國立虎尾科技大學 |

Single- and Two-Phase Flow Pressure Drop and Heat Transfer in Tubes

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Single- and Two-Phase Flow Pressure Drop and Heat Transfer in Tubes/ by Afshin J. Ghajar.
作者:	Ghajar, Afshin J.
面頁冊數:	XXIV, 280 p. 131 illus., 54 illus. in color.online resource. :
Contained By:	Springer Nature eBook
標題:	Engineering Fluid Dynamics. -
電子資源:	https://doi.org/10.1007/978-3-030-87281-6
ISBN:	9783030872816

Single- and Two-Phase Flow Pressure Drop and Heat Transfer in Tubes
Ghajar, Afshin J.

Single- and Two-Phase Flow Pressure Drop and Heat Transfer in Tubes[electronic resource] /by Afshin J. Ghajar. - 1st ed. 2022. - XXIV, 280 p. 131 illus., 54 illus. in color.online resource. - Mechanical Engineering Series,2192-063X. - Mechanical Engineering Series,.

Introduction -- Single-Phase Flow Experimental Setup -- Friction Factor Results in Plain Tube -- Proposed Correlations for Friction Factor in Plain Tube -- Heat Transfer Results in Plain Tube -- Proposed Correlations for Heat Transfer in Plain Tube -- Simultaneous Heat Transfer and Friction Factor Analysis -- Friction Factor Results in Micro-fin Tubes -- Proposed Correlations for Friction Factor in Micro-fin Tubes -- Heat Transfer Results in Micro-fin Tubes -- Proposed Correlations for Heat Transfer in Micro-fin Tubes.

Part I of this book provides design engineers an elemental understanding of the variables that influence pressure drop and heat transfer in plain and micro-fin tubes to thermal systems using liquid single-phase flow in different industrial applications. The author and his colleagues were the first to determine experimentally the very important relationship between inlet geometry and transition. On the basis of their results, they developed practical and easy to use correlations for the isothermal and non-isothermal friction factor (pressure drop) and heat transfer coefficient (Nusselt number) in the transition region as well as the laminar and turbulent flow regions for different inlet configurations and fin geometry. The work presented in Part I of the book provides the thermal systems design engineer the necessary design tools. Part II of this book provides design engineers using gas-liquid two-phase flow in different industrial applications the necessary fundamental understanding of the two-phase flow variables. Two-phase flow literature reports a plethora of correlations for determination of flow patterns, void fraction, two- phase pressure drop and non-boiling heat transfer correlations. However, the validity of a majority of these correlations is restricted over a narrow range of two-phase flow conditions. Consequently, it is quite a challenging task for the end user to select an appropriate correlation/model for the type of two-phase flow under consideration. Selection of a correct correlation also requires some fundamental understanding of the two-phase flow physics and the underlying principles/assumptions/limitations associated with these correlations. Thus, it is of significant interest for a design engineer to have knowledge of the flow patterns and their transitions and their influence on two-phase flow variables. To address some of these issues and facilitate selection of appropriate two-phase flow models, Part II of this book presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommend some of the well scrutinized modeling techniques. Reviews pressure drop, heat transfer coefficient, and inlet configuration effect in the transition region Includes void fraction correlations for flow patterns, pipe orientations, models for pressure drop calculations Presents non-boiling two-phase flow heat transfer correlations for different flow patterns and pipe orientations.

ISBN: 9783030872816

Standard No.: 10.1007/978-3-030-87281-6doiSubjects--Topical Terms:

