聚碳酸酯/聚甲基丙烯酸甲酯共混駐極體薄膜之製備與分析 = Prepara...
Hsin Her Yu

 

  • 聚碳酸酯/聚甲基丙烯酸甲酯共混駐極體薄膜之製備與分析 = Preparation and characterization of the PC/PMMA blending electret films
  • 紀錄類型: 書目-語言資料,印刷品 : 單行本
    並列題名: Preparation and characterization of the PC/PMMA blending electret films
    作者: 王順德,
    其他作者: 游信和,
    其他團體作者: 國立虎尾科技大學
    出版地: 雲林縣
    出版者: 國立虎尾科技大學;
    出版年: 民97[2008]
    版本: 初版
    面頁冊數: 56面圖,表 : 30公分;
    標題: 高分子駐極體,接觸式極化,雙折射,電光係數
    標題: Birefringence
    電子資源: http://140.130.12.251/ETD-db/ETD-search-c/view_etd?URN=etd-0129108-211642
    摘要註: 本論文採用不同比例的聚碳酸酯(polycarbonate, PC)與聚甲基丙烯酸甲酯(poly methl methacrylate, PMMA)以溶液澆注法製作共混薄膜。薄膜之性質及結構則由FTIR(Fourier Transform infrared spectroscope)、可見光譜儀、X射線繞射儀(X-ray diffractometer)、雙折射特性量測,以及電光特性量測,採用接觸式極化(contact poling)的方式進行循環極化,極化前後輔以各種分析儀器進行分析比較。本研究發現,當PC含量增加時,雙折射率也會上升,此外,亦發現極化過後隨著PC添加量增加,PC分子會牽引PMMA轉動,IR吸收值明顯下降,證明了極化後分子偶極從原本的振動方向偏轉到電場方向,同時所製得高穿透率之電光薄膜經由穿透式電光薄膜量測系統量測換算出共混薄膜之電光係數(r33)之值。 Different ratios of PC �polycarbonate� and PMMA (poly methl methacrylate) blending films were prepared by solution casting method. The structures of polymer were investigated by Fourier transform infrared spectroscopy (FTIR), X-ray, UV-visible spectrum. The polymer electret was prepared by contact poling, and the optical birefringence and the electro-optic (E-O) effect property was measured after poling immediately. The birefringence of the polymer electret were increased as PC content increasing. After poling, the IR absorbance were decreased as the ratio of PC increased. The dipoles of the blending film were transformed from original direction to the electric-field direction. E-O coefficient r33 of the poled polymer electret were calculated after transmission E-O effect measuring in this study.
館藏
  • 2 筆 • 頁數 1 •
 
T000826 圖書館B1F 博碩士論文專區 不流通(NON_CIR) 碩士論文(TM) TM 008.166M 1022 97 一般使用(Normal) 在架 0
T000827 圖書館B1F 可外借論文區 不流通(NON_CIR) 一般圖書 008.166M 1022 97 c.2 一般使用(Normal) 在架 0
  • 2 筆 • 頁數 1 •
多媒體
評論
Export
取書館別
 
 
變更密碼[密碼必須為2種組合(英文和數字)及長度為10碼以上]
登入