國立虎尾科技大學 |

Effects of in situ Surface Layer Heating on Laser Powder Bed Fusion of 316L Stainless Steel.

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Effects of in situ Surface Layer Heating on Laser Powder Bed Fusion of 316L Stainless Steel./
Author:	Smith, William Louis.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 2021,
Description:	79 p.
Notes:	Source: Masters Abstracts International, Volume: 83-05.
Contained By:	Masters Abstracts International83-05.
Subject:	Mechanical engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28719454
ISBN:	9798492789022

Effects of in situ Surface Layer Heating on Laser Powder Bed Fusion of 316L Stainless Steel.
Smith, William Louis.

Effects of in situ Surface Layer Heating on Laser Powder Bed Fusion of 316L Stainless Steel. - Ann Arbor : ProQuest Dissertations & Theses, 2021 - 79 p.

Source: Masters Abstracts International, Volume: 83-05.

Thesis (M.S.)--University of California, Davis, 2021.

This item must not be sold to any third party vendors.

Additively manufacturing metal parts through laser powder bed fusion (LPBF) is of growing interest to many welds, ranging from medical to aerospace. Typical LPBF systems use a single laser to weld the metal powder, which leads to sharp temperature gradients as metal rapidly melts and solidifies. However, due to the extreme heating and cooling cycles experienced during LPBF, the resulting parts are often plagued with internal residual stresses which can cause warping and a deviation from the original design specifications. This work explores an in situ method of mitigating residual stress by using a dual laser system where a secondary diode laser projects uniformly over a large area to heat the current top layer. With the ability to determine the timing, duration, intensity, and periodicity of the secondary laser projection, the user is allowed full control of the thermal history of their part throughout the build. This selective heating of the welded surface pattern reduces the temperature gradient between layers, thus reducing the residual stress. The capability to control grain growth in LPBF using the secondary surface-heating laser is also explored in this work. Such a system allows the user to control the solidication time, thus controlling the transition through various phases and ultimately the resulting microstructure. This secondary surface heating source provides an alternative to other heat treatment methods such as post annealing and build plate heating. Directly heating the topmost layer allows for temperature control within the region most affected by the welding.

ISBN: 9798492789022Subjects--Topical Terms:

557493
Mechanical engineering.
Subjects--Index Terms:

Additive manufacturing

Effects of in situ Surface Layer Heating on Laser Powder Bed Fusion of 316L Stainless Steel.
LDR:02782nam a2200373 4500 001 1067245
005 20220823142326.5
008 221020s2021 ||||||||||||||||| ||eng d
020 $a 9798492789022
035 $a (MiAaPQ)AAI28719454
035 $a AAI28719454
040 $a MiAaPQ $c MiAaPQ
100 1 $a Smith, William Louis. $3 1372725
245 1 0 $a Effects of in situ Surface Layer Heating on Laser Powder Bed Fusion of 316L Stainless Steel.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2021
300 $a 79 p.
500 $a Source: Masters Abstracts International, Volume: 83-05.
500 $a Advisor: Hill, Michael R.
502 $a Thesis (M.S.)--University of California, Davis, 2021.
506 $a This item must not be sold to any third party vendors.
520 $a Additively manufacturing metal parts through laser powder bed fusion (LPBF) is of growing interest to many welds, ranging from medical to aerospace. Typical LPBF systems use a single laser to weld the metal powder, which leads to sharp temperature gradients as metal rapidly melts and solidifies. However, due to the extreme heating and cooling cycles experienced during LPBF, the resulting parts are often plagued with internal residual stresses which can cause warping and a deviation from the original design specifications. This work explores an in situ method of mitigating residual stress by using a dual laser system where a secondary diode laser projects uniformly over a large area to heat the current top layer. With the ability to determine the timing, duration, intensity, and periodicity of the secondary laser projection, the user is allowed full control of the thermal history of their part throughout the build. This selective heating of the welded surface pattern reduces the temperature gradient between layers, thus reducing the residual stress. The capability to control grain growth in LPBF using the secondary surface-heating laser is also explored in this work. Such a system allows the user to control the solidication time, thus controlling the transition through various phases and ultimately the resulting microstructure. This secondary surface heating source provides an alternative to other heat treatment methods such as post annealing and build plate heating. Directly heating the topmost layer allows for temperature control within the region most affected by the welding.
590 $a School code: 0029.
650 4 $a Mechanical engineering. $3 557493
650 4 $a Materials science. $3 557839
653 $a Additive manufacturing
653 $a Annealing
653 $a Contour method
653 $a Laser powder bed fusion
653 $a Neutron diffraction
653 $a Residual stress
690 $a 0548
690 $a 0794
710 2 $a University of California, Davis. $b Mechanical and Aerospace Engineering. $3 1179018
773 0 $t Masters Abstracts International $g 83-05.
790 $a 0029
791 $a M.S.
792 $a 2021
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28719454