國立虎尾科技大學 |

Field Driven Design of Graded Cellular Structures.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Field Driven Design of Graded Cellular Structures./
作者:	Shinde, Mandar Hanamant.
面頁冊數:	1 online resource (203 pages)
附註:	Source: Dissertations Abstracts International, Volume: 84-11, Section: B.
Contained By:	Dissertations Abstracts International84-11B.
標題:	Engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798379524371

Field Driven Design of Graded Cellular Structures.
Shinde, Mandar Hanamant.

Field Driven Design of Graded Cellular Structures. - 1 online resource (203 pages)

Source: Dissertations Abstracts International, Volume: 84-11, Section: B.

Thesis (Ph.D.)--Arizona State University, 2023.

Includes bibliographical references

The design of energy absorbing structures is driven by application specific requirements like the amount of energy to be absorbed, maximum transmitted stress that is permissible, stroke length, and available enclosing space. Cellular structures like foams are commonly leveraged in nature for energy absorption and have also found use in engineering applications. With the possibility of manufacturing complex cellular shapes using additive manufacturing technologies, there is an opportunity to explore new topologies that improve energy absorption performance. This thesis aims to systematically understand the relationships between four key elements: (i) unit cell topology, (ii) material composition, (iii) relative density, and (iv) fields; and energy absorption behavior, and then leverage this understanding to develop, implement and validate a methodology to design the ideal cellular structure energy absorber. After a review of the literature in the domain of additively manufactured cellular materials for energy absorption, results from quasistatic compression of six cellular structures (hexagonal honeycomb, auxetic and Voronoi lattice, and diamond, Gyroid, and Schwarz-P) manufactured out of AlSi10Mg and Nylon12. These cellular structures were compared to each other in the context of four designrelevant metrics to understand the influence of cell design on the deformation and failure behavior. Three new and revised metrics for energy absorption were proposed to enable more meaningful comparisons and subsequent design selection. Triply Periodic Minimal Surface (TPMS) structures were found to have the most promising overall performance and formed the basis for the numerical investigation of the effect of fields on the energy TPMS structures and validated against experimental data. A range of analytical and stochastic fields were then evaluated that modified the TPMS structure, some of which were found to be effective in enhancing energy absorption behavior in the structures while retaining the same relative density. Combining findings from studies on the role of cell geometry, composition, relative density and fields, this thesis concludes with the development of a design framework that can enable the formulation of cellular material energy absorbers with idealized behavior.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798379524371Subjects--Topical Terms:

561152
Engineering.
Subjects--Index Terms:

Additive manufacturingIndex Terms--Genre/Form:

554714
Electronic books.

Field Driven Design of Graded Cellular Structures.
LDR:03649ntm a22003857 4500 001 1143734
005 20240517104938.5
006 m o d
007 cr mn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798379524371
035 $a (MiAaPQ)AAI30313738
035 $a AAI30313738
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Shinde, Mandar Hanamant. $3 1468516
245 1 0 $a Field Driven Design of Graded Cellular Structures.
264 0 $c 2023
300 $a 1 online resource (203 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 84-11, Section: B.
500 $a Advisor: Bhate, Dhruv.
502 $a Thesis (Ph.D.)--Arizona State University, 2023.
504 $a Includes bibliographical references
520 $a The design of energy absorbing structures is driven by application specific requirements like the amount of energy to be absorbed, maximum transmitted stress that is permissible, stroke length, and available enclosing space. Cellular structures like foams are commonly leveraged in nature for energy absorption and have also found use in engineering applications. With the possibility of manufacturing complex cellular shapes using additive manufacturing technologies, there is an opportunity to explore new topologies that improve energy absorption performance. This thesis aims to systematically understand the relationships between four key elements: (i) unit cell topology, (ii) material composition, (iii) relative density, and (iv) fields; and energy absorption behavior, and then leverage this understanding to develop, implement and validate a methodology to design the ideal cellular structure energy absorber. After a review of the literature in the domain of additively manufactured cellular materials for energy absorption, results from quasistatic compression of six cellular structures (hexagonal honeycomb, auxetic and Voronoi lattice, and diamond, Gyroid, and Schwarz-P) manufactured out of AlSi10Mg and Nylon12. These cellular structures were compared to each other in the context of four designrelevant metrics to understand the influence of cell design on the deformation and failure behavior. Three new and revised metrics for energy absorption were proposed to enable more meaningful comparisons and subsequent design selection. Triply Periodic Minimal Surface (TPMS) structures were found to have the most promising overall performance and formed the basis for the numerical investigation of the effect of fields on the energy TPMS structures and validated against experimental data. A range of analytical and stochastic fields were then evaluated that modified the TPMS structure, some of which were found to be effective in enhancing energy absorption behavior in the structures while retaining the same relative density. Combining findings from studies on the role of cell geometry, composition, relative density and fields, this thesis concludes with the development of a design framework that can enable the formulation of cellular material energy absorbers with idealized behavior.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Engineering. $3 561152
650 4 $a Mechanical engineering. $3 557493
650 4 $a Energy. $3 784773
653 $a Additive manufacturing
653 $a Cellular structures
653 $a Energy Absorption
653 $a Triply Periodic Minimal Surface
655 7 $a Electronic books. $2 local $3 554714
690 $a 0537
690 $a 0548
690 $a 0791
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Arizona State University. $b Mechanical Engineering. $3 845641
773 0 $t Dissertations Abstracts International $g 84-11B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30313738 $z click for full text (PQDT)