國立虎尾科技大學 |

Proceedings of MEACM 2020 = Mechanical Engineering and Applied Composite Materials /

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Proceedings of MEACM 2020/ edited by Lifang Zheng, Chaoyang Sun, Kheng-Lim Goh.
Reminder of title:	Mechanical Engineering and Applied Composite Materials /
other author:	Zheng, Lifang.
Description:	XI, 495 p. 304 illus., 221 illus. in color.online resource. :
Contained By:	Springer Nature eBook
Subject:	Machinery. -
Online resource:	https://doi.org/10.1007/978-3-030-67958-3
ISBN:	9783030679583

Proceedings of MEACM 2020 = Mechanical Engineering and Applied Composite Materials /
Proceedings of MEACM 2020Mechanical Engineering and Applied Composite Materials /[electronic resource] :edited by Lifang Zheng, Chaoyang Sun, Kheng-Lim Goh. - 1st ed. 2021. - XI, 495 p. 304 illus., 221 illus. in color.online resource. - Mechanisms and Machine Science,992211-0992 ;. - Mechanisms and Machine Science,30.

Effect of equal channel angular pressing on the microstructure and properties of pure Mg and the deformation mechanism -- Research on Ice-induced Vibration Test of Inland Icebreaker -- Critical Analysis of the Productivity of Well 2L after Foam Acid Diversion -- Investigation of spin pinned effect in Ni/NiFe/Ni trilayers via ferromagnetic resonance spectroscopy -- Residual stress evaluation of metallic component based on the synthetic nonlinear coefficient -- Molding process of automotive hemp fiber reinforced composites -- Trajectory control of mobile robot based on novel gesture detection -- Development of Personalized Wind Handling System using Infrared Ray Sensor -- Key Design Technologies of New Cable-Stayed and Steel Truss Composite Bridge -- The Role of Composite Materials to Rehabilitate Plant Piping -- Study on piezoelectric stack performance for linear ultrasonic motor -- Study on vibration and acoustic characteristics of ship stern structure by propeller excitations -- Nonlinear Wave Loads' Prediction on Ultra Large Containerships -- The Design of a Backpack System to Meet the Requirements of New Type of Individual Combat -- Study on Decarbonization of ZGMn13Cr2 during Heat Treatment -- Numerical Simulation of Aluminum Alloy Connecting Rod with Multi-Wedge Cross Wedge Rolling -- Effect of Water Temperature on Quenching Residual Stress of Aluminum Alloy Thick Plate -- Study on the Motion and Friction Mechanism of Flexible Roller in Space Roll ring -- Analysis on the Influence of Bearing Stiffness on Critical Speed of Rotor System of a New Scroll Compressor -- Experimental and Simulation Data-Driven Rolling Bearing Fault Size Quantitative Diagnosis in Big Data Era -- Research on assembly error transmission of small displacement spinor based on state space model -- Synthesis of Fluorescent Carbon dots from glucose and calcium carbonate and their application in the beverage -- Fault location method of multiple bearings in shafting based on SPWVD-CNN -- Investigate the damage of kinetic energy high-velocity bird impact on three different model spar by using the Coupled Eulerian-Lagrangian (CEL) approach -- Effects of Y2O3 on microstructure and wear resistance of laser cladding Ni-based coating on 42CrMoA alloy steel -- Effect of Nb/Sn and B combinatorial micro-alloying on the microstructure and corrosion properties of as-cast TiFe-based alloys -- Sputter Deposited Nanocomposite Cr-based Films and their Characterization -- Study on compressive properties of cylindrical graphene oxide cement-based composites -- Split Tensile Test of Brazilian Disc Specimen of Graphene Nanoplatelets Reinforced Cement-based Composite Materials -- Review on the preparation processes of natural fiber reinforced PLA composites -- Fabrication of Nickel/Nano-Lu2O3 co-electrodeposited coating with good corrosion and high temperature oxidation resistance -- Impact of Micromechanical and Carbon Fiber Properties on the Elastic Modulus of CFRP Woven Composites -- Microstructure and performance control of copper/stainless steel wire-feeding laser welding joint -- Research on Ultrasonic Welding of Ultra-thin Copper and Stainless Steel Dissimilar Metals with Nickel Foil as Intermediate Layer -- Numerical prediction of the permeability tensor components for 2D woven -- Wire rope mathematical model development -- Development of approaches to modeling the processes of joining sections and operation of drilling equipment -- Size effect study of tensile strength and elongation of copper foil -- Effect of solution heat treatment on microstructures and stress rupture properties of DZ406 alloy -- Design of Embedded Intelligent Online Monitoring System of OLTC Based on Vibration Analysis -- Effect of Hot Isostatic Pressing on Microstructure of 24CrNiMo Steel Produced by Selective Laser Melting -- Numerical simulation of melting flow in crude oil water based on Fluent -- Effects of Nickel on Microstructure and Properties of Direct Laser Deposited 00Cr25-xNiMo4 Duplex Stainless Steel. .

