國立虎尾科技大學 |

High Voltage Power Supply for a Small Plasma Spectrometer.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	High Voltage Power Supply for a Small Plasma Spectrometer./
作者:	Luebke-Laroque, Quetzal.
面頁冊數:	1 online resource (170 pages)
附註:	Source: Masters Abstracts International, Volume: 85-02.
Contained By:	Masters Abstracts International85-02.
標題:	Aerospace engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798380114455

High Voltage Power Supply for a Small Plasma Spectrometer.
Luebke-Laroque, Quetzal.

High Voltage Power Supply for a Small Plasma Spectrometer. - 1 online resource (170 pages)

Source: Masters Abstracts International, Volume: 85-02.

Thesis (M.S.)--University of Alaska Fairbanks, 2023.

Includes bibliographical references

This thesis describes the design, manufacturing, and testing of a high voltage power supply for an electron spectrometer to be used on a small spacecraft. The challenge was reducing complexity, size, and power consumption enough to be useful for a CubeSat or a sounding rocket sub-payload. The power supply has two purposes: i) it produces DC at roughly 2000 V for a microchannel plate detector and ii) it produces exponential voltage sweeps from about +4000 V to below 5 V for an electrostatic analyzer. This power supply uses solid state relays for a charge pump and for producing voltage sweeps with capacitive discharge. The detector power supply is software and hardware regulated to provide tunable output up to 2400 V, with voltage drift and ripple of around ±1%. The power supply is managed by an MSP430 microcontroller. It includes several automatic, hardware-based, closed-loop controls to stabilize performance across a range of temperatures, input voltages, and component parameters. All digital switching, signal changes, measurements, and monitoring are done in a single control loop. The design includes thermal protection, current limiting, a hardware watchdog, transient voltage suppression, and hardware-based overvoltage protection. The circuits survived thermal vacuum testing, operating within specifications for several weeks during many cycles of -40 °C to +70 °C. The supply operated a real spectrometer inside an electron beam chamber. The consistent voltage sweeps allowed the spectrometer to accurately distinguish electron beam energies.This power supply is a successful proof of concept for powering a microchannel plate detector and an electrostatic analyzer at over 4000 V using a single 64 mm diameter circuit board, consuming 0.5 W or less from a small spacecraft.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798380114455Subjects--Topical Terms:

686400
Aerospace engineering.
Subjects--Index Terms:

CubeSatIndex Terms--Genre/Form:

554714
Electronic books.

High Voltage Power Supply for a Small Plasma Spectrometer.
LDR:03139ntm a22003977 4500 001 1142978
005 20240513061037.5
006 m o d
007 cr mn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798380114455
035 $a (MiAaPQ)AAI30574325
035 $a AAI30574325
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Luebke-Laroque, Quetzal. $3 1467522
245 1 0 $a High Voltage Power Supply for a Small Plasma Spectrometer.
264 0 $c 2023
300 $a 1 online resource (170 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 85-02.
500 $a Advisor: Thorsen, Denise.
502 $a Thesis (M.S.)--University of Alaska Fairbanks, 2023.
504 $a Includes bibliographical references
520 $a This thesis describes the design, manufacturing, and testing of a high voltage power supply for an electron spectrometer to be used on a small spacecraft. The challenge was reducing complexity, size, and power consumption enough to be useful for a CubeSat or a sounding rocket sub-payload. The power supply has two purposes: i) it produces DC at roughly 2000 V for a microchannel plate detector and ii) it produces exponential voltage sweeps from about +4000 V to below 5 V for an electrostatic analyzer. This power supply uses solid state relays for a charge pump and for producing voltage sweeps with capacitive discharge. The detector power supply is software and hardware regulated to provide tunable output up to 2400 V, with voltage drift and ripple of around ±1%. The power supply is managed by an MSP430 microcontroller. It includes several automatic, hardware-based, closed-loop controls to stabilize performance across a range of temperatures, input voltages, and component parameters. All digital switching, signal changes, measurements, and monitoring are done in a single control loop. The design includes thermal protection, current limiting, a hardware watchdog, transient voltage suppression, and hardware-based overvoltage protection. The circuits survived thermal vacuum testing, operating within specifications for several weeks during many cycles of -40 °C to +70 °C. The supply operated a real spectrometer inside an electron beam chamber. The consistent voltage sweeps allowed the spectrometer to accurately distinguish electron beam energies.This power supply is a successful proof of concept for powering a microchannel plate detector and an electrostatic analyzer at over 4000 V using a single 64 mm diameter circuit board, consuming 0.5 W or less from a small spacecraft.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Aerospace engineering. $3 686400
650 4 $a Plasma physics. $2 bicssc $3 1030958
650 4 $a Electrical engineering. $3 596380
653 $a CubeSat
653 $a Electrostatic analyzer
653 $a High voltage power supply
653 $a Microchannel plate
653 $a Hardware
655 7 $a Electronic books. $2 local $3 554714
690 $a 0544
690 $a 0759
690 $a 0538
710 2 $a University of Alaska Fairbanks. $b Electrical & Computer Engineering. $3 1467523
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Masters Abstracts International $g 85-02.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30574325 $z click for full text (PQDT)