPEG
聚己內酯
Rapid Prototyping
退火熱處理
gas-assisted rapid prototyping system
高能聚焦超音波
骨母細胞
thermal ablation
快速原型
強制對流
Polycaprolactone (PCL)
forced convention
擴孔極限
occlusion effect
熱燒灼
專利分析
high intensity focused ultrasound (HIFU)
單甲氧基聚乙二醇-聚己內酯-單甲氧基聚乙二醇