鋁合金.
Overview
| Works: | 19 works in 19 publications in 19 languages | |
|---|---|---|
Titles
下控制臂輕量化有限元分析參數最佳化 = = Optimization on Lower Controlling Arms by Finite Analysis Design /
by:
(Language materials, printed)
保護氣體成分對鋁合金TIG-MIG複合銲接特性之影響 = = Influences of Shielding Gas Compositions on the TIG-MIG Hybrid Welding Characteristics of Aluminum Alloy /
by:
(Language materials, printed)
鋁合金葉子板引伸成形回彈分析 = = An Analysis of Springback Compensation for the Aluminum Alloy Fender Panel /
by:
(Language materials, printed)
5083鋁合金TIG-MIG複合銲接之顯微組織及機械性質研究 = = Study on the Microstructure Characteristics and Mechanical Properties of TIG-MIG Hybrid Welded Joint for 5083 Aluminum Alloy /
by:
(Language materials, printed)
鈰含量對鋁鎂矽合金顯微結構、硬度和腐蝕行為之影響 = = Effect of Cerium Content on the Microstructure, Hardness and Corrosion Behavior of Al-Mg-Si Alloy /
by:
(Language materials, printed)
衝頭伺服運動曲線應用於鋁合金鍛造成形 = = The Forging of Aluminum Alloy with Servo Motion Curve of Punch /
by:
(Language materials, printed)
鋁合金雙層複合材料A356及6063之半固態鍛造成形探討 = = The Development of Semi-solid Forging for A356 and 6063 Alloy Double Layer Composite Material /
by:
(Language materials, printed)
摩擦攪拌銲接鎂基/鋁基異質合金之銲道微觀組織及拉伸機械性質研究 = = Welding Microstructural Feature and Tensile Mechanical Properties of Friction Stir Welding Dissimilar Mg and Al Alloys /
by:
(Language materials, printed)
摩擦攪拌製程應用於純銅強化鋁合金之顯微組織與機械性質研究 = = Microstructure and Mechanical Properties of Friction Stir Processing Pure Copper Reinforced Aluminum Alloy /
by:
(Language materials, printed)
鋁合金機車煞車拉桿之模具開發與鍛造成形 = = Die Development and Forging of Aluminum Alloy Motorcycle Brake Levers /
by:
(Language materials, printed)
鋁合金工件側銑削之表面品質研究 = = Study of the Surface Quality for Aluminum Workpieces by Side Milling /
by:
(Language materials, printed)
氮化鈦增強鋁合金複合材料 = = Aluminum Alloy Composite Reinforced by Titanium Nitride /
by:
(Language materials, printed)
銑削7075鋁合金之端銑刀優化設計研究 = = The Study of Optimal End Mills Design for Milling 7075 Aluminum Alloy /
by:
(Language materials, printed)
熱處理型鋁合金摩擦攪拌銲接銲道的材料性質研究 = = A Study on the Material Properties of Heat Aluminum Alloy after Friction Stir Welding /
by:
(Language materials, printed)
製程方法對碳化鈦增強鋁合金複合材料之影響 = = The Effect of Process Methods on Titanium Carbide Reinforced Aluminum Alloy Composites /
by:
(Language materials, printed)
氮化鈦強化鋁合金複合材料的疲勞性質探討 = = Fatigue Properties of Aluminum Alloy Composite Reinforced by Titanium Nitride /
by:
(Language materials, printed)
摩擦攪拌複合銲接對鋁合金的顯微組織及腐蝕特性之影響 = = Microstructure and Corrosion Characteristics of Hybrid Friction Stir Welded Aluminum Alloy /
by:
(Language materials, printed)
Show more
Fewer
Subjects