國立虎尾科技大學 |

Millimetre-Wave Components Based on Groove Gap Waveguide Technology: Design and Development.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Millimetre-Wave Components Based on Groove Gap Waveguide Technology: Design and Development./
作者:	Al-Juboori, Bahaa Jasim Mousa.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2022,
面頁冊數:	159 p.
附註:	Source: Dissertations Abstracts International, Volume: 84-01, Section: B.
Contained By:	Dissertations Abstracts International84-01B.
標題:	Polymer chemistry. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=29191715
ISBN:	9798835547906

Millimetre-Wave Components Based on Groove Gap Waveguide Technology: Design and Development.
Al-Juboori, Bahaa Jasim Mousa.

Millimetre-Wave Components Based on Groove Gap Waveguide Technology: Design and Development. - Ann Arbor : ProQuest Dissertations & Theses, 2022 - 159 p.

Source: Dissertations Abstracts International, Volume: 84-01, Section: B.

Thesis (Ph.D.)--The University of Liverpool (United Kingdom), 2022.

This item must not be sold to any third party vendors.

Millimetre-wave (mmWave) passive devices have been a pivotal research topic for the last decades. Low loss, low mass and ease of manufacture for passive components operating at mmWave frequency bands and beyond are of high importance for aerospace and satellite applications. A vast number of mmWave components using various design technologies have been reported. For high-frequency applications, designers prefer conventional waveguides due to their low loss and high powerhandling capabilities. However, the poor contact between the joined waveguide parts is one of the drawbacks. Gap waveguide technology has been introduced as a promising and an alternative solution to the conventional waveguides, at mmWave frequency bands and beyond. A gap waveguide consists of two parallel plates, one acts as a perfect electrical conducting, while the other has a periodic structure of metal pins to act as an artificial magnetic conductor.The work of this thesis can be divided into three major parts: (i) A comprehensive review of the design technologies of mmWave passive devices is accomplished, exhibiting the advantages and features of using the metamaterial-based gap waveguide technology. (ii) A mmWave bandpass filter is designed and fabricated using two different manufacturing technologies (computer numerical control machining and high-resolution metalised polymer jetting 3D printing) showing the difference between the two fabricated counterparts in terms of performance and mass. The metalised 3D printed BPF exhibits lower mass and better performance. Such low mass and low loss for BPFs are of high importance for aerospace applications. (iii) A novel periodic pinform of gap waveguide structures is proposed to overcome the limitations of the traditional forms of pins. Instead of only full-height pins in a conventional gap waveguide, a combination of wall and pins constitutes the new pin-form.Four advantages can be achieved by using the proposed pin-form. First, the wave shielding will be much more effective at the operating band compared to the traditional full-height pins. Second, the bandwidth of the passband can be enhanced by moving the upper edge of the passband towards higher frequencies due to the use of shorter pins instead of full-height pins, with the same width and height of the groove. Third, a good matching between a groove gap waveguide structure and a standard waveguide port can be achieved without the need for a transition. The fourth advantage is the solid wall can be exploited to make a horizontal slot to be used for wave radiation. This is the first time that the sidewalls of gap waveguides can be used for slot radiation. Based on the proposed structure, two components, a cavity-backed slot antenna and a cavity-backed slot filtering antenna, are designed and experimentally tested to yield excellent results with the simulations.

ISBN: 9798835547906Subjects--Topical Terms:

