單面輸出低密度波長分波多工器之設計與實作測試 = The Design ...
王錦祥

 

  • 單面輸出低密度波長分波多工器之設計與實作測試 = The Design and Implementation Test of Unilateral Exportation Coarse Wavelength Division Multiplexer
  • 紀錄類型: 書目-語言資料,印刷品 : 單行本
    並列題名: The Design and Implementation Test of Unilateral Exportation Coarse Wavelength Division Multiplexer
    作者: 王錦祥,
    其他團體作者: 國立虎尾科技大學
    出版地: [雲林縣]
    出版者: 撰者; 撰者;
    出版年: 民96[2007]
    面頁冊數: 56面圖,表 : 30公分;
    標題: 低密度波長分波多工器
    標題: Coarse Wavelength Division Multiplexer(CWDM)
    電子資源: http://140.130.12.251/ETD-db/ETD-search-c/view_etd?URN=etd-0125107-223231
    摘要註: 本研究目的是為設計實作一種單面輸出低密度波長分波多工器(Coarse Wavelength Division Multiplexer)簡稱(CWDM),其為一種單面輸出低密度波長分波多工器,係因傳統低密度波長分波多工器體積大、成本高、製造程序多、工時長、技術門檻高、良率低及可回收率低等缺點,故有需要針對這些缺點提出改良設計,故本研究為設計製作一種低密度波長分波多工器,可改善傳統製作之問題。 對於低密度波長分波多工器之研製,在了解各種低密度波長分波多工器設計概念後,本論文在實驗室中以漸變折射率透鏡(Gradient-Index Lens,GRIN Lens)單芯光纖導管(Single Fiber Pigtail)自製了長工作距離的單芯光纖準直器(Single Fiber Collimator),再將前述製作方式延伸,進而發展設計製作成一種低密度波長分波多工器。 The purpose of this study is to design and make a new kind of Coarse Wavelength Division Multiplexer (CWDM) . The traditional CWDM has many shortcomings that includes large cubage , high costs , complicated multifarious procedures , long working-hours , difficult technology , lower yields and the low rate of reclamation of the production. So we need to improve and develop the process for these disadvantages of CWDM . Furthermore , in this thesis , we demonstrate a kind of CWDM. Efforts were made for the CWDM to improve shortcomings of traditional process. After understanding the conception of that various kinds of CWDM for researching of CWDM , this thesis uses Gradient-Index Lens (GRIN Lens)and Single Fiber Pigtail (SFP) making the long-working distance Single Fiber Collimator (SFC) by oneself in laboratory . And the method of above-mentioned is extended to develop the new kind of CWDM .
多媒體
評論
Export
取書館別
 
 
變更密碼[密碼必須為2種組合(英文和數字)及長度為10碼以上]
登入