國立虎尾科技大學 |

Acoustic-Based Hand Biometric Sensing for User Verification on Mobile Devices.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Acoustic-Based Hand Biometric Sensing for User Verification on Mobile Devices./
Author:	Yang, Yilin.
Description:	1 online resource (160 pages)
Notes:	Source: Dissertations Abstracts International, Volume: 84-10, Section: B.
Contained By:	Dissertations Abstracts International84-10B.
Subject:	Computer engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9798379437794

Acoustic-Based Hand Biometric Sensing for User Verification on Mobile Devices.
Yang, Yilin.

Acoustic-Based Hand Biometric Sensing for User Verification on Mobile Devices. - 1 online resource (160 pages)

Source: Dissertations Abstracts International, Volume: 84-10, Section: B.

Thesis (Ph.D.)--Rutgers The State University of New Jersey, School of Graduate Studies, 2023.

Includes bibliographical references

Acoustic frequencies, commonly approximated from 20 Hz to 20 kHz, possess great potential for wireless sensing applications in the mobile Internet-of-Things (IoT). However, modern mobile IoT has underutilized this spectrum relative to higher frequency bands (i.e., MHz or higher), leaving much of this potential untapped. Inaudible acoustic sensing is both possible and practical on mobile devices (e.g., smartphones, smartwatches, tablets) for myriads of essential daily functions, including facilitating and securing telecommunications through user verification. Such feats are possible due to the propagation behaviors of acoustic frequencies near the thresholds of human hearing ability (i.e., under 500Hz or over 16 kHz) when travelling through air and solids. Acoustic signals are attenuated by the material they propagate through. Ordinarily regarded as interference, this attenuation can also reveal information about the propagation medium, not only if it was a human body, but if it was a specific body. Thus, we allow mobile devices to identify users from mere physical contact and respond accordingly, such as by locking or unlocking access to data. This dissertation aims to demonstrate these ideas by studying acoustic behavior on mobile devices and acoustic responsiveness to different user hands and bodies.We first investigate the versatility of inaudible acoustic frequencies and their aptitude at transferring information between transmitter and receiver sensors. We theoretically model speaker non-linearity and transmission power, designing communication schemes utilizing two speakers to achieve inaudibility. At the receiver side, we double the coefficient of received signal strength by leveraging microphone non-linearity. Experimental results suggest that our system can achieve over 2m range and over 17 kbps throughput, achieving longer range and/or higher throughput than similar works while remaining inaudible.We then study the ability of acoustic signals to capture user-specific information when travelling through the hand that holds the device. We propose a non-intrusive hand sensing technique to derive unique acoustic features in both the time and frequency domains, which can effectively capture the physiological and behavioral traits of a user's hand (e.g., hand contours, finger sizes, holding strengths, and holding styles). Learning-based algorithms are developed to robustly identify the user under various environments and conditions. We conduct extensive experiments with 20 participants, gathering 80,000 hand geometry samples using different smartphone and tablet models across 160 key use case scenarios. Our results were shown to identify users with over 94% accuracy, without requiring any active user input.Having verified the concept on smartphones, we then extend the study to smartwatches, which possess considerably less powerful sensors and new design constraints. Our redesigned system employs a challenge-response process to passively capture behavioral and physiological biometrics from an unobtrusive touch gesture using low-fidelity acoustic and vibration smartwatch sensors. We develop a cross-domain sensing technique (i.e., measuring acoustic signals in the vibration domain) to capture robust and effective features specific to user fingers and improve robustness. A low-cost profile matching-based classifier is designed to enable stand-alone user authentication on smartwatches. Experiments with 54 participants using varied hardware, environments, noise levels, user motions, and other impact factors, achieved around 97% true positive rate and 2% false positive rate in user authentication.Finally, we explore how structural characteristics of the mobile device can heighten the sensitivity of acoustic sensing. We thus propose an acoustic sensing system for smartphones that leverages smartphone cases modified with internal mini-structures to capture finger-tip biometric information. The design of the mini-structure allows developers to control the behavior of structure-borne sound such that unique responses are produced when different users and fingers touch the smartphone case at different locations. Experiments with 46 users over 10 weeks illustrate how we can differentiate users with over 94% accuracy at a 5% false positive rate.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798379437794Subjects--Topical Terms:

569006
Computer engineering.
Subjects--Index Terms:

Acoustic sensingIndex Terms--Genre/Form:

