國立虎尾科技大學 |

3d Printing of Stainless Steel 316L for Corrosive and Low-pressure Environments.

Record Type:	Language materials, printed : Monograph/item
Title/Author:	3d Printing of Stainless Steel 316L for Corrosive and Low-pressure Environments./
Author:	Sampath, Venkata Krishnan.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 2021,
Description:	44 p.
Notes:	Source: Masters Abstracts International, Volume: 82-11.
Contained By:	Masters Abstracts International82-11.
Subject:	Chemical engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28492894
ISBN:	9798738624766

3d Printing of Stainless Steel 316L for Corrosive and Low-pressure Environments.
Sampath, Venkata Krishnan.

3d Printing of Stainless Steel 316L for Corrosive and Low-pressure Environments. - Ann Arbor : ProQuest Dissertations & Theses, 2021 - 44 p.

Source: Masters Abstracts International, Volume: 82-11.

Thesis (M.S.)--Arizona State University, 2021.

This item must not be sold to any third party vendors.

Corrosion is one of the key failure modes for stainless steel (SS) piping assets handling water resources managed by utility companies. During downtime, the costs start to incur as the field engineer procures its replacement parts. The parts may or may not be in stock depending on how old, complex, and common the part model is. As a result, water utility companies and its resilience to operate amid part failure are a strong function of the supply chain for replacement piping.Metal additive manufacturing (AM) has been widely recognized for its ability to (a) deliver small production scales, (b) address complex part geometries, (c) offer large elemental metal and alloy selections, (d) provide superior material properties. The key motive is to harvest the short lead time of metal AM to explore its use for replacement parts for legacy piping assets in utility-scale water management facilities. In this paper, the goal was to demonstrate 3D printing of stainless steel (SS) 316L parts using selective laser melting (SLM) technology. The corrosion resistance of 3D printed SS 316L was investigated using (a) Chronoamperometry (b) Cyclic Potentiodynamic Polarization (CPP) and Electrochemical Impedance Spectroscopy (EIS) and its improved resistance from wrought (conventional) part was also studied. Then the weldability of 3D printed SS 316L to wrought SS 316L was illustrated and finally, the mechanical strength of the weld and the effect of corrosion on weld strength was investigated using uniaxial tensile testing.The results show that 3D printed part compared to the wrought part has a) lower mass loss before and after corrosion, (b) higher pitting potential, and (c) higher charge transfer resistance. The tensile testing of welded dog bone specimens indicates that the 3D printed parts despite being less ductile were observed to have higher weld strength compared to the wrought part. On this basis, metal AM holds great value to be explored further for replacement piping parts owing to their better corrosion resistance and mechanical performance.

ISBN: 9798738624766Subjects--Topical Terms:

555952
Chemical engineering.
Subjects--Index Terms:

Additive manufacturing

3d Printing of Stainless Steel 316L for Corrosive and Low-pressure Environments.
LDR:03231nam a2200385 4500 001 1067183
005 20220823142310.5
008 221020s2021 ||||||||||||||||| ||eng d
020 $a 9798738624766
035 $a (MiAaPQ)AAI28492894
035 $a AAI28492894
040 $a MiAaPQ $c MiAaPQ
100 1 $a Sampath, Venkata Krishnan. $3 1372569
245 1 0 $a 3d Printing of Stainless Steel 316L for Corrosive and Low-pressure Environments.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2021
300 $a 44 p.
500 $a Source: Masters Abstracts International, Volume: 82-11.
500 $a Advisor: Azeredo, Bruno.
502 $a Thesis (M.S.)--Arizona State University, 2021.
506 $a This item must not be sold to any third party vendors.
520 $a Corrosion is one of the key failure modes for stainless steel (SS) piping assets handling water resources managed by utility companies. During downtime, the costs start to incur as the field engineer procures its replacement parts. The parts may or may not be in stock depending on how old, complex, and common the part model is. As a result, water utility companies and its resilience to operate amid part failure are a strong function of the supply chain for replacement piping.Metal additive manufacturing (AM) has been widely recognized for its ability to (a) deliver small production scales, (b) address complex part geometries, (c) offer large elemental metal and alloy selections, (d) provide superior material properties. The key motive is to harvest the short lead time of metal AM to explore its use for replacement parts for legacy piping assets in utility-scale water management facilities. In this paper, the goal was to demonstrate 3D printing of stainless steel (SS) 316L parts using selective laser melting (SLM) technology. The corrosion resistance of 3D printed SS 316L was investigated using (a) Chronoamperometry (b) Cyclic Potentiodynamic Polarization (CPP) and Electrochemical Impedance Spectroscopy (EIS) and its improved resistance from wrought (conventional) part was also studied. Then the weldability of 3D printed SS 316L to wrought SS 316L was illustrated and finally, the mechanical strength of the weld and the effect of corrosion on weld strength was investigated using uniaxial tensile testing.The results show that 3D printed part compared to the wrought part has a) lower mass loss before and after corrosion, (b) higher pitting potential, and (c) higher charge transfer resistance. The tensile testing of welded dog bone specimens indicates that the 3D printed parts despite being less ductile were observed to have higher weld strength compared to the wrought part. On this basis, metal AM holds great value to be explored further for replacement piping parts owing to their better corrosion resistance and mechanical performance.
590 $a School code: 0010.
650 4 $a Chemical engineering. $3 555952
650 4 $a Engineering. $3 561152
650 4 $a Materials science. $3 557839
653 $a Additive manufacturing
653 $a Corrosion
653 $a Electrochemistry
653 $a Mechanical testing
653 $a Stainless steel
653 $a Welding
690 $a 0542
690 $a 0794
690 $a 0537
710 2 $a Arizona State University. $b Chemical Engineering. $3 1182447
773 0 $t Masters Abstracts International $g 82-11.
790 $a 0010
791 $a M.S.
792 $a 2021
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28492894