語系:
繁體中文
English
說明(常見問題)
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Machining and Machinability of Fiber...
~
Azmi, Azwan Iskandar.
Machining and Machinability of Fiber Reinforced Polymer Composites
紀錄類型:
書目-語言資料,印刷品 : Monograph/item
正題名/作者:
Machining and Machinability of Fiber Reinforced Polymer Composites/ edited by Mohamed Thariq Hameed Sultan, Azwan Iskandar Azmi, Mohd Shukry Abd Majid, Mohd Ridzuan Mohd Jamir, Naheed Saba.
其他作者:
Saba, Naheed.
面頁冊數:
XIV, 335 p. 221 illus., 148 illus. in color.online resource. :
Contained By:
Springer Nature eBook
標題:
Structural Materials. -
電子資源:
https://doi.org/10.1007/978-981-33-4153-1
ISBN:
9789813341531
Machining and Machinability of Fiber Reinforced Polymer Composites
Machining and Machinability of Fiber Reinforced Polymer Composites
[electronic resource] /edited by Mohamed Thariq Hameed Sultan, Azwan Iskandar Azmi, Mohd Shukry Abd Majid, Mohd Ridzuan Mohd Jamir, Naheed Saba. - 1st ed. 2021. - XIV, 335 p. 221 illus., 148 illus. in color.online resource. - Composites Science and Technology ,2662-1827. - Composites Science and Technology ,.
Chapter 1: Critical thrust force analyses and their effects on drilling FRP composites -- Chapter 2: Effect of drill geometry design on reduction of delamination damage in drilling FRP composites -- Chapter 3: Chapter 4: Innovative method for quantifying delamination damage in drilling FRP composites -- Chapter 5: Numerical and analytical approaches in drilling or machining of FRP composites -- Chapter 6: Cryogenics and thermal effects of drilling FRP composites on delamination damage and surface integrity -- Chapter 7: Study on tool wear and its effect on FRP composites machining -- Chapter 8: Tribological aspect in machining synthetic and natural fibre composites -- Chapter 9: Feed control method as a new method to reduce delamination during drilling of FRP -- Chapter 10: Chapter: Impact of induced damage due to drilling and machining on mechanical properties of FRP composites (including tensile and flexural strength) -- Chapter 11: Recent advances in drilling and machining natural fibre or cellulose fibre composite -- Chapter 12: Chapter: Experimental and analytical studies of abrasive water-jet machining of FRP composites -- Chapter 13: Chapter: Novel method for laser processing of FRP composites -- Chapter 14: Vibration assisted drilling and milling for reduction of damage on FRP composites -- Chapter 15: Energy demand in machining FRP composites -- Chapter 16: Safety and environmental issues or concern in machining FRP composites.
This book covers current advances and practices in machining fibre-reinforced polymer composites under various conventional and nonconventional processes. It presents recent research and practices for effective and efficient machining of difficult-to-cut material, providing the technological ‘know-how’ on delamination-free of drilling, milling, trimming, and other cutting processes on fibre-reinforced polymer composites. It also guides the reader on the selection of optimum machining parameters, tool materials, as well as tool geometry. This book is of interest to academicians, students, researchers, practitioners, and industrialists working in aerospace, automotive, marine, and construction industries. .
ISBN: 9789813341531
Standard No.: 10.1007/978-981-33-4153-1doiSubjects--Topical Terms:
677176
Structural Materials.
LC Class. No.: TP807-823
Dewey Class. No.: 620.14
Machining and Machinability of Fiber Reinforced Polymer Composites
LDR
:03747nam a22004215i 4500
001
1051011
003
DE-He213
005
20210930161422.0
007
cr nn 008mamaa
008
220103s2021 si | s |||| 0|eng d
020
$a
9789813341531
$9
978-981-33-4153-1
024
7
$a
10.1007/978-981-33-4153-1
$2
doi
035
$a
978-981-33-4153-1
050
4
$a
TP807-823
050
4
$a
TA418.9.C6
072
7
$a
TDCQ
$2
bicssc
072
7
$a
TEC021010
$2
bisacsh
072
7
$a
TDC
$2
thema
082
0 4
$a
620.14
$2
23
245
1 0
$a
Machining and Machinability of Fiber Reinforced Polymer Composites
$h
[electronic resource] /
$c
edited by Mohamed Thariq Hameed Sultan, Azwan Iskandar Azmi, Mohd Shukry Abd Majid, Mohd Ridzuan Mohd Jamir, Naheed Saba.
250
$a
1st ed. 2021.
264
1
$a
Singapore :
$b
Springer Singapore :
$b
Imprint: Springer,
$c
2021.
