國立虎尾科技大學 |

Processing and fabrication of advanced materials. = proceedings of the 29th International Conference on Processing and Fabrication of Advanced Materials (29th PFAM) September 6-8, 2023 /. Volume 3

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Processing and fabrication of advanced materials./ edited by Ajay Kumar ... [et al.].
其他題名:	proceedings of the 29th International Conference on Processing and Fabrication of Advanced Materials (29th PFAM) September 6-8, 2023 /
其他題名:	29th PFAM
其他作者:	Kumar, Ajay.
團體作者:	Workshop on the Preservation of Stability under Discretization
出版者:	Singapore :Springer Nature Singapore : : 2024.,
面頁冊數:	xxiv, 509 p. :ill., digital ; : 24 cm.;
Contained By:	Springer Nature eBook
標題:	Biomaterials. -
電子資源:	https://doi.org/10.1007/978-981-97-5967-5
ISBN:	9789819759675

Processing and fabrication of advanced materials. = proceedings of the 29th International Conference on Processing and Fabrication of Advanced Materials (29th PFAM) September 6-8, 2023 /. Volume 3
Processing and fabrication of advanced materials.proceedings of the 29th International Conference on Processing and Fabrication of Advanced Materials (29th PFAM) September 6-8, 2023 /Volume 3[electronic resource] :29th PFAMedited by Ajay Kumar ... [et al.]. - Singapore :Springer Nature Singapore :2024. - xxiv, 509 p. :ill., digital ;24 cm. - Springer proceedings in materials,v. 542662-317X ;. - Springer proceedings in materials ;v. 23..

Magnetorheological Characterization Assessment of Composite Magnetic Abrasive Towards Surface Finishing -- Laser-Assisted Machining of Nickel-Based Super Alloys and Optimization of Cutting Force Using ANN -- Study Gas Film Formation Through the Current Signal in Electrochemical- Discharge-Machining (ECDM) With and Without a Magnetic Field -- Excimer Laser Micro-Texturing on Silicon Wafer Using Mask Projection Technique -- Impact of Chloroform Treatment on the Tensile Property of PETG and PLA Materials Fabricated via the Fused Deposition Modeling (FDM) Technique -- SLA-Printed Porous Acoustic Meta-Material -- Plasma Electrolytic Polishing Process: Mechanism and Characteristics -- Micro Channel Fabrication by Additive and Subtractive Methods -- Study on Rheological Behavior of Alumina Ceramic Slurry for Direct Ink Writing Process -- Experimental Investigation on MRR in Wire-EDM Machining S31803 Profile Surface With Different Currents -- Development of Polymer Composites Containing HDPE and ABS With Varied Levels of PTFE for Tribological Applications -- Effect of Deposition Rate and Deposition Speed During the Fabrication of Iron Aluminides With 10 Wt. % of Al Using CMT-TWAAM Process -- Compressive Mechanical Behaviour of Closed-Cell Hybrid Metallic Foam Under Quasi-Static Loading -- Influence of Texture Patterns and Cryogenic Coolant During Machining of Precipitation-Hardened SS -- Fabrication and Characterization of Polymer Composites With the Help of an Enhanced Vacuum Moulding Technique.

This book presents select proceedings of the International Conference on Processing and Fabrication of Advanced Materials (PFAM 2023) It covers the latest research in the areas of processing, fabrication, characterization and evaluation of traditional, advanced and emerging materials. The topics covered include various properties and performance attributes of modern-age materials. It further covers their applications in areas such as aerospace and other space-related industries, automobile, marine and defense, biomedical and healthcare, electronics and communications, energy storage/harvesting, heavy equipment, machinery and goods and semiconductor materials manufacturing. The book is a valuable reference for researchers and professionals interested in processing and fabrication of advanced materials and allied fields.

