國立虎尾科技大學 |

Investigation of Processing and Annealing Conditions of Ohmic and Schottky Contacts on β-Ga2O3 with Enhanced Electrical Characteristics.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Investigation of Processing and Annealing Conditions of Ohmic and Schottky Contacts on β-Ga2O3 with Enhanced Electrical Characteristics./
作者:	Favela, Elizabeth Victoria.
面頁冊數:	1 online resource (144 pages)
附註:	Source: Dissertations Abstracts International, Volume: 84-11, Section: B.
Contained By:	Dissertations Abstracts International84-11B.
標題:	Materials science. -
電子資源:	click for full text (PQDT)
ISBN:	9798379516086

Investigation of Processing and Annealing Conditions of Ohmic and Schottky Contacts on β-Ga2O3 with Enhanced Electrical Characteristics.
Favela, Elizabeth Victoria.

Investigation of Processing and Annealing Conditions of Ohmic and Schottky Contacts on β-Ga2O3 with Enhanced Electrical Characteristics. - 1 online resource (144 pages)

Source: Dissertations Abstracts International, Volume: 84-11, Section: B.

Thesis (Ph.D.)--Carnegie Mellon University, 2023.

Includes bibliographical references

The prospects for growth of gallium oxide make it a promising wide band gap semiconductor. During the last 10 years, β-Ga2O3 has developed at a rapid rate, and a variety of new data has been produced on metal/ Ga2O3 interactions. When designing high-power electronic devices, it is crucial to understand the electrical properties of Schottky and ohmic contacts on β-Ga2O3. With an emphasis on improved thermal stability and electrical qualities, Schottky and ohmic contacts are studied.We investigate the electrical properties of Co/Au, Ni/Au and a Ni-based alloy as Schottky contacts on single-crystal n-type β-Ga2O3 substrates as a function of extended annealing time at 300 °C and 500 °C in air. Co and Ni were chosen because of their high work functions (5 eV and 5.25 eV, respectively) and previous work by our group that showed near-ideal Schottky diode characteristics with an ideality factor (n) of ~1.05 for these metals on (100) β-Ga2O3 1. In addition, positive free energies of reaction to form metal-oxides (NiO, Co3O4, and CoO) from Ga2O3 were calculated at 25-500 °C using the Factsage Database. This analysis indicates that Ni or Co should not reduce Ga2O3 to form Ni-oxide or Co-oxide at the interface, although it does not preclude the possibility of other reactions and reaction products. An Inconel 600 alloy that is based on Ni was also investigated because of its high-temperature corrosion resistance. Electrical properties of the contacts were determined from current-voltage (I-V) and capacitance-voltage (C-V) measurements conducted after sequential annealing treatments. Selected samples were characterized using high-resolution transmission electron microscopy (TEM), energy dispersive x-ray (EDX) spectroscopy, and scanning electron microscopy (SEM) to investigate changes in the morphology, microstructure, and chemical composition of the contacts after annealing.Thin (40-150 nm), highly-doped n+ (1019 - 1020 cm-3) Ga2O3 layers deposited using pulsed laser deposition (PLD) were incorporated into Ti/Au ohmic contacts on (001) and (010) β-Ga2O3 substrates with carrier concentrations between 2.5-5.1 x 1018 cm-3. Specific contact resistivity values were calculated for contact structures both without and with a PLD layer having different thicknesses up to 150 nm. With the exception of a 40 nm PLD layer on the (001) substrate, the specific contact resistivity values decreased with increasing PLD layer thickness: up to 8x on (001) Ga2O3 and up to 17x on (010) Ga2O3 compared to the samples without a PLD layer. The lowest average specific contact resistivities were achieved with 150 nm PLD layers: 3.48 x 10-5 ohms-cm2 on (001) Ga2O3 and 4.79 x 10-5 ohms-cm2 on (010) Ga2O3. Cross-section TEM images revealed differences in the microstructure and morphology of the PLD layers on the different substrate orientations. This study describes a low-temperature process that could be used to reduce the contact resistance in Ga2O3 devices.Lastly, the electrical properties of Ti/Au ohmic contacts on (001) and (010) single-crystal n-type Sn-doped β-Ga2O3 substrates with and without a 150 nm highly-doped n+ (1019 - 1020 cm-3) Ga2O3 layers deposited using PLD as a function of extended annealing time at 150 °C and 300 °C in air was investigated. Electrical properties of the contacts were determined from current-voltage (I-V) and specific contact resistivity values were calculated for contact structures both without and with a PLD layer. The results indicated that the use of a 150 nm PLD layer could improve the electrical properties of Sn-doped β- Ga2O3 substrates, resulting in lower specific contact resistivity. However, the PLD layer ceased to enhance the device's electrical characteristics after 150 hours of annealing at 300°C. The specific contact resistivity remained stable for the (001) Sn-doped substrate and for the (010) Sn-doped substrate with a 150 nm of n+ PLD layer after 500 and 400 hrs. of annealing at 150°C. Results suggest that the use of a PLD layer can improve the electrical properties of Sn-doped β-Ga2O3 substrates, leading to a lower specific contact resistivity.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798379516086Subjects--Topical Terms:

557839
Materials science.
Subjects--Index Terms:

Electronic materialsIndex Terms--Genre/Form:

