國立虎尾科技大學 |

Investigation of CoO ATO for Solar Cells and Infrared Sheaths.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Investigation of CoO ATO for Solar Cells and Infrared Sheaths./
作者:	Devisetty Subramanyam, Manopriya.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2021,
面頁冊數:	80 p.
附註:	Source: Dissertations Abstracts International, Volume: 82-11, Section: B.
Contained By:	Dissertations Abstracts International82-11B.
標題:	Engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28415102
ISBN:	9798728269380

Investigation of CoO ATO for Solar Cells and Infrared Sheaths.
Devisetty Subramanyam, Manopriya.

Investigation of CoO ATO for Solar Cells and Infrared Sheaths. - Ann Arbor : ProQuest Dissertations & Theses, 2021 - 80 p.

Source: Dissertations Abstracts International, Volume: 82-11, Section: B.

Thesis (Ph.D.)--University of South Florida, 2021.

This item is not available from ProQuest Dissertations & Theses.

Solar as an energy source is expected to grow fastest from now to 2050. Increasing the efficiency is usually achieved by increasing the short circuit current density (JSC) and/or the fill factor. Improving the efficiency of solar cells will be an ongoing effort.Structurally solar technologies can be classified into two types, wafer-based and thin-film-based. Wafer solar cells have been used in this study. The anti-reflective layer on top of solar cells has been fabricated by a process called electrospinning to tune the solar cells' top surface with the desired thickness and dimensions of the nanofibers. The nanofibers' dimensions, shape, and alignment are tuned by changing the precursor solution's concentration, changing the fabrication parameters such as the 1. Voltage between needle tip and collector plate 2. Distance between needle tip and collector plate and 3. The flow rate of solution in the syringe pump.Physical or structural properties have been studied by using Scanning Electron Microscopy (SEM), Electron Dispersive Microscopy (EDS), Atomic Force Microscopy (AFM). Electrical characterization was carried out using a short circuit current- Voltage (J-V) and multimeter measurements.

ISBN: 9798728269380Subjects--Topical Terms:

561152
Engineering.
Subjects--Index Terms:

Electrospinning

Investigation of CoO ATO for Solar Cells and Infrared Sheaths.
LDR:02482nam a2200409 4500 001 1121844
005 20240624103649.5
006 m o d
007 cr#unu||||||||
008 240823s2021 ||||||||||||||||| ||eng d
020 $a 9798728269380
035 $a (MiAaPQ)AAI28415102
035 $a AAI28415102
040 $a MiAaPQ $c MiAaPQ
100 1 $a Devisetty Subramanyam, Manopriya. $3 1437644
245 1 0 $a Investigation of CoO ATO for Solar Cells and Infrared Sheaths.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2021
300 $a 80 p.
500 $a Source: Dissertations Abstracts International, Volume: 82-11, Section: B.
500 $a Advisor: Thomas, Sylvia W.
502 $a Thesis (Ph.D.)--University of South Florida, 2021.
506 $a This item is not available from ProQuest Dissertations & Theses.
506 $a This item must not be sold to any third party vendors.
520 $a Solar as an energy source is expected to grow fastest from now to 2050. Increasing the efficiency is usually achieved by increasing the short circuit current density (JSC) and/or the fill factor. Improving the efficiency of solar cells will be an ongoing effort.Structurally solar technologies can be classified into two types, wafer-based and thin-film-based. Wafer solar cells have been used in this study. The anti-reflective layer on top of solar cells has been fabricated by a process called electrospinning to tune the solar cells' top surface with the desired thickness and dimensions of the nanofibers. The nanofibers' dimensions, shape, and alignment are tuned by changing the precursor solution's concentration, changing the fabrication parameters such as the 1. Voltage between needle tip and collector plate 2. Distance between needle tip and collector plate and 3. The flow rate of solution in the syringe pump.Physical or structural properties have been studied by using Scanning Electron Microscopy (SEM), Electron Dispersive Microscopy (EDS), Atomic Force Microscopy (AFM). Electrical characterization was carried out using a short circuit current- Voltage (J-V) and multimeter measurements.
590 $a School code: 0206.
650 4 $a Engineering. $3 561152
650 4 $a Electrical engineering. $3 596380
650 4 $a Nanotechnology. $3 557660
653 $a Electrospinning
653 $a Infrared shield
653 $a Metal oxides
653 $a Nanofibers
653 $a Solar cell
690 $a 0537
690 $a 0544
690 $a 0652
710 2 $a University of South Florida. $b Electrical Engineering. $3 845643
773 0 $t Dissertations Abstracts International $g 82-11B.
790 $a 0206
791 $a Ph.D.
792 $a 2021
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28415102