國立虎尾科技大學 |

Areal Gear Metrology with Modified Flanks.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Areal Gear Metrology with Modified Flanks./
Author:	Ni, Kang.
Description:	1 online resource (188 pages)
Notes:	Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.
Subject:	Mechanical engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9780355495270

Areal Gear Metrology with Modified Flanks.
Ni, Kang.

Areal Gear Metrology with Modified Flanks. - 1 online resource (188 pages)

Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.

Thesis (Ph.D.)--The University of North Carolina at Charlotte, 2017.

Includes bibliographical references

Gears are critical mechanical components in power transmission systems, used across a board spectrum of industries such as automobile, aerospace and renewable energy. Given the advancement of design and manufacture of gears in the past decades, the current gear inspection based on line oriented geometric description and tactile measuring technology has shown several deficiencies (lack of areal information, high cycle time etc.), when assessing complex geometries on gears flanks. Advanced sensing methods can capture dense point clouds on a complete gear body, but no evaluation method is available to extract areal information from these point clouds. This imposes a technical gap for gear manufacturers and users since no quantitative parameters characterize the gear's deviations from its nominal geometry.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780355495270Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Areal Gear Metrology with Modified Flanks.
LDR:03626ntm a2200337K 4500 001 915006
005 20180727091503.5
006 m o u
007 cr mn||||a|a||
008 190606s2017 xx obm 000 0 eng d
020 $a 9780355495270
035 $a (MiAaPQ)AAI10643291
035 $a (MiAaPQ)uncc:11567
035 $a AAI10643291
040 $a MiAaPQ $b eng $c MiAaPQ
100 1 $a Ni, Kang. $3 1148647
245 1 0 $a Areal Gear Metrology with Modified Flanks.
264 0 $c 2017
300 $a 1 online resource (188 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.
500 $a Adviser: Gert Goch.
502 $a Thesis (Ph.D.)--The University of North Carolina at Charlotte, 2017.
504 $a Includes bibliographical references
520 $a Gears are critical mechanical components in power transmission systems, used across a board spectrum of industries such as automobile, aerospace and renewable energy. Given the advancement of design and manufacture of gears in the past decades, the current gear inspection based on line oriented geometric description and tactile measuring technology has shown several deficiencies (lack of areal information, high cycle time etc.), when assessing complex geometries on gears flanks. Advanced sensing methods can capture dense point clouds on a complete gear body, but no evaluation method is available to extract areal information from these point clouds. This imposes a technical gap for gear manufacturers and users since no quantitative parameters characterize the gear's deviations from its nominal geometry.
520 $a An implicit equation, which analytically describes the complete gear geometry including both flanks on all teeth is obtained, as a new interpretation of the plumb line distance equation. No nominal points are needed to obtain an areal distance map, which contains gear modification and deviation information. A set of new areal parameters are defined as an extension of standardized line oriented parameters. A novel evaluation method based on the principle of orthogonal decomposition using 2D Chebyshev polynomials is proposed to extract areal gear characteristics from an areal distance map. Numerical simulations are carried out by three numerical integration algorithms on four types of spatial point distributions, to obtain the areal parameters from discrete areal distance maps. Experimental verification using a calibrated gear modification artifact compared the new areal parameters with the standardized line oriented parameters. A conformance of +/- 1.5 mum between the evaluated areal parameters and the given certified line oriented parameter, obtained on four flank modifications and two pitch modifications, is achieved.
520 $a This dissertation offers a foundation for a paradigm shift of gear metrology, particularly gear evaluation algorithms. The proposed method enables an improved evaluation of areal flank data, collected by various sensing principles: tactile, optical and even computed tomography. It can form the basis for further studies of microstructure and surface topography of gear flanks. Thus, the developed evaluation method can improve future gear manufacturing processes and provide a holistic quality assessment of gear products.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a The University of North Carolina at Charlotte. $b Mechanical Engineering. $3 1148582
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10643291 $z click for full text (PQDT)