國立虎尾科技大學 |

The Application of Magnetic Adsorbents in Gold Recovery.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	The Application of Magnetic Adsorbents in Gold Recovery./
Author:	Xia, Jinsong.
Description:	1 online resource (158 pages)
Notes:	Source: Dissertations Abstracts International, Volume: 85-04, Section: B.
Contained By:	Dissertations Abstracts International85-04B.
Subject:	Pollutants. -
Online resource:	click for full text (PQDT)
ISBN:	9798380484565

The Application of Magnetic Adsorbents in Gold Recovery.
Xia, Jinsong.

The Application of Magnetic Adsorbents in Gold Recovery. - 1 online resource (158 pages)

Source: Dissertations Abstracts International, Volume: 85-04, Section: B.

Thesis (Ph.D.)--Queen's University (Canada), 2023.

Includes bibliographical references

Gold is a highly valuable precious metal that plays a crucial role in both economic and technological domains. Hydrometallurgy is a widely adopted process for extracting gold from both primary ores and secondary sources. Adsorption is a popular solution purification technology used in hydrometallurgical process for gold solution concentration and recovery due to its low cost, high efficiency, and ecofriendliness. However, current gold adsorption techniques suffer from limitations such as low efficiency, poor selectivity, and solid-liquid separation problems. Magnetic adsorbents have emerged as a promising solution to overcome these challenges. This thesis presents three magnetic adsorbents that could potentially advance the gold adsorption process.In order to address the challenges of slow kinetics and solid-liquid separation associated with conventional activated carbon adsorbents, a one-pot solvothermal method was employed to synthesize magnetic activated carbon. The magnetic activated carbon synthesized through this approach displays excellent magnetism and a high specific surface area. Moreover, the magnetic activated carbon exhibited a remarkable gold recovery rate, which was considerably faster than the rate for the commercial granular activated carbon.A novel approach using magnetic iron sulfide (Fe3S4/Fe7S8) materials has been developed for the recovery of Au(III) through magnetic adsorption. Four different magnetic iron sulfide materials were synthesized using either hydrothermal or solvothermal methods, and their gold adsorption abilities were analyzed and compared. One of the materials demonstrated an exceptional adsorption capacity of 2020.7 mg/g, further tests confirmed its remarkable properties, including selectivity, magnetism, and recyclability. The adsorption-reduction mechanism was analyzed in detail using XRD and XPS analyses.A core-shell structured Fe3O4 CuS was further developed for gold recovery from chloride solution through in-situ reduction. The resulting gold-loaded adsorbent can be easily separated using an external magnet, offering advantages such as high efficiency, ease of operation, low cost, low materials consumption, and low waste generation. Results show that this adsorbent has an outstanding gold recovery efficiency and selectivity. This research shows the feasibility of using Fe3O4 CuS for efficient gold recovery, and provides insights into its adsorption behavior and mechanism.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798380484565Subjects--Topical Terms:

568170
Pollutants.
Index Terms--Genre/Form:

554714
Electronic books.

The Application of Magnetic Adsorbents in Gold Recovery.
LDR:03761ntm a22003857 4500 001 1141930
005 20240604073604.5
006 m o d
007 cr mn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798380484565
035 $a (MiAaPQ)AAI30616947
035 $a (MiAaPQ)QueensUCan_197431687
035 $a AAI30616947
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Xia, Jinsong. $3 1466017
245 1 4 $a The Application of Magnetic Adsorbents in Gold Recovery.
264 0 $c 2023
300 $a 1 online resource (158 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-04, Section: B.
500 $a Advisor: Ghahreman, Ahmad.
502 $a Thesis (Ph.D.)--Queen's University (Canada), 2023.
504 $a Includes bibliographical references
520 $a Gold is a highly valuable precious metal that plays a crucial role in both economic and technological domains. Hydrometallurgy is a widely adopted process for extracting gold from both primary ores and secondary sources. Adsorption is a popular solution purification technology used in hydrometallurgical process for gold solution concentration and recovery due to its low cost, high efficiency, and ecofriendliness. However, current gold adsorption techniques suffer from limitations such as low efficiency, poor selectivity, and solid-liquid separation problems. Magnetic adsorbents have emerged as a promising solution to overcome these challenges. This thesis presents three magnetic adsorbents that could potentially advance the gold adsorption process.In order to address the challenges of slow kinetics and solid-liquid separation associated with conventional activated carbon adsorbents, a one-pot solvothermal method was employed to synthesize magnetic activated carbon. The magnetic activated carbon synthesized through this approach displays excellent magnetism and a high specific surface area. Moreover, the magnetic activated carbon exhibited a remarkable gold recovery rate, which was considerably faster than the rate for the commercial granular activated carbon.A novel approach using magnetic iron sulfide (Fe3S4/Fe7S8) materials has been developed for the recovery of Au(III) through magnetic adsorption. Four different magnetic iron sulfide materials were synthesized using either hydrothermal or solvothermal methods, and their gold adsorption abilities were analyzed and compared. One of the materials demonstrated an exceptional adsorption capacity of 2020.7 mg/g, further tests confirmed its remarkable properties, including selectivity, magnetism, and recyclability. The adsorption-reduction mechanism was analyzed in detail using XRD and XPS analyses.A core-shell structured Fe3O4 CuS was further developed for gold recovery from chloride solution through in-situ reduction. The resulting gold-loaded adsorbent can be easily separated using an external magnet, offering advantages such as high efficiency, ease of operation, low cost, low materials consumption, and low waste generation. Results show that this adsorbent has an outstanding gold recovery efficiency and selectivity. This research shows the feasibility of using Fe3O4 CuS for efficient gold recovery, and provides insights into its adsorption behavior and mechanism.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Pollutants. $3 568170
650 4 $a Gold. $3 761231
650 4 $a Reagents. $3 1372660
650 4 $a Adsorbents. $3 1437785
650 4 $a Adsorption. $3 867181
650 4 $a Mining. $3 1413645
650 4 $a Magnetism. $3 579937
650 4 $a Chlorine. $3 1466018
650 4 $a Activated carbon. $3 1127668
650 4 $a Composite materials. $3 561730
650 4 $a Chloride. $3 1372665
650 4 $a Solvent extraction processes. $3 1466019
650 4 $a Recycling. $3 1466020
650 4 $a Sustainability. $3 793436
650 4 $a Heavy metals. $3 905028
650 4 $a Kinetics. $3 811965
650 4 $a Green chemistry. $3 981746
650 4 $a Chemical engineering. $3 555952
650 4 $a Chemistry. $3 593913
650 4 $a Materials science. $3 557839
655 7 $a Electronic books. $2 local $3 554714
690 $a 0551
690 $a 0640
690 $a 0542
690 $a 0485
690 $a 0629
690 $a 0794
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Queen's University (Canada). $3 1148613
773 0 $t Dissertations Abstracts International $g 85-04B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30616947 $z click for full text (PQDT)