554714
Electronic books.

Acoustic-Based Hand Biometric Sensing for User Verification on Mobile Devices.
LDR:05726ntm a22003977 4500 001 1143731
005 20240517104938.5
006 m o d
007 cr mn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798379437794
035 $a (MiAaPQ)AAI30311864
035 $a AAI30311864
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Yang, Yilin. $3 1468513
245 1 0 $a Acoustic-Based Hand Biometric Sensing for User Verification on Mobile Devices.
264 0 $c 2023
300 $a 1 online resource (160 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 84-10, Section: B.
500 $a Advisor: Chen, Yingying.
502 $a Thesis (Ph.D.)--Rutgers The State University of New Jersey, School of Graduate Studies, 2023.
504 $a Includes bibliographical references
520 $a Acoustic frequencies, commonly approximated from 20 Hz to 20 kHz, possess great potential for wireless sensing applications in the mobile Internet-of-Things (IoT). However, modern mobile IoT has underutilized this spectrum relative to higher frequency bands (i.e., MHz or higher), leaving much of this potential untapped. Inaudible acoustic sensing is both possible and practical on mobile devices (e.g., smartphones, smartwatches, tablets) for myriads of essential daily functions, including facilitating and securing telecommunications through user verification. Such feats are possible due to the propagation behaviors of acoustic frequencies near the thresholds of human hearing ability (i.e., under 500Hz or over 16 kHz) when travelling through air and solids. Acoustic signals are attenuated by the material they propagate through. Ordinarily regarded as interference, this attenuation can also reveal information about the propagation medium, not only if it was a human body, but if it was a specific body. Thus, we allow mobile devices to identify users from mere physical contact and respond accordingly, such as by locking or unlocking access to data. This dissertation aims to demonstrate these ideas by studying acoustic behavior on mobile devices and acoustic responsiveness to different user hands and bodies.We first investigate the versatility of inaudible acoustic frequencies and their aptitude at transferring information between transmitter and receiver sensors. We theoretically model speaker non-linearity and transmission power, designing communication schemes utilizing two speakers to achieve inaudibility. At the receiver side, we double the coefficient of received signal strength by leveraging microphone non-linearity. Experimental results suggest that our system can achieve over 2m range and over 17 kbps throughput, achieving longer range and/or higher throughput than similar works while remaining inaudible.We then study the ability of acoustic signals to capture user-specific information when travelling through the hand that holds the device. We propose a non-intrusive hand sensing technique to derive unique acoustic features in both the time and frequency domains, which can effectively capture the physiological and behavioral traits of a user's hand (e.g., hand contours, finger sizes, holding strengths, and holding styles). Learning-based algorithms are developed to robustly identify the user under various environments and conditions. We conduct extensive experiments with 20 participants, gathering 80,000 hand geometry samples using different smartphone and tablet models across 160 key use case scenarios. Our results were shown to identify users with over 94% accuracy, without requiring any active user input.Having verified the concept on smartphones, we then extend the study to smartwatches, which possess considerably less powerful sensors and new design constraints. Our redesigned system employs a challenge-response process to passively capture behavioral and physiological biometrics from an unobtrusive touch gesture using low-fidelity acoustic and vibration smartwatch sensors. We develop a cross-domain sensing technique (i.e., measuring acoustic signals in the vibration domain) to capture robust and effective features specific to user fingers and improve robustness. A low-cost profile matching-based classifier is designed to enable stand-alone user authentication on smartwatches. Experiments with 54 participants using varied hardware, environments, noise levels, user motions, and other impact factors, achieved around 97% true positive rate and 2% false positive rate in user authentication.Finally, we explore how structural characteristics of the mobile device can heighten the sensitivity of acoustic sensing. We thus propose an acoustic sensing system for smartphones that leverages smartphone cases modified with internal mini-structures to capture finger-tip biometric information. The design of the mini-structure allows developers to control the behavior of structure-borne sound such that unique responses are produced when different users and fingers touch the smartphone case at different locations. Experiments with 46 users over 10 weeks illustrate how we can differentiate users with over 94% accuracy at a 5% false positive rate.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Computer engineering. $3 569006
650 4 $a Acoustics. $3 670692
650 4 $a Information technology. $3 559429
650 4 $a Electrical engineering. $3 596380
653 $a Acoustic sensing
653 $a Biometric sensing
653 $a Mobile devices
653 $a User verification
655 7 $a Electronic books. $2 local $3 554714
690 $a 0464
690 $a 0489
690 $a 0544
690 $a 0986
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Rutgers The State University of New Jersey, School of Graduate Studies. $b Electrical and Computer Engineering. $3 1241232
773 0 $t Dissertations Abstracts International $g 84-10B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30311864 $z click for full text (PQDT)