國立虎尾科技大學 |

Failure analysis of pre-notched composite laminated plates under four-point bending conditions.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Failure analysis of pre-notched composite laminated plates under four-point bending conditions./
作者:	Arias, Sergio G.
面頁冊數:	1 online resource (219 pages)
附註:	Source: Dissertation Abstracts International, Volume: 70-04, Section: B, page: 2521.
Contained By:	Dissertation Abstracts International70-04B.
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781109092776

Failure analysis of pre-notched composite laminated plates under four-point bending conditions.
Arias, Sergio G.

Failure analysis of pre-notched composite laminated plates under four-point bending conditions. - 1 online resource (219 pages)

Source: Dissertation Abstracts International, Volume: 70-04, Section: B, page: 2521.

Thesis (Ph.D.)--Oregon State University, 2009.

Includes bibliographical references

Ever since composite laminate technology was introduced into the aerospace and automotive industry, there has been a need to fully understand the damage progression experienced by composite laminated plates in the presence of a notch. While numerous research studies have been conducted on this matter when subjected to in-plane loads, not much focus has been directed to the out-of-plane loading conditions. To address this issue, a comprehensive study in partnership with the Boeing Commercial Airplane Company and the Federal Aviation Administration was carried out, using laboratory tests and computer simulations, to predict the failure mechanisms of pre-notched composite laminated plates under four-point bending.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781109092776Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Failure analysis of pre-notched composite laminated plates under four-point bending conditions.
LDR:03592ntm a2200337Ki 4500 001 916003
005 20180907134546.5
006 m o u
007 cr mn||||a|a||
008 190606s2009 xx obm 000 0 eng d
020 $a 9781109092776
035 $a (MiAaPQ)AAI3352005
035 $a AAI3352005
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Arias, Sergio G. $3 1189569
245 1 0 $a Failure analysis of pre-notched composite laminated plates under four-point bending conditions.
264 0 $c 2009
300 $a 1 online resource (219 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 70-04, Section: B, page: 2521.
500 $a Adviser: Timothy C. Kennedy.
502 $a Thesis (Ph.D.)--Oregon State University, 2009.
504 $a Includes bibliographical references
520 $a Ever since composite laminate technology was introduced into the aerospace and automotive industry, there has been a need to fully understand the damage progression experienced by composite laminated plates in the presence of a notch. While numerous research studies have been conducted on this matter when subjected to in-plane loads, not much focus has been directed to the out-of-plane loading conditions. To address this issue, a comprehensive study in partnership with the Boeing Commercial Airplane Company and the Federal Aviation Administration was carried out, using laboratory tests and computer simulations, to predict the failure mechanisms of pre-notched composite laminated plates under four-point bending.
520 $a A total of 48 pre-notched laminates, varying in size, layer orientations, and thickness were tested, and the deformation data was recorded by means of strain gages. Two notch lengths of 1-in. and 4-in. with an end radius of 0.125-in. were considered in the analysis. The laminates were also modeled in the finite element software ABAQUS to determine the concentration factors and explore the damage progression based on the Hashin criterion. The results were compared to the test data for correlation and validity.
520 $a From the simulation results, it was determined that the classical laminated plate models under-predicted the strain concentration factors, and that Reissner's models should be employed in order to conduct failure analysis on composite laminates when subjected to pure bending. The shell model that takes into account transverse shear effects was then chosen to provide the progressive damage simulation. It was found that the results of these theoretical models from ABAQUS were very similar to the results of the test samples generated in our experiments. In general, very good agreement between the simulations and the test results was obtained for the thin laminates. Particularly, as the percentage of 0-degree plies increased, so did the correlation with the test samples. Our theoretical models were capable of reproducing accurately their failure points by taking into consideration the large deformation effects and damage progression. On the other hand, the thick laminate models were not as successful in predicting failure. In most cases, they computed a failure moment higher than the ones found in the experiment.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Oregon State University. $3 560908
773 0 $t Dissertation Abstracts International $g 70-04B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3352005 $z click for full text (PQDT)