ISBN: 9789819759675

Standard No.: 10.1007/978-981-97-5967-5doiSubjects--Topical Terms:

677000
Biomaterials.

LC Class. No.: TA401.3

Dewey Class. No.: 620.11

Processing and fabrication of advanced materials. = proceedings of the 29th International Conference on Processing and Fabrication of Advanced Materials (29th PFAM) September 6-8, 2023 /. Volume 3
LDR:03579nam a2200349 a 4500 001 1138166
003 DE-He213
005 20241022125724.0
006 m d
007 cr nn 008maaau
008 250117s2024 si s 0 eng d
020 $a 9789819759675 $q (electronic bk.)
020 $a 9789819759668 $q (paper)
024 7 $a 10.1007/978-981-97-5967-5 $2 doi
035 $a 978-981-97-5967-5
040 $a GP $c GP
041 0 $a eng
050 4 $a TA401.3
072 7 $a TGM $2 bicssc
072 7 $a TEC021020 $2 bisacsh
072 7 $a TGM $2 thema
082 0 4 $a 620.11 $2 23
090 $a TA401.3 $b .I61 2023
111 2 $a Workshop on the Preservation of Stability under Discretization $d (2001 : $c Fort Collins, Colo.) $3 527686
245 1 0 $a Processing and fabrication of advanced materials. $n Volume 3 $h [electronic resource] : $b proceedings of the 29th International Conference on Processing and Fabrication of Advanced Materials (29th PFAM) September 6-8, 2023 / $c edited by Ajay Kumar ... [et al.].
246 3 $a 29th PFAM
260 $a Singapore : $c 2024. $b Springer Nature Singapore : $b Imprint: Springer,
300 $a xxiv, 509 p. : $b ill., digital ; $c 24 cm.
490 1 $a Springer proceedings in materials, $x 2662-317X ; $v v. 54
505 0 $a Magnetorheological Characterization Assessment of Composite Magnetic Abrasive Towards Surface Finishing -- Laser-Assisted Machining of Nickel-Based Super Alloys and Optimization of Cutting Force Using ANN -- Study Gas Film Formation Through the Current Signal in Electrochemical- Discharge-Machining (ECDM) With and Without a Magnetic Field -- Excimer Laser Micro-Texturing on Silicon Wafer Using Mask Projection Technique -- Impact of Chloroform Treatment on the Tensile Property of PETG and PLA Materials Fabricated via the Fused Deposition Modeling (FDM) Technique -- SLA-Printed Porous Acoustic Meta-Material -- Plasma Electrolytic Polishing Process: Mechanism and Characteristics -- Micro Channel Fabrication by Additive and Subtractive Methods -- Study on Rheological Behavior of Alumina Ceramic Slurry for Direct Ink Writing Process -- Experimental Investigation on MRR in Wire-EDM Machining S31803 Profile Surface With Different Currents -- Development of Polymer Composites Containing HDPE and ABS With Varied Levels of PTFE for Tribological Applications -- Effect of Deposition Rate and Deposition Speed During the Fabrication of Iron Aluminides With 10 Wt. % of Al Using CMT-TWAAM Process -- Compressive Mechanical Behaviour of Closed-Cell Hybrid Metallic Foam Under Quasi-Static Loading -- Influence of Texture Patterns and Cryogenic Coolant During Machining of Precipitation-Hardened SS -- Fabrication and Characterization of Polymer Composites With the Help of an Enhanced Vacuum Moulding Technique.
520 $a This book presents select proceedings of the International Conference on Processing and Fabrication of Advanced Materials (PFAM 2023) It covers the latest research in the areas of processing, fabrication, characterization and evaluation of traditional, advanced and emerging materials. The topics covered include various properties and performance attributes of modern-age materials. It further covers their applications in areas such as aerospace and other space-related industries, automobile, marine and defense, biomedical and healthcare, electronics and communications, energy storage/harvesting, heavy equipment, machinery and goods and semiconductor materials manufacturing. The book is a valuable reference for researchers and professionals interested in processing and fabrication of advanced materials and allied fields.
650 2 4 $a Biomaterials. $3 677000
650 2 4 $a Structural Materials. $3 677176
650 1 4 $a Materials for Devices. $3 1390009
650 0 $a Materials $v Dictionaries. $3 640203 $3 731034
700 1 $a Kumar, Ajay. $3 925704
710 2 $a SpringerLink (Online service) $3 593884
773 0 $t Springer Nature eBook
830 0 $a Springer proceedings in materials ; $v v. 23. $3 1414789
856 4 0 $u https://doi.org/10.1007/978-981-97-5967-5
950 $a Chemistry and Materials Science (SpringerNature-11644)