國立虎尾科技大學 |

Er:YAG Laser Interactions with Natural and Synthetic Varnishes for Paintings.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Er:YAG Laser Interactions with Natural and Synthetic Varnishes for Paintings./
作者:	Chille, Chiara.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2021,
面頁冊數:	515 p.
附註:	Source: Dissertations Abstracts International, Volume: 83-02, Section: B.
Contained By:	Dissertations Abstracts International83-02B.
標題:	Resins. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28538293
ISBN:	9798522939281

Er:YAG Laser Interactions with Natural and Synthetic Varnishes for Paintings.
Chille, Chiara.

Er:YAG Laser Interactions with Natural and Synthetic Varnishes for Paintings. - Ann Arbor : ProQuest Dissertations & Theses, 2021 - 515 p.

Source: Dissertations Abstracts International, Volume: 83-02, Section: B.

Thesis (Ph.D.)--University of Northumbria at Newcastle (United Kingdom), 2021.

This item must not be sold to any third party vendors.

This PhD study aims to deepen the comprehension of the Er:YAG (2940 nm) laser-induced physicochemical effects on aged varnishes by a systematic examination of the side effects caused by the temperature rise in the irradiated surfaces, the heat propagation in the bulk and examines if the laser beam could reach the underlying layer during the laser-material interaction. It also focused on whether Er:YAG lasers can be used to safely thin varnishes applied to works of art, therefore, enhancing the use of laser as an alternative to traditional cleaning methods for paintings. A series of dammar, Ketone N, MS2A, and Paraloid B67 varnish mockups on glass slides were light and hydrothermally aged for a comprehensive study. Artists and conservators commonly used these resins in paintings of the late nineteenth and twentieth centuries. Changes in temperature upon laser irradiation were determined by i) recording live thermal imaging with an IR thermal camera and ii) obtaining the optical properties of the varnishes to estimate the absorption coefficients and the temperature increases. A mathematical model and a two-dimensional simulation of the laser heat diffusion through each irradiated varnish supported the second approach. They also provided an additional possibility to study the heat propagation in the bulk of the irradiated varnishes. It was found that, in this case, the IR thermal camera was unable to provide accurate maximum peak temperature data. Nonetheless, the pre-wetted varnishes using an aqueous solution showed ΔTmean values higher than on the dry varnishes due to the superheating of the aqueous film on the surface (Nahen and Vogel, 2002). Transmission Infrared Spectroscopy and Differential Scanning Calorimetry determined the absorption coefficients and the specific heat capacities of films. The mathematical model and the 2D simulations showed that the maximum temperature was obtained using a short pulse duration (VSP) mode, and the heat distribution was less than the one obtained with a long pulse duration (SP) mode. The temperature at the interface between the coating films and the substrate remained at room temperature, thereby protecting the underlying paint surface. Transmission studies were carried out on the aged varnishes in real-time upon laser irradiation, showing that the energy transmitted upon a single laser pulse in VSP and SP modes increased almost linearly with fluence. By pre-wetting the varnishes’ surface with an aqueous solution, the laser energy propagation into the selected varnishes was reduced because of the maximum absorption coefficient of water at the Er:YAG laser wavelength (Shori et al., 2001). Since Paraloid B67 does not contain O-H groups in its chemical structure, the transmission infrared spectroscopy showed almost all the Er:YAG laser radiation passed through the film, reaching the underlying layer. Chemical changes were monitored with Attenuated Total Reflection/Fourier Transform Infra-Red Spectroscopy. This analysis registered a reduction of hydroxides and carbonyls relative to hydrocarbon bonds compared to the films before irradiation. The decrease in hydroxides confirmed that the dominating mechanism of Er:YAG laser is directly related to the maximum absorption of the 2940 nm laser wavelength from the hydroxides in the irradiated surface.

ISBN: 9798522939281Subjects--Topical Terms:

