國立虎尾科技大學 |

Particle Grid Hybrid Methods for Multi-Material Dynamics.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Particle Grid Hybrid Methods for Multi-Material Dynamics./
作者:	Marquez Razon, Alan.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2021,
面頁冊數:	137 p.
附註:	Source: Dissertations Abstracts International, Volume: 83-06, Section: B.
Contained By:	Dissertations Abstracts International83-06B.
標題:	Aerospace engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28867712
ISBN:	9798759968566

Particle Grid Hybrid Methods for Multi-Material Dynamics.
Marquez Razon, Alan.

Particle Grid Hybrid Methods for Multi-Material Dynamics. - Ann Arbor : ProQuest Dissertations & Theses, 2021 - 137 p.

Source: Dissertations Abstracts International, Volume: 83-06, Section: B.

Thesis (Ph.D.)--University of California, Los Angeles, 2021.

This item must not be sold to any third party vendors.

The Material Point Method (MPM) has shown its capability in simulating multi-physics and multi-material dynamics. In this dissertation, we present an extension to the Material Point Method (MPM) for simulating volumetric collisions of elastic objects, formulate a novel approach for surface tension phenomenon, and a hybrid particle/grid approach for simulating incompressible fluids.First, we present a momentum-conserving hybrid particle/grid iteration method for volumetric elastic contact problems. We use a Lagrangian mesh to discretize the elastic material and an Eulerian grid to provide the collision response at the mesh boundary. The Eulerian grid utilizes Affine-Particle-In-Cell (APIC) transfers which conserve both linear and angular momentum when affine information is provided to the boundary nodes. The transfers are leveraged in terms of performance to capture the impulses needed to prevent a collision. The cohesion that occurs when separating in the APIC transfers is removed through augury iterations. A novel resampling scheme and modifications to the transfers that conserve mass, linear and angular momentum are used to capture the collision on finner Eulerian grids. This iteration can be used to provide faster convergence in impulse-based approaches that are commonly used in graphics. Second, we present an updated Lagrangian discretization of surface tension forces for the simulation of liquids with moderate to extreme surface tension effects. The potential energy associated with surface tension is proportional to the surface area of the liquid. We design discrete forces as gradients of this energy to the motion of the fluid over a time step. We show that this naturally allows for inversion of the Hessian of the potential energy required with the use of Newton's method to solve the systems of nonlinear equations associated with implicit time stepping. We design a novel level-set-based boundary quadrature technique to discretize the surface area calculation in our energy-based formulation. Our approach works most naturally with Particle-In-Cell techniques and we demonstrate our approach with a weakly incompressible model for liquid discretized with the Material Point Method. Lastly, we design a particle resampling approach needed to achieve perfect conservation of linear and angular momentum with APIC. We show that our approach is essential for allowing efficient implicit numerical integration in the limit of materials with variable high surface tension.Last, we present a hybrid particle/grid approach for simulating incompressible fluids on collocated velocity grids. We interchangeably use particle and grid representations of transported quantities to balance efficiency and accuracy. A novel Backward Semi-Lagrangian method is derived to improve the accuracy of grid-based advection. Our approach utilizes the implicit formula associated with solutions of Burgers' equation. We enforce incompressibility over collocated, rather than staggered grids. Our projection technique is variational and designed for B-spline interpolation over regular grids where multi quadratic interpolation is used for velocity and multilinear interpolation for pressure. Despite our use of regular grids, we extend the variational technique to allow for cut-cell definition of irregular flow domains for both Dirichlet and free surface boundary conditions.

