國立虎尾科技大學 |

Characterization of 3D Printed Lattice Structures Used in the Design of Modified Compression Release Stabilized Transhumeral Prosthetic Sockets.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Characterization of 3D Printed Lattice Structures Used in the Design of Modified Compression Release Stabilized Transhumeral Prosthetic Sockets./
作者:	Myers, Jade.
面頁冊數:	1 online resource (183 pages)
附註:	Source: Dissertations Abstracts International, Volume: 85-07, Section: B.
Contained By:	Dissertations Abstracts International85-07B.
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798381193237

Characterization of 3D Printed Lattice Structures Used in the Design of Modified Compression Release Stabilized Transhumeral Prosthetic Sockets.
Myers, Jade.

Characterization of 3D Printed Lattice Structures Used in the Design of Modified Compression Release Stabilized Transhumeral Prosthetic Sockets. - 1 online resource (183 pages)

Source: Dissertations Abstracts International, Volume: 85-07, Section: B.

Thesis (Ph.D.)--Rochester Institute of Technology, 2023.

Includes bibliographical references

A prosthetic socket is the critical interface between a person and their prosthetic device. Pressure, shear, and friction experienced by the residual limb from wearing a socket can damage soft tissue. While Compression Release Stabilized (CRS) style sockets are beneficial for enhancing prosthesis stability, range of motion, and control, the abrupt differences in compression throughout the socket present risks for tissue damage to the residual limb. A socket design that enables clinicians to control a progressive decrease in firmness in the transition areas between compression and release could mitigate such undesirable effects. Density-graded lattice structures designed and produced with 3D printing technologies may allow this capability by providing gradual transitions in magnitudes of compression throughout modified CRS sockets.The primary aims of this study are to determine which features of lattice unit cells can produce lattice structures that can serve as compression and release areas within CRS style sockets, provide spatially variable compressibility to minimize the risk for tissue damage to the residuum, and print accurately without support structures on benchtop fused filament fabrication (FFF) 3D printers. These aims guide the following research questions which will be explored throughout this dissertation.RQ1: Can a single type of 3D printable lattice structure meet the requirements to serve as both compression and release areas of a modified transhumeral CRS style socket when its density is altered?RQ2: Is it possible to create a lattice model that linearly increases the compressibility magnitudes of a single lattice structure from the compression area requirements to release area requirements over a prescribed distance?RQ3: Which features of lattice unit cells are most associated with lattice structure printability on desktop fused filament fabrication (FFF) 3D printers?Two initial lattice structures comprised of selected unit cell types were compression tested to determine if they could produce the desired compressibility properties suitable for compression and release areas in a modified CRS socket. Because the research was primarily, though not exclusively, intended for prostheses production and use in the low-resource area of Haiti, factors that impact manufacturing time and materials cost were also explored. While these factors may be of interest in any area in the world, in Haiti, margins of feasibility for production are narrow due to such complexities as limited economic, healthcare, and electrical infrastructure.Compression testing revealed unit cells that provided adequate compression levels, but not suitable release levels. Both materials cost and print time were lower when using the Offset Diamond lattice type. It was demonstrated that density-graded lattice structures could be printed with compressibility values that could be varied over a definable distance.A procedure for assessing which characteristics affect lattice print accuracy and the need for support structures, here termed "lattice printability," was carried out on 29 additional lattice types. Printability testing indicated that lattice unit cell geometry and beam/wall thickness had significant impacts on lattice printability scores. Interactions between the cell type and beam thickness and the cell type and cell size were also noted.Procedures to characterize the compressibility and printability of 3D printed lattice structures were developed and executed. Evaluation of the feasibility of producing density-graded lattice structures suitable for incorporation in a novel CRS socket design concept was conducted. These procedures form the basis of the potential for producing customizable CRS sockets that consider the tissue properties of a residual limb.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798381193237Subjects--Topical Terms:

557493
Mechanical engineering.
Subjects--Index Terms:

3D printing technologiesIndex Terms--Genre/Form:

554714
Electronic books.

Characterization of 3D Printed Lattice Structures Used in the Design of Modified Compression Release Stabilized Transhumeral Prosthetic Sockets.
LDR:05301ntm a22004097 4500 001 1143699
005 20240517104633.5
006 m o d
007 cr mn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798381193237
035 $a (MiAaPQ)AAI30820087
035 $a AAI30820087
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Myers, Jade. $3 1468472
245 1 0 $a Characterization of 3D Printed Lattice Structures Used in the Design of Modified Compression Release Stabilized Transhumeral Prosthetic Sockets.
264 0 $c 2023
300 $a 1 online resource (183 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-07, Section: B.
500 $a Advisor: Phillips, Daniel.
502 $a Thesis (Ph.D.)--Rochester Institute of Technology, 2023.
504 $a Includes bibliographical references
520 $a A prosthetic socket is the critical interface between a person and their prosthetic device. Pressure, shear, and friction experienced by the residual limb from wearing a socket can damage soft tissue. While Compression Release Stabilized (CRS) style sockets are beneficial for enhancing prosthesis stability, range of motion, and control, the abrupt differences in compression throughout the socket present risks for tissue damage to the residual limb. A socket design that enables clinicians to control a progressive decrease in firmness in the transition areas between compression and release could mitigate such undesirable effects. Density-graded lattice structures designed and produced with 3D printing technologies may allow this capability by providing gradual transitions in magnitudes of compression throughout modified CRS sockets.The primary aims of this study are to determine which features of lattice unit cells can produce lattice structures that can serve as compression and release areas within CRS style sockets, provide spatially variable compressibility to minimize the risk for tissue damage to the residuum, and print accurately without support structures on benchtop fused filament fabrication (FFF) 3D printers. These aims guide the following research questions which will be explored throughout this dissertation.RQ1: Can a single type of 3D printable lattice structure meet the requirements to serve as both compression and release areas of a modified transhumeral CRS style socket when its density is altered?RQ2: Is it possible to create a lattice model that linearly increases the compressibility magnitudes of a single lattice structure from the compression area requirements to release area requirements over a prescribed distance?RQ3: Which features of lattice unit cells are most associated with lattice structure printability on desktop fused filament fabrication (FFF) 3D printers?Two initial lattice structures comprised of selected unit cell types were compression tested to determine if they could produce the desired compressibility properties suitable for compression and release areas in a modified CRS socket. Because the research was primarily, though not exclusively, intended for prostheses production and use in the low-resource area of Haiti, factors that impact manufacturing time and materials cost were also explored. While these factors may be of interest in any area in the world, in Haiti, margins of feasibility for production are narrow due to such complexities as limited economic, healthcare, and electrical infrastructure.Compression testing revealed unit cells that provided adequate compression levels, but not suitable release levels. Both materials cost and print time were lower when using the Offset Diamond lattice type. It was demonstrated that density-graded lattice structures could be printed with compressibility values that could be varied over a definable distance.A procedure for assessing which characteristics affect lattice print accuracy and the need for support structures, here termed "lattice printability," was carried out on 29 additional lattice types. Printability testing indicated that lattice unit cell geometry and beam/wall thickness had significant impacts on lattice printability scores. Interactions between the cell type and beam thickness and the cell type and cell size were also noted.Procedures to characterize the compressibility and printability of 3D printed lattice structures were developed and executed. Evaluation of the feasibility of producing density-graded lattice structures suitable for incorporation in a novel CRS socket design concept was conducted. These procedures form the basis of the potential for producing customizable CRS sockets that consider the tissue properties of a residual limb.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Biomedical engineering. $3 588770
650 4 $a Industrial engineering. $3 679492
653 $a 3D printing technologies
653 $a Additive manufacturing
653 $a Lattice
653 $a Low resource area
653 $a Prosthetic socket
653 $a Prosthetics
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0541
690 $a 0546
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Rochester Institute of Technology. $b Industrial Engineering. $3 1468473
773 0 $t Dissertations Abstracts International $g 85-07B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30820087 $z click for full text (PQDT)