1372598
Resins.

Er:YAG Laser Interactions with Natural and Synthetic Varnishes for Paintings.
LDR:04508nam a2200373 4500 001 1067193
005 20220823142313.5
008 221020s2021 ||||||||||||||||| ||eng d
020 $a 9798522939281
035 $a (MiAaPQ)AAI28538293
035 $a (MiAaPQ)Northumbria_46051
035 $a AAI28538293
040 $a MiAaPQ $c MiAaPQ
100 1 $a Chille, Chiara. $3 1372596
245 1 0 $a Er:YAG Laser Interactions with Natural and Synthetic Varnishes for Paintings.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2021
300 $a 515 p.
500 $a Source: Dissertations Abstracts International, Volume: 83-02, Section: B.
500 $a Advisor: Theodorakopoulos, Charis.
502 $a Thesis (Ph.D.)--University of Northumbria at Newcastle (United Kingdom), 2021.
506 $a This item must not be sold to any third party vendors.
520 $a This PhD study aims to deepen the comprehension of the Er:YAG (2940 nm) laser-induced physicochemical effects on aged varnishes by a systematic examination of the side effects caused by the temperature rise in the irradiated surfaces, the heat propagation in the bulk and examines if the laser beam could reach the underlying layer during the laser-material interaction. It also focused on whether Er:YAG lasers can be used to safely thin varnishes applied to works of art, therefore, enhancing the use of laser as an alternative to traditional cleaning methods for paintings. A series of dammar, Ketone N, MS2A, and Paraloid B67 varnish mockups on glass slides were light and hydrothermally aged for a comprehensive study. Artists and conservators commonly used these resins in paintings of the late nineteenth and twentieth centuries. Changes in temperature upon laser irradiation were determined by i) recording live thermal imaging with an IR thermal camera and ii) obtaining the optical properties of the varnishes to estimate the absorption coefficients and the temperature increases. A mathematical model and a two-dimensional simulation of the laser heat diffusion through each irradiated varnish supported the second approach. They also provided an additional possibility to study the heat propagation in the bulk of the irradiated varnishes. It was found that, in this case, the IR thermal camera was unable to provide accurate maximum peak temperature data. Nonetheless, the pre-wetted varnishes using an aqueous solution showed ΔTmean values higher than on the dry varnishes due to the superheating of the aqueous film on the surface (Nahen and Vogel, 2002). Transmission Infrared Spectroscopy and Differential Scanning Calorimetry determined the absorption coefficients and the specific heat capacities of films. The mathematical model and the 2D simulations showed that the maximum temperature was obtained using a short pulse duration (VSP) mode, and the heat distribution was less than the one obtained with a long pulse duration (SP) mode. The temperature at the interface between the coating films and the substrate remained at room temperature, thereby protecting the underlying paint surface. Transmission studies were carried out on the aged varnishes in real-time upon laser irradiation, showing that the energy transmitted upon a single laser pulse in VSP and SP modes increased almost linearly with fluence. By pre-wetting the varnishes’ surface with an aqueous solution, the laser energy propagation into the selected varnishes was reduced because of the maximum absorption coefficient of water at the Er:YAG laser wavelength (Shori et al., 2001). Since Paraloid B67 does not contain O-H groups in its chemical structure, the transmission infrared spectroscopy showed almost all the Er:YAG laser radiation passed through the film, reaching the underlying layer. Chemical changes were monitored with Attenuated Total Reflection/Fourier Transform Infra-Red Spectroscopy. This analysis registered a reduction of hydroxides and carbonyls relative to hydrocarbon bonds compared to the films before irradiation. The decrease in hydroxides confirmed that the dominating mechanism of Er:YAG laser is directly related to the maximum absorption of the 2940 nm laser wavelength from the hydroxides in the irradiated surface.
590 $a School code: 5060.
650 4 $a Resins. $3 1372598
650 4 $a Spectrum analysis. $3 582358
650 4 $a Lasers. $3 557748
650 4 $a Solvents. $3 891167
650 4 $a Thermogravimetric analysis. $3 1372599
650 4 $a Protective coatings. $3 561717
650 4 $a Heat conductivity. $3 1372522
650 4 $a Contact angle. $3 1049700
650 4 $a Analytical chemistry. $3 1182118
650 4 $a Chemistry. $3 593913
650 4 $a Optics. $3 595336
650 4 $a Physics. $3 564049
650 4 $a Materials science. $3 557839
650 4 $a Energy. $3 784773
650 4 $a 19th century. $3 934375
650 4 $a Propagation. $3 1372600
650 4 $a Simulation. $3 998515
650 4 $a Cameras. $3 812890
650 4 $a Aging. $3 559847
650 4 $a Literature reviews. $3 1372466
650 4 $a Geometry. $3 579899
650 4 $a Cultural heritage. $3 1203579
650 4 $a Painting. $3 1131865
690 $a 0486
690 $a 0485
690 $a 0752
690 $a 0605
690 $a 0794
690 $a 0493
690 $a 0791
710 2 $a University of Northumbria at Newcastle (United Kingdom). $3 1372597
773 0 $t Dissertations Abstracts International $g 83-02B.
790 $a 5060
791 $a Ph.D.
792 $a 2021
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28538293