國立虎尾科技大學 |

Circuits and Techniques for All-Digital Frequency Synthesizers and Design Automation.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Circuits and Techniques for All-Digital Frequency Synthesizers and Design Automation./
Author:	Kwon, Kyumin.
Description:	1 online resource (103 pages)
Notes:	Source: Dissertations Abstracts International, Volume: 85-03, Section: B.
Contained By:	Dissertations Abstracts International85-03B.
Subject:	Electrical engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9798380371094

Circuits and Techniques for All-Digital Frequency Synthesizers and Design Automation.
Kwon, Kyumin.

Circuits and Techniques for All-Digital Frequency Synthesizers and Design Automation. - 1 online resource (103 pages)

Source: Dissertations Abstracts International, Volume: 85-03, Section: B.

Thesis (Ph.D.)--University of Michigan, 2023.

Includes bibliographical references

As semiconductor fabrication process become complex to achieve target yield and performance in sub-20nm field-effect transistors (FETs), not only the number of design rule constraints (DRCs) exploded, but also the dependencies between different rules increased, which made manual layout design of custom chip more challenging and time consuming. While digital circuit design has been highly automated thanks to its better immunity to layout parasitic and mismatches, analog circuit design automation lags due to its layout sensitivity. As a solution for analog design automation, using standard digital flow to build a cell-based architecture has been suggested as one of few possibilities. This approach simplifies the design parameters to number of series/parallel cells from conventional width/lengths of every transistor, simplifying the modeling process. Also, it takes advantage of existing layout design engines that can handle complex DRCs, reducing one big step of design automation. Among analog circuits, clock generators have been extensively explored in the area of cell-based architecture due to the digital nature of clock signal and early development of all-digital architectures. But prior arts showed limits in two areas: 1) fully automating the design process starting from a user given specification, 2) systematic solution to alleviate the degradation of analog performance due to the automatic routing. In this dissertation, we propose an automated design flow for all digital phase locked loops (ADPLL) and architectural improvements including digital calibration scheme to push the performance limits of synthesizable clock generators. In chapter 2, design automation flow for baseline ADPLL architecture and novel feedforward scheme that doesn't require gain calibration is proposed. By combining physics-based equation and simulation results, we show a sample efficient (3 sets of simulation required) modeling method that successfully predicts key metrics of digitally controlled ring oscillator (DCO) with error rate less than 1.5%. A prototype design was fabricated in 65nm process using the automation flow. We also propose a feedforward technique that selects the closest edge to the reference clock among interpolated DCO edges. This technique is amenable to PnR tool and reduces the jitter by 4.22x when the DCO noise dominates the TDC quantization noise. Chapter 3 analyzes PLL fractional spur's impact on Bluetooth low energy (BLE) spectrum to define spectral mask for PLL that can satisfy that of the BLE. Also, we propose a novel two-step TDC architecture and calibration scheme to overcome the performance limits coming from random routings. The 1.8-2.7 GHz PLL was fabricated in 12nm FinFET technology, consuming 3.91 mW at 2.4006GHz achieving FoM of -220.7dB in fractional-N operation. Finally, chapter 4 proposes an all-digital fractional-N multiplying delay locked loop (MDLL) that uses reference triggered ring oscillator (RTRO) as a coarse DTC that reduces fine DTC range by 9x. Prototype design was fabricated in 65nm CMOS process and measured integer-N result shows 325 fs jitter and 16.1mW power consumption, achieving FoM of -237.7 dB. Simulated fractional-N operation shows worst case fractional spur of -41.9 dBc and rms jitter of 507 fs.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798380371094Subjects--Topical Terms:

596380
Electrical engineering.
Subjects--Index Terms:

Frequency synthesizerIndex Terms--Genre/Form:

554714
Electronic books.

Circuits and Techniques for All-Digital Frequency Synthesizers and Design Automation.
LDR:04636ntm a22003737 4500 001 1141806
005 20240414211524.5
006 m o d
007 cr mn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798380371094
035 $a (MiAaPQ)AAI30747503
035 $a (MiAaPQ)umichrackham005097
035 $a AAI30747503
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Kwon, Kyumin. $3 1465799
245 1 0 $a Circuits and Techniques for All-Digital Frequency Synthesizers and Design Automation.
264 0 $c 2023
300 $a 1 online resource (103 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-03, Section: B.
500 $a Advisor: Wentzloff, David.
502 $a Thesis (Ph.D.)--University of Michigan, 2023.
504 $a Includes bibliographical references
520 $a As semiconductor fabrication process become complex to achieve target yield and performance in sub-20nm field-effect transistors (FETs), not only the number of design rule constraints (DRCs) exploded, but also the dependencies between different rules increased, which made manual layout design of custom chip more challenging and time consuming. While digital circuit design has been highly automated thanks to its better immunity to layout parasitic and mismatches, analog circuit design automation lags due to its layout sensitivity. As a solution for analog design automation, using standard digital flow to build a cell-based architecture has been suggested as one of few possibilities. This approach simplifies the design parameters to number of series/parallel cells from conventional width/lengths of every transistor, simplifying the modeling process. Also, it takes advantage of existing layout design engines that can handle complex DRCs, reducing one big step of design automation. Among analog circuits, clock generators have been extensively explored in the area of cell-based architecture due to the digital nature of clock signal and early development of all-digital architectures. But prior arts showed limits in two areas: 1) fully automating the design process starting from a user given specification, 2) systematic solution to alleviate the degradation of analog performance due to the automatic routing. In this dissertation, we propose an automated design flow for all digital phase locked loops (ADPLL) and architectural improvements including digital calibration scheme to push the performance limits of synthesizable clock generators. In chapter 2, design automation flow for baseline ADPLL architecture and novel feedforward scheme that doesn't require gain calibration is proposed. By combining physics-based equation and simulation results, we show a sample efficient (3 sets of simulation required) modeling method that successfully predicts key metrics of digitally controlled ring oscillator (DCO) with error rate less than 1.5%. A prototype design was fabricated in 65nm process using the automation flow. We also propose a feedforward technique that selects the closest edge to the reference clock among interpolated DCO edges. This technique is amenable to PnR tool and reduces the jitter by 4.22x when the DCO noise dominates the TDC quantization noise. Chapter 3 analyzes PLL fractional spur's impact on Bluetooth low energy (BLE) spectrum to define spectral mask for PLL that can satisfy that of the BLE. Also, we propose a novel two-step TDC architecture and calibration scheme to overcome the performance limits coming from random routings. The 1.8-2.7 GHz PLL was fabricated in 12nm FinFET technology, consuming 3.91 mW at 2.4006GHz achieving FoM of -220.7dB in fractional-N operation. Finally, chapter 4 proposes an all-digital fractional-N multiplying delay locked loop (MDLL) that uses reference triggered ring oscillator (RTRO) as a coarse DTC that reduces fine DTC range by 9x. Prototype design was fabricated in 65nm CMOS process and measured integer-N result shows 325 fs jitter and 16.1mW power consumption, achieving FoM of -237.7 dB. Simulated fractional-N operation shows worst case fractional spur of -41.9 dBc and rms jitter of 507 fs.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Electrical engineering. $3 596380
650 4 $a Materials science. $3 557839
653 $a Frequency synthesizer
653 $a Phase locked loop
653 $a Digital frequency
655 7 $a Electronic books. $2 local $3 554714
690 $a 0544
690 $a 0794
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of Michigan. $b Electrical and Computer Engineering. $3 1372805
773 0 $t Dissertations Abstracts International $g 85-03B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30747503 $z click for full text (PQDT)