國立虎尾科技大學 |

Geometry of Surfaces = A Practical Guide for Mechanical Engineers /

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Geometry of Surfaces/ by Stephen P. Radzevich.
其他題名:	A Practical Guide for Mechanical Engineers /
作者:	Radzevich, Stephen P.
面頁冊數:	XXVI, 303 p. 182 illus., 7 illus. in color.online resource. :
Contained By:	Springer Nature eBook
標題:	Surface and Interface Science, Thin Films. -
電子資源:	https://doi.org/10.1007/978-3-030-22184-3
ISBN:	9783030221843

Geometry of Surfaces = A Practical Guide for Mechanical Engineers /
Radzevich, Stephen P.

Geometry of SurfacesA Practical Guide for Mechanical Engineers /[electronic resource] :by Stephen P. Radzevich. - 2nd ed. 2020. - XXVI, 303 p. 182 illus., 7 illus. in color.online resource.

Part 1. Part Surfaces -- Geometry of a Part Surface -- On a Possibility of Classification of Part Surfaces -- Part 2. On a Possibility of Classification of Part Surfaces -- Early Works in the Field of Contact Geometry of Surfaces -- An Analytical Method based on Second Fundamental Forms of the Contacting Part Surfaces -- Indicatrix of Conformity at Point of Contact of Two Smooth Regular Part Surfaces in the First Order of Tangency -- Plücker Conoid: More Characteristic Curves -- Possible Kinds of Contact of Two Smooth Regular Part Surfaces in the First Order of Tangency -- Part 3. Mapping of Contacting Part Surfaces -- ℝ-Mapping of Interacting Part Surfaces -- Generation of Enveloping Surfaces: General Consideration -- Generation of Enveloping Surfaces: Special Cases -- Conclusion -- Appendix A: Elements of Vector Calculus -- Appendix B: Elements of Coordinate Systems Transformations -- Appendix C: Change of Surface Parameters -- Appendix D: Closest Distance of Approach between Two Part Surfaces.

This updated and expanded edition presents a highly accurate specification for part surface machining. Precise specification reduces the cost of this widely used industrial operation as accurately specified and machined part surfaces do not need to undergo costly final finishing. Dr. Radzevich describes techniques in this volume based primarily on classical differential geometry of surfaces. He then transitions from differential geometry of surfaces to engineering geometry of surfaces, and examines how part surfaces are either machined themselves, or are produced by tools with surfaces that are precisely machined. The book goes on to explain specific methods, such as derivation of planar characteristic curves based on Plücker conoid constructed at a point of the part surface, and that analytical description of part surface is vital for surfaces machined using CNC technology, and especially so for multi-axes NC machines. Providing readers with a powerful tool for analytical description of part surfaces machined on conventional machine tools and numerically controlled machines, this book maximizes understanding on optimal treatment of part surfaces to meet the requirements of today’s high tech industry. Expands explanation of reversibly-enveloping surfaces (RES), proposing a qualitative (analytical) approach of RES in this new edition; Provides an analytical description of part surfaces to be machined and elucidates the principal difference between differential geometry of surfaces and the engineering of part surfaces; Focuses the readers’ attention on circular diagrams, simple but powerful analytic constructs, erected at a point of a part surface ; Illustrates a practical means of mapping of one part surface onto another part surface, with emphasis on a newly developed ℝ-Mapping of part surfaces.

ISBN: 9783030221843

Standard No.: 10.1007/978-3-030-22184-3doiSubjects--Topical Terms:

782551
Surface and Interface Science, Thin Films.

LC Class. No.: TA329-348

Dewey Class. No.: 620.00151

Geometry of Surfaces = A Practical Guide for Mechanical Engineers /
LDR:04201nam a22003975i 4500 001 1020565
003 DE-He213
005 20200706001038.0
007 cr nn 008mamaa
008 210318s2020 gw | s |||| 0|eng d
020 $a 9783030221843 $9 978-3-030-22184-3
024 7 $a 10.1007/978-3-030-22184-3 $2 doi
035 $a 978-3-030-22184-3
050 4 $a TA329-348
072 7 $a TBJ $2 bicssc
072 7 $a TEC009000 $2 bisacsh
072 7 $a TBJ $2 thema
082 0 4 $a 620.00151 $2 23
100 1 $a Radzevich, Stephen P. $e author. $4 aut $4 http://id.loc.gov/vocabulary/relators/aut $3 1316063
245 1 0 $a Geometry of Surfaces $h [electronic resource] : $b A Practical Guide for Mechanical Engineers / $c by Stephen P. Radzevich.
250 $a 2nd ed. 2020.
264 1 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2020.
300 $a XXVI, 303 p. 182 illus., 7 illus. in color. $b online resource.
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
347 $a text file $b PDF $2 rda
505 0 $a Part 1. Part Surfaces -- Geometry of a Part Surface -- On a Possibility of Classification of Part Surfaces -- Part 2. On a Possibility of Classification of Part Surfaces -- Early Works in the Field of Contact Geometry of Surfaces -- An Analytical Method based on Second Fundamental Forms of the Contacting Part Surfaces -- Indicatrix of Conformity at Point of Contact of Two Smooth Regular Part Surfaces in the First Order of Tangency -- Plücker Conoid: More Characteristic Curves -- Possible Kinds of Contact of Two Smooth Regular Part Surfaces in the First Order of Tangency -- Part 3. Mapping of Contacting Part Surfaces -- ℝ-Mapping of Interacting Part Surfaces -- Generation of Enveloping Surfaces: General Consideration -- Generation of Enveloping Surfaces: Special Cases -- Conclusion -- Appendix A: Elements of Vector Calculus -- Appendix B: Elements of Coordinate Systems Transformations -- Appendix C: Change of Surface Parameters -- Appendix D: Closest Distance of Approach between Two Part Surfaces.
520 $a This updated and expanded edition presents a highly accurate specification for part surface machining. Precise specification reduces the cost of this widely used industrial operation as accurately specified and machined part surfaces do not need to undergo costly final finishing. Dr. Radzevich describes techniques in this volume based primarily on classical differential geometry of surfaces. He then transitions from differential geometry of surfaces to engineering geometry of surfaces, and examines how part surfaces are either machined themselves, or are produced by tools with surfaces that are precisely machined. The book goes on to explain specific methods, such as derivation of planar characteristic curves based on Plücker conoid constructed at a point of the part surface, and that analytical description of part surface is vital for surfaces machined using CNC technology, and especially so for multi-axes NC machines. Providing readers with a powerful tool for analytical description of part surfaces machined on conventional machine tools and numerically controlled machines, this book maximizes understanding on optimal treatment of part surfaces to meet the requirements of today’s high tech industry. Expands explanation of reversibly-enveloping surfaces (RES), proposing a qualitative (analytical) approach of RES in this new edition; Provides an analytical description of part surfaces to be machined and elucidates the principal difference between differential geometry of surfaces and the engineering of part surfaces; Focuses the readers’ attention on circular diagrams, simple but powerful analytic constructs, erected at a point of a part surface ; Illustrates a practical means of mapping of one part surface onto another part surface, with emphasis on a newly developed ℝ-Mapping of part surfaces.
650 2 4 $a Surface and Interface Science, Thin Films. $3 782551
650 2 4 $a Differential Geometry. $3 671118
650 2 4 $a Engineering Design. $3 670857
650 1 4 $a Engineering Mathematics. $3 1203947
650 0 $a Thin films. $3 560219
650 0 $a Interfaces (Physical sciences). $3 795468
650 0 $a Surfaces (Physics). $3 716359
650 0 $a Differential geometry. $3 882213
650 0 $a Engineering design. $3 560518
650 0 $a Engineering mathematics. $3 562757
710 2 $a SpringerLink (Online service) $3 593884
773 0 $t Springer Nature eBook
776 0 8 $i Printed edition: $z 9783030221836
776 0 8 $i Printed edition: $z 9783030221850
776 0 8 $i Printed edition: $z 9783030221867
856 4 0 $u https://doi.org/10.1007/978-3-030-22184-3
912 $a ZDB-2-ENG
912 $a ZDB-2-SXE
950 $a Engineering (SpringerNature-11647)
950 $a Engineering (R0) (SpringerNature-43712)