This book gathers the proceedings of the 4th International Conference on Mechanical Engineering and Applied Composite Materials (MEACM), held in Beijing, China on October 24-25, 2020. The conference brought together researchers from several countries and covered all major areas of mechanical engineering and applied composite materials, new applications and current trends. The topics covered include: structure and design, mechanical manufacturing and automation, robotics and mechatronics, mechanical behavior of nanomaterials, nanocomposites, and composite mechanics. Given its scope, the book offers a source of information and inspiration for researchers seeking to improve their work and gather new ideas for future developments.

ISBN: 9783030679583

Standard No.: 10.1007/978-3-030-67958-3doiSubjects--Topical Terms:

990113
Machinery.

LC Class. No.: TA213-215

Dewey Class. No.: 621.8

Proceedings of MEACM 2020 = Mechanical Engineering and Applied Composite Materials /
LDR:06220nam a22004095i 4500 001 1055028
003 DE-He213
005 20210921141459.0
007 cr nn 008mamaa
008 220103s2021 sz | s |||| 0|eng d
020 $a 9783030679583 $9 978-3-030-67958-3
024 7 $a 10.1007/978-3-030-67958-3 $2 doi
035 $a 978-3-030-67958-3
050 4 $a TA213-215
072 7 $a TGBN $2 bicssc
072 7 $a TEC046000 $2 bisacsh
072 7 $a TGBN $2 thema
082 0 4 $a 621.8 $2 23
245 1 0 $a Proceedings of MEACM 2020 $h [electronic resource] : $b Mechanical Engineering and Applied Composite Materials / $c edited by Lifang Zheng, Chaoyang Sun, Kheng-Lim Goh.
250 $a 1st ed. 2021.
264 1 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2021.
300 $a XI, 495 p. 304 illus., 221 illus. in color. $b online resource.
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
347 $a text file $b PDF $2 rda
490 1 $a Mechanisms and Machine Science, $x 2211-0992 ; $v 99
505 0 $a Effect of equal channel angular pressing on the microstructure and properties of pure Mg and the deformation mechanism -- Research on Ice-induced Vibration Test of Inland Icebreaker -- Critical Analysis of the Productivity of Well 2L after Foam Acid Diversion -- Investigation of spin pinned effect in Ni/NiFe/Ni trilayers via ferromagnetic resonance spectroscopy -- Residual stress evaluation of metallic component based on the synthetic nonlinear coefficient -- Molding process of automotive hemp fiber reinforced composites -- Trajectory control of mobile robot based on novel gesture detection -- Development of Personalized Wind Handling System using Infrared Ray Sensor -- Key Design Technologies of New Cable-Stayed and Steel Truss Composite Bridge -- The Role of Composite Materials to Rehabilitate Plant Piping -- Study on piezoelectric stack performance for linear ultrasonic motor -- Study on vibration and acoustic characteristics of ship stern structure by propeller excitations -- Nonlinear Wave Loads' Prediction on Ultra Large Containerships -- The Design of a Backpack System to Meet the Requirements of New Type of Individual Combat -- Study on Decarbonization of ZGMn13Cr2 during Heat Treatment -- Numerical Simulation of Aluminum Alloy Connecting Rod with Multi-Wedge Cross Wedge Rolling -- Effect of Water Temperature on Quenching Residual Stress of Aluminum Alloy Thick Plate -- Study on the Motion and Friction Mechanism of Flexible Roller in Space Roll ring -- Analysis on the Influence of Bearing Stiffness on Critical Speed of Rotor System of a New Scroll Compressor -- Experimental and Simulation Data-Driven Rolling Bearing Fault Size Quantitative Diagnosis in Big Data Era -- Research on assembly error transmission of small displacement spinor based on state space model -- Synthesis of Fluorescent Carbon dots from glucose and calcium carbonate and their application in the beverage -- Fault location method of