張信良

概要

作品:	6 作品在 20 項出版品 1 種語言

書目資訊

平面齒輪之非接觸式檢驗 = Non-contact inspection for the planar gears by: 林育增; 張信良; Yu-Zeng Lin; Shinn-Liang Chang (書目-語言資料,印刷品)

雙蝸桿接觸之特性研究 = The Characteristic Studies on the Contact of Twin-Worms by: 薛全萌; Shinn-Liang Chang; 國立虎尾科技大學; Chuan-Men Shiue; 張信良 (書目-語言資料,印刷品)

齒輪對狀態監測與分析 = Gears Condition Monitoring and Analysis by: 吳信融; Shinn-Liang Chang; Xin-rong Wu; 張信良 (書目-語言資料,印刷品)

齒輪故障信號檢測 = Gear Fault Detection by Signal Processing by: Hong-Ming Dai; Shinn-Liang Chang; 戴宏明; 張信良 (書目-語言資料,印刷品)

鉋齒刀之切削模擬與剛性分析 = Cutting Simulation and Stiffness Analysis of Shaper Cutter by: 張信良; 洪新堡; Shinn-Liang Chang; Xin-Bao Hong (書目-語言資料,印刷品)

具修整齒形之齒輪刮削模擬與接觸分析 = Simulation of Gear Shaving with Tooth Profile Modification and the Tooth Contact Analysis by: 國立虎尾科技大學; Shinn-Liang Chang; 金凱威; Kai-Wei Jin; 張信良 (書目-語言資料,印刷品)

非圓形齒輪-連桿機構應用於特定路徑產生之研究 = A Study on the Generation of Specific Paths using a Noncircular Gear-Link Mechanism by: 楊倬昀; Cho-Yun Yang; 張信良; 劉俊佑; Jen-Yu Liu; Shinn-Liang Chang (書目-語言資料,印刷品)

球形齒輪之特性研究 = Characteristic Study of Spherical Gear by: Chang-Wei Cao; 張信良; Shinn-Liang Chang; 曹昌偉 (書目-語言資料,印刷品)

具滾根槽之刮齒刀應力分析與其創生用之滾齒刀設計 = Stress Analysis of Shaving Cutter with Relief Portion and Design of the Generating Hob Cutter by: 張信良; Shinn-Liang Chang; 蔡鋒穎 (書目-語言資料,印刷品) , [指導]

齒輪刮削與刮齒刀參數設計 = Studies on the gear shaving and the parameters design of shaving cutter by: 張信良; Chang-Hsuan Chu; Shinn-Liang Chang; 初長軒 (書目-語言資料,印刷品)

主題

半導體製程應力分析 Injection molding aspherical lens Shaper Cutters Visual Basic 非球面鏡有限單元分析 Transmission efficiency edge contact 非圓形齒輪 gear shaving finite element method Abrasive Mechanism 瘤頭滾齒刀 Ackermann Steering Principle Non-circular gears 齒形精度 Double crowning EMD 射出成型 Stiffness Index 氣泡 near field lenses Bellows Straight Line Motion Mechanism tooth contact analysis transmission error analysis contour method 刮齒刀 Image Processing 電子顯微鏡 Profile Deviation Gear Mesh Frequency Vibration contact pattern analysis 等高線法振動空孔 generation method Measurement Path Generation 相位式繞射光柵迴歸分析法 wave-dividing 接觸分析球形齒輪鉋齒刀傳動誤差 phase-diffraction grating stress analysis Spectrum Analysis protuberance hob cutter Gear fault B-spline 插槽 inclusions 神經網路創生法 Noncircular Gears Mechanism Design 齒緣接觸高負荷滾珠螺桿 semiconductor processing 頻譜分析 Contour method 轉向機構 Taguchi experimental design method 隆齒研磨機 bubbles 最佳化設計影像處理 multi-focusing 快速傅立葉 involute gear spherical gear Concept Design Shaving cutter 分光 Electron microscopy Steering Mechanism optimum design 剛性指標齒輪故障 Taguchi Method 多焦點漸開線齒輪齒輪嚙合頻構想設計 Pitch Error 機構設計 theory of gearing Heavy Load Ballscrew 阿克曼轉向原{EFA7A4} 伸縮軟管 SolidWorks API 接觸齒印量測 B-spline曲線 Wavelet serration 齒輪原理經驗模態分解法聚焦透鏡 ANN 雙蝸桿 FFT Twin-worms 田口法直線機構有限元素分析傳動效率 Regression Analysis 節距誤差 diffractive optical elements 翹曲刮齒小波分析 crowning 田口實驗設計法繞射光學元件路徑產生