1182163
Polymer chemistry.

Millimetre-Wave Components Based on Groove Gap Waveguide Technology: Design and Development.
LDR:04120nam a2200409 4500 001 1104615
005 20230619080102.5
006 m o d
007 cr#unu||||||||
008 230907s2022 ||||||||||||||||| ||eng d
020 $a 9798835547906
035 $a (MiAaPQ)AAI29191715
035 $a (MiAaPQ)Liverpool_3151070
035 $a AAI29191715
040 $a MiAaPQ $c MiAaPQ
100 1 $a Al-Juboori, Bahaa Jasim Mousa. $3 1413504
245 1 0 $a Millimetre-Wave Components Based on Groove Gap Waveguide Technology: Design and Development.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2022
300 $a 159 p.
500 $a Source: Dissertations Abstracts International, Volume: 84-01, Section: B.
500 $a Advisor: Zhou, Jiafeng.
502 $a Thesis (Ph.D.)--The University of Liverpool (United Kingdom), 2022.
506 $a This item must not be sold to any third party vendors.
520 $a Millimetre-wave (mmWave) passive devices have been a pivotal research topic for the last decades. Low loss, low mass and ease of manufacture for passive components operating at mmWave frequency bands and beyond are of high importance for aerospace and satellite applications. A vast number of mmWave components using various design technologies have been reported. For high-frequency applications, designers prefer conventional waveguides due to their low loss and high powerhandling capabilities. However, the poor contact between the joined waveguide parts is one of the drawbacks. Gap waveguide technology has been introduced as a promising and an alternative solution to the conventional waveguides, at mmWave frequency bands and beyond. A gap waveguide consists of two parallel plates, one acts as a perfect electrical conducting, while the other has a periodic structure of metal pins to act as an artificial magnetic conductor.The work of this thesis can be divided into three major parts: (i) A comprehensive review of the design technologies of mmWave passive devices is accomplished, exhibiting the advantages and features of using the metamaterial-based gap waveguide technology. (ii) A mmWave bandpass filter is designed and fabricated using two different manufacturing technologies (computer numerical control machining and high-resolution metalised polymer jetting 3D printing) showing the difference between the two fabricated counterparts in terms of performance and mass. The metalised 3D printed BPF exhibits lower mass and better performance. Such low mass and low loss for BPFs are of high importance for aerospace applications. (iii) A novel periodic pinform of gap waveguide structures is proposed to overcome the limitations of the traditional forms of pins. Instead of only full-height pins in a conventional gap waveguide, a combination of wall and pins constitutes the new pin-form.Four advantages can be achieved by using the proposed pin-form. First, the wave shielding will be much more effective at the operating band compared to the traditional full-height pins. Second, the bandwidth of the passband can be enhanced by moving the upper edge of the passband towards higher frequencies due to the use of shorter pins instead of full-height pins, with the same width and height of the groove. Third, a good matching between a groove gap waveguide structure and a standard waveguide port can be achieved without the need for a transition. The fourth advantage is the solid wall can be exploited to make a horizontal slot to be used for wave radiation. This is the first time that the sidewalls of gap waveguides can be used for slot radiation. Based on the proposed structure, two components, a cavity-backed slot antenna and a cavity-backed slot filtering antenna, are designed and experimentally tested to yield excellent results with the simulations.
590 $a School code: 0722.
650 4 $a Polymer chemistry. $3 1182163
650 4 $a Physics. $3 564049
650 4 $a Industrial engineering. $3 679492
650 4 $a Engineering. $3 561152
650 4 $a Electromagnetics. $3 1178899
650 4 $a Electrical engineering. $3 596380
650 4 $a Aerospace engineering. $3 686400
650 4 $a Technology. $3 574163
650 4 $a Radiation. $3 673044
650 4 $a Spectrum allocation. $3 1372737
650 4 $a Design. $3 595500
650 4 $a Computer simulation. $3 560190
650 4 $a Antennas. $3 1071085
650 4 $a Bandwidths. $3 1372735
650 4 $a Satellite communications. $3 1413505
650 4 $a Manufacturing. $3 1295128
650 4 $a Integrated circuits. $3 561474
650 4 $a Polymers. $3 561233
650 4 $a Propagation. $3 1372600
690 $a 0389
690 $a 0538
690 $a 0544
690 $a 0607
690 $a 0537
690 $a 0546
690 $a 0605
690 $a 0495
710 2 $a The University of Liverpool (United Kingdom). $3 1335391
773 0 $t Dissertations Abstracts International $g 84-01B.
790 $a 0722
791 $a Ph.D.
792 $a 2022
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=29191715