multiple bearings in shafting based on SPWVD-CNN -- Investigate the damage of kinetic energy high-velocity bird impact on three different model spar by using the Coupled Eulerian-Lagrangian (CEL) approach -- Effects of Y2O3 on microstructure and wear resistance of laser cladding Ni-based coating on 42CrMoA alloy steel -- Effect of Nb/Sn and B combinatorial micro-alloying on the microstructure and corrosion properties of as-cast TiFe-based alloys -- Sputter Deposited Nanocomposite Cr-based Films and their Characterization -- Study on compressive properties of cylindrical graphene oxide cement-based composites -- Split Tensile Test of Brazilian Disc Specimen of Graphene Nanoplatelets Reinforced Cement-based Composite Materials -- Review on the preparation processes of natural fiber reinforced PLA composites -- Fabrication of Nickel/Nano-Lu2O3 co-electrodeposited coating with good corrosion and high temperature oxidation resistance -- Impact of Micromechanical and Carbon Fiber Properties on the Elastic Modulus of CFRP Woven Composites -- Microstructure and performance control of copper/stainless steel wire-feeding laser welding joint -- Research on Ultrasonic Welding of Ultra-thin Copper and Stainless Steel Dissimilar Metals with Nickel Foil as Intermediate Layer -- Numerical prediction of the permeability tensor components for 2D woven -- Wire rope mathematical model development -- Development of approaches to modeling the processes of joining sections and operation of drilling equipment -- Size effect study of tensile strength and elongation of copper foil -- Effect of solution heat treatment on microstructures and stress rupture properties of DZ406 alloy -- Design of Embedded Intelligent Online Monitoring System of OLTC Based on Vibration Analysis -- Effect of Hot Isostatic Pressing on Microstructure of 24CrNiMo Steel Produced by Selective Laser Melting -- Numerical simulation of melting flow in crude oil water based on Fluent -- Effects of Nickel on Microstructure and Properties of Direct Laser Deposited 00Cr25-xNiMo4 Duplex Stainless Steel. .
520 $a This book gathers the proceedings of the 4th International Conference on Mechanical Engineering and Applied Composite Materials (MEACM), held in Beijing, China on October 24-25, 2020. The conference brought together researchers from several countries and covered all major areas of mechanical engineering and applied composite materials, new applications and current trends. The topics covered include: structure and design, mechanical manufacturing and automation, robotics and mechatronics, mechanical behavior of nanomaterials, nanocomposites, and composite mechanics. Given its scope, the book offers a source of information and inspiration for researchers seeking to improve their work and gather new ideas for future developments.
650 0 $a Machinery. $3 990113
650 0 $a Structural materials. $3 1253576
650 0 $a Mechatronics. $3 559133
650 1 4 $a Machinery and Machine Elements. $3 670866
650 2 4 $a Structural Materials. $3 677176
700 1 $a Zheng, Lifang. $e editor. $4 edt $4 http://id.loc.gov/vocabulary/relators/edt $3 1360182
700 1 $a Sun, Chaoyang. $e editor. $4 edt $4 http://id.loc.gov/vocabulary/relators/edt $3 1360183
700 1 $a Goh, Kheng-Lim. $e editor. $4 edt $4 http://id.loc.gov/vocabulary/relators/edt $3 1360184
710 2 $a SpringerLink (Online service) $3 593884
773 0 $t Springer Nature eBook
776 0 8 $i Printed edition: $z 9783030679576
776 0 8 $i Printed edition: $z 9783030679590
776 0 8 $i Printed edition: $z 9783030679606
830 0 $a Mechanisms and Machine Science, $x 2211-0984 ; $v 30 $3 1253769
856 4 0 $u https://doi.org/10.1007/978-3-030-67958-3
912 $a ZDB-2-ENG
912 $a ZDB-2-SXE
950 $a Engineering (SpringerNature-11647)
950 $a Engineering (R0) (SpringerNature-43712)