ISBN: 9798759968566Subjects--Topical Terms:

686400
Aerospace engineering.
Subjects--Index Terms:

Collision

Particle Grid Hybrid Methods for Multi-Material Dynamics.
LDR:04633nam a2200397 4500 001 1067285
005 20220823142337.5
008 221020s2021 ||||||||||||||||| ||eng d
020 $a 9798759968566
035 $a (MiAaPQ)AAI28867712
035 $a AAI28867712
040 $a MiAaPQ $c MiAaPQ
100 1 $a Marquez Razon, Alan. $3 1372819
245 1 0 $a Particle Grid Hybrid Methods for Multi-Material Dynamics.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2021
300 $a 137 p.
500 $a Source: Dissertations Abstracts International, Volume: 83-06, Section: B.
500 $a Advisor: Eldredge, Jeffrey;Teran, Joseph M.
502 $a Thesis (Ph.D.)--University of California, Los Angeles, 2021.
506 $a This item must not be sold to any third party vendors.
520 $a The Material Point Method (MPM) has shown its capability in simulating multi-physics and multi-material dynamics. In this dissertation, we present an extension to the Material Point Method (MPM) for simulating volumetric collisions of elastic objects, formulate a novel approach for surface tension phenomenon, and a hybrid particle/grid approach for simulating incompressible fluids.First, we present a momentum-conserving hybrid particle/grid iteration method for volumetric elastic contact problems. We use a Lagrangian mesh to discretize the elastic material and an Eulerian grid to provide the collision response at the mesh boundary. The Eulerian grid utilizes Affine-Particle-In-Cell (APIC) transfers which conserve both linear and angular momentum when affine information is provided to the boundary nodes. The transfers are leveraged in terms of performance to capture the impulses needed to prevent a collision. The cohesion that occurs when separating in the APIC transfers is removed through augury iterations. A novel resampling scheme and modifications to the transfers that conserve mass, linear and angular momentum are used to capture the collision on finner Eulerian grids. This iteration can be used to provide faster convergence in impulse-based approaches that are commonly used in graphics. Second, we present an updated Lagrangian discretization of surface tension forces for the simulation of liquids with moderate to extreme surface tension effects. The potential energy associated with surface tension is proportional to the surface area of the liquid. We design discrete forces as gradients of this energy to the motion of the fluid over a time step. We show that this naturally allows for inversion of the Hessian of the potential energy required with the use of Newton's method to solve the systems of nonlinear equations associated with implicit time stepping. We design a novel level-set-based boundary quadrature technique to discretize the surface area calculation in our energy-based formulation. Our approach works most naturally with Particle-In-Cell techniques and we demonstrate our approach with a weakly incompressible model for liquid discretized with the Material Point Method. Lastly, we design a particle resampling approach needed to achieve perfect conservation of linear and angular momentum with APIC. We show that our approach is essential for allowing efficient implicit numerical integration in the limit of materials with variable high surface tension.Last, we present a hybrid particle/grid approach for simulating incompressible fluids on collocated velocity grids. We interchangeably use particle and grid representations of transported quantities to balance efficiency and accuracy. A novel Backward Semi-Lagrangian method is derived to improve the accuracy of grid-based advection. Our approach utilizes the implicit formula associated with solutions of Burgers' equation. We enforce incompressibility over collocated, rather than staggered grids. Our projection technique is variational and designed for B-spline interpolation over regular grids where multi quadratic interpolation is used for velocity and multilinear interpolation for pressure. Despite our use of regular grids, we extend the variational technique to allow for cut-cell definition of irregular flow domains for both Dirichlet and free surface boundary conditions.
590 $a School code: 0031.
650 4 $a Aerospace engineering. $3 686400
650 4 $a Mechanical engineering. $3 557493
650 4 $a Fluid mechanics. $3 555551
650 4 $a Computational physics. $3 1181955
653 $a Collision
653 $a Continuum dynamics
653 $a Incompressible fluid solver
653 $a Material point method
653 $a Numerical methods
653 $a Surrface tension
690 $a 0216
690 $a 0204
690 $a 0548
690 $a 0538
710 2 $a University of California, Los Angeles. $b Aerospace Engineering 0279. $3 1372820
773 0 $t Dissertations Abstracts International $g 83-06B.
790 $a 0031
791 $a Ph.D.
792 $a 2021
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28867712