300
$a
XIV, 335 p. 221 illus., 148 illus. in color.
$b
online resource.
336
$a
text
$b
txt
$2
rdacontent
337
$a
computer
$b
c
$2
rdamedia
338
$a
online resource
$b
cr
$2
rdacarrier
347
$a
text file
$b
PDF
$2
rda
490
1
$a
Composites Science and Technology ,
$x
2662-1827
505
0
$a
Chapter 1: Critical thrust force analyses and their effects on drilling FRP composites -- Chapter 2: Effect of drill geometry design on reduction of delamination damage in drilling FRP composites -- Chapter 3: Chapter 4: Innovative method for quantifying delamination damage in drilling FRP composites -- Chapter 5: Numerical and analytical approaches in drilling or machining of FRP composites -- Chapter 6: Cryogenics and thermal effects of drilling FRP composites on delamination damage and surface integrity -- Chapter 7: Study on tool wear and its effect on FRP composites machining -- Chapter 8: Tribological aspect in machining synthetic and natural fibre composites -- Chapter 9: Feed control method as a new method to reduce delamination during drilling of FRP -- Chapter 10: Chapter: Impact of induced damage due to drilling and machining on mechanical properties of FRP composites (including tensile and flexural strength) -- Chapter 11: Recent advances in drilling and machining natural fibre or cellulose fibre composite -- Chapter 12: Chapter: Experimental and analytical studies of abrasive water-jet machining of FRP composites -- Chapter 13: Chapter: Novel method for laser processing of FRP composites -- Chapter 14: Vibration assisted drilling and milling for reduction of damage on FRP composites -- Chapter 15: Energy demand in machining FRP composites -- Chapter 16: Safety and environmental issues or concern in machining FRP composites.
520
$a
This book covers current advances and practices in machining fibre-reinforced polymer composites under various conventional and nonconventional processes. It presents recent research and practices for effective and efficient machining of difficult-to-cut material, providing the technological ‘know-how’ on delamination-free of drilling, milling, trimming, and other cutting processes on fibre-reinforced polymer composites. It also guides the reader on the selection of optimum machining parameters, tool materials, as well as tool geometry. This book is of interest to academicians, students, researchers, practitioners, and industrialists working in aerospace, automotive, marine, and construction industries. .
650
2 4
$a
Structural Materials.
$3
677176
650
2 4
$a
Materials Engineering.
$3
1062318
650
2 4
$a
Manufacturing, Machines, Tools, Processes.
$3
1226012
650
1 4
$a
Ceramics, Glass, Composites, Natural Materials.
$3
1116204
650
0
$a
Structural materials.
$3
1253576
650
0
$a
Engineering—Materials.
$3
1253659
650
0
$a
Manufactures.
$3
680602
650
0
$a
Composite materials.
$3
561730
650
0
$a
Composites (Materials).
$3
1253658
650
0
$a
Glass.
$3
681282
650
0
$a
Ceramics.
$3
673527
700
1
$a
Saba, Naheed.
$e
editor.
$4
edt
$4
http://id.loc.gov/vocabulary/relators/edt
$3
1322288
700
1
$a
Jamir, Mohd Ridzuan Mohd.
$e
editor.
$4
edt
$4
http://id.loc.gov/vocabulary/relators/edt
$3
1355466
700
1
$a
Majid, Mohd Shukry Abd.
$e
editor.
$4
edt
$4
http://id.loc.gov/vocabulary/relators/edt
$3
1355465
700
1
$a
Azmi, Azwan Iskandar.
$e
editor.
$4
edt
$4
http://id.loc.gov/vocabulary/relators/edt
$3
1355120
700
1
$a
Hameed Sultan, Mohamed Thariq.
$e
editor.
$4
edt
$4
http://id.loc.gov/vocabulary/relators/edt
$3
1354588
710
2
$a
SpringerLink (Online service)
$3
593884
773
0
$t
Springer Nature eBook
776
0 8
$i
Printed edition:
$z
9789813341524
776
0 8
$i
Printed edition:
$z
9789813341548
776
0 8
$i
Printed edition:
$z
9789813341555
830
0
$a
Composites Science and Technology ,
$x
2662-1819
$3
1319604
856
4 0
$u
https://doi.org/10.1007/978-981-33-4153-1
912
$a
ZDB-2-CMS
912
$a
ZDB-2-SXC
950
$a
Chemistry and Materials Science (SpringerNature-11644)
950
$a
Chemistry and Material Science (R0) (SpringerNature-43709)
筆 0 讀者評論
多媒體
評論
新增評論
分享你的心得
Export
取書館別
處理中
...
變更密碼[密碼必須為2種組合(英文和數字)及長度為10碼以上]
登入