國立虎尾科技大學 |

A Study of Some Parameters Which Influence the Static and Dynamic Stiffness of Joints in Machine Tool Structures.

Record Type:	Language materials, printed : Monograph/item
Title/Author:	A Study of Some Parameters Which Influence the Static and Dynamic Stiffness of Joints in Machine Tool Structures./
Author:	Thornley, R H.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 1969,
Description:	300 p.
Notes:	Source: Dissertations Abstracts International, Volume: 77-09, Section: B.
Contained By:	Dissertations Abstracts International77-09B.
Subject:	Mechanical engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10071676
ISBN:	9798379406226

A Study of Some Parameters Which Influence the Static and Dynamic Stiffness of Joints in Machine Tool Structures.
Thornley, R H.

A Study of Some Parameters Which Influence the Static and Dynamic Stiffness of Joints in Machine Tool Structures. - Ann Arbor : ProQuest Dissertations & Theses, 1969 - 300 p.

Source: Dissertations Abstracts International, Volume: 77-09, Section: B.

Thesis (Ph.D.)--The University of Manchester (United Kingdom), 1969.

This item must not be sold to any third party vendors.

This report deals with part of a research pro-grannie in which the behaviour of joints in machine tool structures is analysed and practically tested.The investigation is in two sections(i) The study of the static and dynamic stiffness of joints subjected to a loading in the plane normal to the joint surface.(ii) Investigations into the stiffness of flange and column connections.In part (i) tests were conducted on specimens of various apparent areas of contact in order to verify the relationshipLog P = m λj. + cA test rig is described which was designed to study the stiffness and damping capacity of joints subjected to static and dynamic forces acting in a direction normal to the interface surface.Joint specimens in both cast iron and mild steel were manufactured and tested and compared with equivalent solid specimens in each material.Three forms of surface finish for each material were investigated, i.e. shaped, peripheral ground and scraped. For each surface condition dry and lubricated surfaces were tested at various static preloads, with a dynamic force at different frequencies superimposed upon then.The effect of viscosity of the lubricant was shown to have a marked effect both upon stiffness and damping. Similar to the static test it could he con- eluded that the preload is the main parameter and that the stiffness is very much dependent upon it. The higher the preload the higher the stiffness, but increase in stiffness is accompanied by a decrease in damping capacity.Bonding of the joint faces was also shown to have certain advantages both upon stiffness and damping.In part (ii) investigations were carried out into the effect of flange design and bolt pocket constructions upon the stiffness and deformations of flange connections subjected to tensile and bending forces, bolt preload being found to be the important parameter considered.Column fixations and effect of bolt configurations were studied with the aid of a reduced scale column model fabricated in mild steel. Again, bolt preload and stiffness as well as the change in position of the pivot line were studied.The results of the experiments showed(a) that the stiffness of a column or flange connection may be greatly influenced by the design of the flange and the bolt configuration;(b) that the initial preload in a bolt and hence initial preloading pressure on a joint face has a direct bearing' on the joint.

ISBN: 9798379406226Subjects--Topical Terms:

557493
Mechanical engineering.
Subjects--Index Terms:

Column fixations

A Study of Some Parameters Which Influence the Static and Dynamic Stiffness of Joints in Machine Tool Structures.
LDR:03517nam a2200325 4500 001 1121812
005 20240624103639.5
006 m o d
007 cr#unu||||||||
008 240823s1969 ||||||||||||||||| ||eng d
020 $a 9798379406226
035 $a (MiAaPQ)AAI10071676
035 $a (MiAaPQ)DIS001543_00016259
035 $a AAI10071676
040 $a MiAaPQ $c MiAaPQ
100 1 $a Thornley, R H. $3 1437594
245 1 2 $a A Study of Some Parameters Which Influence the Static and Dynamic Stiffness of Joints in Machine Tool Structures.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 1969
300 $a 300 p.
500 $a Source: Dissertations Abstracts International, Volume: 77-09, Section: B.
502 $a Thesis (Ph.D.)--The University of Manchester (United Kingdom), 1969.
506 $a This item must not be sold to any third party vendors.
520 $a This report deals with part of a research pro-grannie in which the behaviour of joints in machine tool structures is analysed and practically tested.The investigation is in two sections(i) The study of the static and dynamic stiffness of joints subjected to a loading in the plane normal to the joint surface.(ii) Investigations into the stiffness of flange and column connections.In part (i) tests were conducted on specimens of various apparent areas of contact in order to verify the relationshipLog P = m λj. + cA test rig is described which was designed to study the stiffness and damping capacity of joints subjected to static and dynamic forces acting in a direction normal to the interface surface.Joint specimens in both cast iron and mild steel were manufactured and tested and compared with equivalent solid specimens in each material.Three forms of surface finish for each material were investigated, i.e. shaped, peripheral ground and scraped. For each surface condition dry and lubricated surfaces were tested at various static preloads, with a dynamic force at different frequencies superimposed upon then.The effect of viscosity of the lubricant was shown to have a marked effect both upon stiffness and damping. Similar to the static test it could he con- eluded that the preload is the main parameter and that the stiffness is very much dependent upon it. The higher the preload the higher the stiffness, but increase in stiffness is accompanied by a decrease in damping capacity.Bonding of the joint faces was also shown to have certain advantages both upon stiffness and damping.In part (ii) investigations were carried out into the effect of flange design and bolt pocket constructions upon the stiffness and deformations of flange connections subjected to tensile and bending forces, bolt preload being found to be the important parameter considered.Column fixations and effect of bolt configurations were studied with the aid of a reduced scale column model fabricated in mild steel. Again, bolt preload and stiffness as well as the change in position of the pivot line were studied.The results of the experiments showed(a) that the stiffness of a column or flange connection may be greatly influenced by the design of the flange and the bolt configuration;(b) that the initial preload in a bolt and hence initial preloading pressure on a joint face has a direct bearing' on the joint.
590 $a School code: 1543.
650 4 $a Mechanical engineering. $3 557493
653 $a Column fixations
690 $a 0548
710 2 $a The University of Manchester (United Kingdom). $3 1213791
773 0 $t Dissertations Abstracts International $g 77-09B.
790 $a 1543
791 $a Ph.D.
792 $a 1969
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10071676