670525
Engineering Fluid Dynamics.

LC Class. No.: TJ265

Dewey Class. No.: 621.4021

Single- and Two-Phase Flow Pressure Drop and Heat Transfer in Tubes
LDR:04446nam a22004215i 4500 001 1092470
003 DE-He213
005 20220111163914.0
007 cr nn 008mamaa
008 221228s2022 sz | s |||| 0|eng d
020 $a 9783030872816 $9 978-3-030-87281-6
024 7 $a 10.1007/978-3-030-87281-6 $2 doi
035 $a 978-3-030-87281-6
050 4 $a TJ265
050 4 $a TP156.M3
072 7 $a TGMB $2 bicssc
072 7 $a SCI065000 $2 bisacsh
072 7 $a TGMB $2 thema
082 0 4 $a 621.4021 $2 23
100 1 $a Ghajar, Afshin J. $e author. $4 aut $4 http://id.loc.gov/vocabulary/relators/aut $3 1318439
245 1 0 $a Single- and Two-Phase Flow Pressure Drop and Heat Transfer in Tubes $h [electronic resource] / $c by Afshin J. Ghajar.
250 $a 1st ed. 2022.
264 1 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2022.
300 $a XXIV, 280 p. 131 illus., 54 illus. in color. $b online resource.
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
347 $a text file $b PDF $2 rda
490 1 $a Mechanical Engineering Series, $x 2192-063X
505 0 $a Introduction -- Single-Phase Flow Experimental Setup -- Friction Factor Results in Plain Tube -- Proposed Correlations for Friction Factor in Plain Tube -- Heat Transfer Results in Plain Tube -- Proposed Correlations for Heat Transfer in Plain Tube -- Simultaneous Heat Transfer and Friction Factor Analysis -- Friction Factor Results in Micro-fin Tubes -- Proposed Correlations for Friction Factor in Micro-fin Tubes -- Heat Transfer Results in Micro-fin Tubes -- Proposed Correlations for Heat Transfer in Micro-fin Tubes.
520 $a Part I of this book provides design engineers an elemental understanding of the variables that influence pressure drop and heat transfer in plain and micro-fin tubes to thermal systems using liquid single-phase flow in different industrial applications. The author and his colleagues were the first to determine experimentally the very important relationship between inlet geometry and transition. On the basis of their results, they developed practical and easy to use correlations for the isothermal and non-isothermal friction factor (pressure drop) and heat transfer coefficient (Nusselt number) in the transition region as well as the laminar and turbulent flow regions for different inlet configurations and fin geometry. The work presented in Part I of the book provides the thermal systems design engineer the necessary design tools. Part II of this book provides design engineers using gas-liquid two-phase flow in different industrial applications the necessary fundamental understanding of the two-phase flow variables. Two-phase flow literature reports a plethora of correlations for determination of flow patterns, void fraction, two- phase pressure drop and non-boiling heat transfer correlations. However, the validity of a majority of these correlations is restricted over a narrow range of two-phase flow conditions. Consequently, it is quite a challenging task for the end user to select an appropriate correlation/model for the type of two-phase flow under consideration. Selection of a correct correlation also requires some fundamental understanding of the two-phase flow physics and the underlying principles/assumptions/limitations associated with these correlations. Thus, it is of significant interest for a design engineer to have knowledge of the flow patterns and their transitions and their influence on two-phase flow variables. To address some of these issues and facilitate selection of appropriate two-phase flow models, Part II of this book presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommend some of the well scrutinized modeling techniques. Reviews pressure drop, heat transfer coefficient, and inlet configuration effect in the transition region Includes void fraction correlations for flow patterns, pipe orientations, models for pressure drop calculations Presents non-boiling two-phase flow heat transfer correlations for different flow patterns and pipe orientations.
650 2 4 $a Engineering Fluid Dynamics. $3 670525
650 1 4 $a Engineering Thermodynamics, Heat and Mass Transfer. $3 769147
650 0 $a Fluid mechanics. $3 555551
650 0 $a Microfluidics. $3 568611
650 0 $a Mass transfer. $3 556853
650 0 $a Heat transfer. $3 1085480
650 0 $a Heat engineering. $3 681953
650 0 $a Thermodynamics. $3 596513
710 2 $a SpringerLink (Online service) $3 593884
773 0 $t Springer Nature eBook
776 0 8 $i Printed edition: $z 9783030872809
776 0 8 $i Printed edition: $z 9783030872823
776 0 8 $i Printed edition: $z 9783030872830
830 0 $a Mechanical Engineering Series, $x 0941-5122 $3 1265140
856 4 0 $u https://doi.org/10.1007/978-3-030-87281-6
912 $a ZDB-2-ENG
912 $a ZDB-2-SXE
950 $a Engineering (SpringerNature-11647)
950 $a Engineering (R0) (SpringerNature-43712)