554714
Electronic books.

Investigation of Processing and Annealing Conditions of Ohmic and Schottky Contacts on β-Ga2O3 with Enhanced Electrical Characteristics.
LDR:05587ntm a2200397K 4500 001 1141137
005 20231130111623.5
006 m o d
007 cr mn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798379516086
035 $a (MiAaPQ)AAI30490664
035 $a AAI30490664
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Favela, Elizabeth Victoria. $3 1464757
245 1 0 $a Investigation of Processing and Annealing Conditions of Ohmic and Schottky Contacts on β-Ga2O3 with Enhanced Electrical Characteristics.
264 0 $c 2023
300 $a 1 online resource (144 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 84-11, Section: B.
500 $a Advisor: Porter, Lisa.
502 $a Thesis (Ph.D.)--Carnegie Mellon University, 2023.
504 $a Includes bibliographical references
520 $a The prospects for growth of gallium oxide make it a promising wide band gap semiconductor. During the last 10 years, β-Ga2O3 has developed at a rapid rate, and a variety of new data has been produced on metal/ Ga2O3 interactions. When designing high-power electronic devices, it is crucial to understand the electrical properties of Schottky and ohmic contacts on β-Ga2O3. With an emphasis on improved thermal stability and electrical qualities, Schottky and ohmic contacts are studied.We investigate the electrical properties of Co/Au, Ni/Au and a Ni-based alloy as Schottky contacts on single-crystal n-type β-Ga2O3 substrates as a function of extended annealing time at 300 °C and 500 °C in air. Co and Ni were chosen because of their high work functions (5 eV and 5.25 eV, respectively) and previous work by our group that showed near-ideal Schottky diode characteristics with an ideality factor (n) of ~1.05 for these metals on (100) β-Ga2O3 1. In addition, positive free energies of reaction to form metal-oxides (NiO, Co3O4, and CoO) from Ga2O3 were calculated at 25-500 °C using the Factsage Database. This analysis indicates that Ni or Co should not reduce Ga2O3 to form Ni-oxide or Co-oxide at the interface, although it does not preclude the possibility of other reactions and reaction products. An Inconel 600 alloy that is based on Ni was also investigated because of its high-temperature corrosion resistance. Electrical properties of the contacts were determined from current-voltage (I-V) and capacitance-voltage (C-V) measurements conducted after sequential annealing treatments. Selected samples were characterized using high-resolution transmission electron microscopy (TEM), energy dispersive x-ray (EDX) spectroscopy, and scanning electron microscopy (SEM) to investigate changes in the morphology, microstructure, and chemical composition of the contacts after annealing.Thin (40-150 nm), highly-doped n+ (1019 - 1020 cm-3) Ga2O3 layers deposited using pulsed laser deposition (PLD) were incorporated into Ti/Au ohmic contacts on (001) and (010) β-Ga2O3 substrates with carrier concentrations between 2.5-5.1 x 1018 cm-3. Specific contact resistivity values were calculated for contact structures both without and with a PLD layer having different thicknesses up to 150 nm. With the exception of a 40 nm PLD layer on the (001) substrate, the specific contact resistivity values decreased with increasing PLD layer thickness: up to 8x on (001) Ga2O3 and up to 17x on (010) Ga2O3 compared to the samples without a PLD layer. The lowest average specific contact resistivities were achieved with 150 nm PLD layers: 3.48 x 10-5 ohms-cm2 on (001) Ga2O3 and 4.79 x 10-5 ohms-cm2 on (010) Ga2O3. Cross-section TEM images revealed differences in the microstructure and morphology of the PLD layers on the different substrate orientations. This study describes a low-temperature process that could be used to reduce the contact resistance in Ga2O3 devices.Lastly, the electrical properties of Ti/Au ohmic contacts on (001) and (010) single-crystal n-type Sn-doped β-Ga2O3 substrates with and without a 150 nm highly-doped n+ (1019 - 1020 cm-3) Ga2O3 layers deposited using PLD as a function of extended annealing time at 150 °C and 300 °C in air was investigated. Electrical properties of the contacts were determined from current-voltage (I-V) and specific contact resistivity values were calculated for contact structures both without and with a PLD layer. The results indicated that the use of a 150 nm PLD layer could improve the electrical properties of Sn-doped β- Ga2O3 substrates, resulting in lower specific contact resistivity. However, the PLD layer ceased to enhance the device's electrical characteristics after 150 hours of annealing at 300°C. The specific contact resistivity remained stable for the (001) Sn-doped substrate and for the (010) Sn-doped substrate with a 150 nm of n+ PLD layer after 500 and 400 hrs. of annealing at 150°C. Results suggest that the use of a PLD layer can improve the electrical properties of Sn-doped β-Ga2O3 substrates, leading to a lower specific contact resistivity.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Materials science. $3 557839
650 4 $a Electrical engineering. $3 596380
653 $a Electronic materials
653 $a Gallium oxide
653 $a Metal contacts
653 $a Ohmic contacts
653 $a Schottky contacts
653 $a Semiconductors
655 7 $a Electronic books. $2 local $3 554714
690 $a 0794
690 $a 0544
710 2 $a Carnegie Mellon University. $b Materials Science and Engineering. $3 1190340
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Dissertations Abstracts International $g 84-11B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30490664 $z click for full text (PQDT)