國立虎尾科技大學 |

Fabrication and Characterization of Novel 2SSS CIGS Thin Film Solar Cells for Large-Scale Manufacturing.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Fabrication and Characterization of Novel 2SSS CIGS Thin Film Solar Cells for Large-Scale Manufacturing./
作者:	Jayadevan, Keshavanand.
面頁冊數:	75 p.
附註:	Source: Masters Abstracts International, Volume: 50-01, page: 0549.
Contained By:	Masters Abstracts International50-01.
標題:	Alternative Energy. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1496936
ISBN:	9781124786346

Fabrication and Characterization of Novel 2SSS CIGS Thin Film Solar Cells for Large-Scale Manufacturing.
Jayadevan, Keshavanand.

Fabrication and Characterization of Novel 2SSS CIGS Thin Film Solar Cells for Large-Scale Manufacturing. - 75 p.

Source: Masters Abstracts International, Volume: 50-01, page: 0549.

Thesis (M.S.E.E.)--University of South Florida, 2011.

A novel 2SSS (2 Step Solid Selenization) CIGS (Cu, In, Ga, Se) thin film solar cell recipe was developed which can be a replacement to the conventional co-deposition process usually employed for large-scale manufacturing. The co-deposition procedure is faced with multiple problems such as selenium incorporation, effective gallium incorporation in the absorber. It is a 2-step proprietary procedure with better control over growth mechanisms and material utilization for the absorber layer for the CIGS thin film solar cells. It makes use of solid selenium source as preferred by manufacturers. Each step of the 2-step procedure was dealt with separately for stoichiometric analysis and interesting trade-offs between materials such as gallium, indium and selenium was found. Solar cells with this proprietary absorber were fabricated on soda lime glass substrates. Results of the solar cells made with the 2SSS process matched with that of the co-deposition process with the quantum efficiencies near 80% of the co-deposition cells. These experiments are going to serve as the test bed for the pilot line that is intended to be installed at USF's research campus soon. The finished solar cells were characterized. The scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) were some of the important tools during the analysis of stoichiometry and structural properties. The device performances were measured with the help of current-voltage (I-V) testing and quantum efficiency (QE) measurements.

ISBN: 9781124786346Subjects--Topical Terms:

845381
Alternative Energy.

Fabrication and Characterization of Novel 2SSS CIGS Thin Film Solar Cells for Large-Scale Manufacturing.
LDR:02557nam 2200313 4500 001 713036
005 20121003100351.5
008 121101s2011 ||||||||||||||||| ||eng d
020 $a 9781124786346
035 $a (UMI)AAI1496936
035 $a AAI1496936
040 $a UMI $c UMI
100 1 $a Jayadevan, Keshavanand. $3 845642
245 1 0 $a Fabrication and Characterization of Novel 2SSS CIGS Thin Film Solar Cells for Large-Scale Manufacturing.
300 $a 75 p.
500 $a Source: Masters Abstracts International, Volume: 50-01, page: 0549.
500 $a Adviser: Don Morel.
502 $a Thesis (M.S.E.E.)--University of South Florida, 2011.
520 $a A novel 2SSS (2 Step Solid Selenization) CIGS (Cu, In, Ga, Se) thin film solar cell recipe was developed which can be a replacement to the conventional co-deposition process usually employed for large-scale manufacturing. The co-deposition procedure is faced with multiple problems such as selenium incorporation, effective gallium incorporation in the absorber. It is a 2-step proprietary procedure with better control over growth mechanisms and material utilization for the absorber layer for the CIGS thin film solar cells. It makes use of solid selenium source as preferred by manufacturers. Each step of the 2-step procedure was dealt with separately for stoichiometric analysis and interesting trade-offs between materials such as gallium, indium and selenium was found. Solar cells with this proprietary absorber were fabricated on soda lime glass substrates. Results of the solar cells made with the 2SSS process matched with that of the co-deposition process with the quantum efficiencies near 80% of the co-deposition cells. These experiments are going to serve as the test bed for the pilot line that is intended to be installed at USF's research campus soon. The finished solar cells were characterized. The scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) were some of the important tools during the analysis of stoichiometry and structural properties. The device performances were measured with the help of current-voltage (I-V) testing and quantum efficiency (QE) measurements.
590 $a School code: 0206.
650 4 $a Alternative Energy. $3 845381
650 4 $a Engineering, Electronics and Electrical. $3 845382
650 4 $a Energy. $3 784773
690 $a 0363
690 $a 0544
690 $a 0791
710 2 $a University of South Florida. $b Electrical Engineering. $3 845643
773 0 $t Masters Abstracts International $g 50-01.
790 1 0 $a Morel, Don, $e advisor
790 1 0 $a Ferekides, Christos $e committee member
790 1 0 $a Hoff, Andrew $e committee member
790 $a 0206
791 $a M.S.E.E.
792 $a 2011
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1496936