國立虎尾科技大學 |

Evaluation of ASCE 41 Guidelines for Performance-Based Seismic Assessment of Steel Moment-Frame and Concrete Shear Wall Buildings.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Evaluation of ASCE 41 Guidelines for Performance-Based Seismic Assessment of Steel Moment-Frame and Concrete Shear Wall Buildings./
作者:	Hernandez-Bassal, Laura Liliana.
面頁冊數:	1 online resource (143 pages)
附註:	Source: Dissertations Abstracts International, Volume: 85-02, Section: B.
Contained By:	Dissertations Abstracts International85-02B.
標題:	Environmental engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798379998387

Evaluation of ASCE 41 Guidelines for Performance-Based Seismic Assessment of Steel Moment-Frame and Concrete Shear Wall Buildings.
Hernandez-Bassal, Laura Liliana.

Evaluation of ASCE 41 Guidelines for Performance-Based Seismic Assessment of Steel Moment-Frame and Concrete Shear Wall Buildings. - 1 online resource (143 pages)

Source: Dissertations Abstracts International, Volume: 85-02, Section: B.

Thesis (Ph.D.)--University of California, Davis, 2023.

Includes bibliographical references

Performance-based seismic evaluation and retrofit of existing buildings documented in ASCE 41, a professionally recognized standard, contain guidelines and provisions that extend over several analysis procedures. The consistency between the linear and nonlinear analysis procedures outlined in the standard was investigated through the detailed assessment of four existing steel moment frame and concrete shear wall buildings in California. The buildings were instrumented by the California Strong Motion Instrumentation Program, which allowed for the calibration of the structural simulation models against recorded data from past earthquakes. The primary ASCE 41 based assessments of the calibrated models were followed by a comprehensive incremental dynamic analysis (IDA) of each building based on FEMA P-695 to evaluate the collapse probability inherent in the ASCE 41 Collapse Prevention performance level. Finally, a correlation between a system-based drift demand parameter and Immediate Occupancy (IO), Life Safety (LS), and Collapse Prevention (CP) was established for the four buildings.This dissertation addresses some of the core issues in ASCE 41 through comprehensive case studies of 3-story and 6-story steel moment frame buildings, and 3-story and 5-story reinforced concrete shear wall buildings. First, options for modeling of the primary structural components are explored, followed by a system-based calibration of the model against displacement and acceleration time histories in past earthquakes recorded at the site. For the steel buildings, a major focus was on obtaining the nonstructural stiffness contribution at low intensities, and understanding how the contribution of nonstructural components diminishes during strong shaking. For the concrete buildings, extensive effort was devoted to modeling options for flexural-controlled versus shear-controlled walls. The ASCE 41 assessments demonstrated inconsistency between the four analysis procedures. The linear static and linear dynamic procedures produce similar component demands, drifts, and performance levels but were shown to be conservative compared to the nonlinear procedures. The nonlinear static and nonlinear dynamic procedures differed significantly in component-demands and drift patterns, and the static procedure underestimated the demands in the upper stories of the six-story steel building. These basic assessments were followed by incremental dynamic analyses and collapse probability fragility curves were developed based on an assumed collapse condition at 6% story drift. Results from the simulation studies indicate that the current component-based Life Safety and Collapse Prevention performance levels are conservative and a quantified comparison is presented using a drift-based approach. Findings from this research work indicate the need to modify the current acceptance criteria for each performance level to include a system-based demand criteria. The dissertation concludes with recommendations for future research focused on developing methodologies to augment acceptance criteria as well as the need for improved guidelines for shear-controlled walls and ground motion scaling for hazard-consistent assessments.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798379998387Subjects--Topical Terms:

557376
Environmental engineering.
Subjects--Index Terms:

ASCE 41Index Terms--Genre/Form:

554714
Electronic books.

Evaluation of ASCE 41 Guidelines for Performance-Based Seismic Assessment of Steel Moment-Frame and Concrete Shear Wall Buildings.
LDR:04714ntm a22004097 4500 001 1141703
005 20240414211450.5
006 m o d
007 cr mn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798379998387
035 $a (MiAaPQ)AAI30314604
035 $a AAI30314604
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Hernandez-Bassal, Laura Liliana. $3 1465647
245 1 0 $a Evaluation of ASCE 41 Guidelines for Performance-Based Seismic Assessment of Steel Moment-Frame and Concrete Shear Wall Buildings.
264 0 $c 2023
300 $a 1 online resource (143 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-02, Section: B.
500 $a Advisor: Kunnath, Sashi K.
502 $a Thesis (Ph.D.)--University of California, Davis, 2023.
504 $a Includes bibliographical references
520 $a Performance-based seismic evaluation and retrofit of existing buildings documented in ASCE 41, a professionally recognized standard, contain guidelines and provisions that extend over several analysis procedures. The consistency between the linear and nonlinear analysis procedures outlined in the standard was investigated through the detailed assessment of four existing steel moment frame and concrete shear wall buildings in California. The buildings were instrumented by the California Strong Motion Instrumentation Program, which allowed for the calibration of the structural simulation models against recorded data from past earthquakes. The primary ASCE 41 based assessments of the calibrated models were followed by a comprehensive incremental dynamic analysis (IDA) of each building based on FEMA P-695 to evaluate the collapse probability inherent in the ASCE 41 Collapse Prevention performance level. Finally, a correlation between a system-based drift demand parameter and Immediate Occupancy (IO), Life Safety (LS), and Collapse Prevention (CP) was established for the four buildings.This dissertation addresses some of the core issues in ASCE 41 through comprehensive case studies of 3-story and 6-story steel moment frame buildings, and 3-story and 5-story reinforced concrete shear wall buildings. First, options for modeling of the primary structural components are explored, followed by a system-based calibration of the model against displacement and acceleration time histories in past earthquakes recorded at the site. For the steel buildings, a major focus was on obtaining the nonstructural stiffness contribution at low intensities, and understanding how the contribution of nonstructural components diminishes during strong shaking. For the concrete buildings, extensive effort was devoted to modeling options for flexural-controlled versus shear-controlled walls. The ASCE 41 assessments demonstrated inconsistency between the four analysis procedures. The linear static and linear dynamic procedures produce similar component demands, drifts, and performance levels but were shown to be conservative compared to the nonlinear procedures. The nonlinear static and nonlinear dynamic procedures differed significantly in component-demands and drift patterns, and the static procedure underestimated the demands in the upper stories of the six-story steel building. These basic assessments were followed by incremental dynamic analyses and collapse probability fragility curves were developed based on an assumed collapse condition at 6% story drift. Results from the simulation studies indicate that the current component-based Life Safety and Collapse Prevention performance levels are conservative and a quantified comparison is presented using a drift-based approach. Findings from this research work indicate the need to modify the current acceptance criteria for each performance level to include a system-based demand criteria. The dissertation concludes with recommendations for future research focused on developing methodologies to augment acceptance criteria as well as the need for improved guidelines for shear-controlled walls and ground motion scaling for hazard-consistent assessments.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Environmental engineering. $3 557376
650 4 $a Geophysics. $3 686174
650 4 $a Civil engineering. $3 561339
653 $a ASCE 41
653 $a Concrete shear wall
653 $a Instrumented buildings
653 $a Performance-based engineering
653 $a Seismic assessment
653 $a Steel moment frame
655 7 $a Electronic books. $2 local $3 554714
690 $a 0543
690 $a 0775
690 $a 0373
710 2 $a University of California, Davis. $b Civil and Environmental Engineering. $3 1179246
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Dissertations Abstracts International $g 85-02B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30314604 $z click for full text (PQDT)