國立虎尾科技大學 |

Fracture behavior of nano-scale rubber-modified epoxies.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Fracture behavior of nano-scale rubber-modified epoxies./
作者:	Bacigalupo, Lauren N.
面頁冊數:	1 online resource (146 pages)
附註:	Source: Dissertations Abstracts International, Volume: 75-06, Section: B.
Contained By:	Dissertations Abstracts International75-06B.
標題:	Polymer chemistry. -
電子資源:	click for full text (PQDT)
ISBN:	9781303478079

Fracture behavior of nano-scale rubber-modified epoxies.
Bacigalupo, Lauren N.

Fracture behavior of nano-scale rubber-modified epoxies. - 1 online resource (146 pages)

Source: Dissertations Abstracts International, Volume: 75-06, Section: B.

Thesis (Ph.D.)--Lehigh University, 2013.

Includes bibliographical references

The primary focus of the first portion of this study is to compare physical and mechanical properties of a model epoxy that has been toughened with one of three different types of rubber-based modifier: a traditional telechelic oligomer (phase separates into micro-size particles), a core-shell latex particle (preformed nano-scale particles) and a triblock copolymer (self-assembles into nano-scale particles). The effect of modifier content on the physical properties of the matrix was determined using several thermal analysis methods, which provided insight into any inherent alterations of the epoxy matrix. Although the primary objective is to study the role of particle size on the fracture toughness, stiffness and strength were also determined since these properties are often reduced in rubber-toughened epoxies. It was found that since the CSR- and SBM-modified epoxies are composed of less rubber, thermal and mechanical properties of the epoxy were better maintained. In order to better understand the fracture behavior and mechanisms of the three types of rubber particles utilized in this study, extensive microscopy analysis was conducted. Scanning transmission electron microscopy (STEM) was used to quantify the volume fraction of particles, transmission optical microscopy (TOM) was used to determine plastic damage zone size, and scanning electron microscopy (SEM) was used to assess void growth in the plastic zone after fracture. By quantifying these characteristics, it was then possible to model the plastic damage zone size as well as the fracture toughness to elucidate the behavior of the rubber-modified epoxies. It was found that localized shear yielding and matrix void growth are the active toughening mechanisms in all rubber-modified epoxies in this study, however, matrix void growth was more prevalent. The second portion of this study investigated the use of three acrylate-based triblocks and four acrylate-based diblocks to modify a model epoxy system. By varying block lengths and the polarity of the epoxy-miscible blocks, a variety of morphologies were generated (such as spherical micelles, layer particles and worm-like micelles). It was found that in some cases, the epoxy-miscible block did not yield domains substantial enough to facilitate increases in toughness. Overall, the thermal and mechanical properties of the acrylate-based triblock- and diblock-modified epoxies were found to be similar to CTBN-modified epoxy, which was used as a control. However, there were properties that were improved with the acrylate-based diblock-modified epoxies when compared to the acrylate-based triblock modified epoxies. Specifically, the viscosity penalty of the diblock-modified epoxies was shown to be a marked improvement over the triblock-modified epoxies, especially given that the fracture toughness values are similar. This reduction in the viscosity penalty becomes an important criterion when considering processing procedures and applications. Additionally, comparing the morphology of the resulting modified-epoxies utilizing atomic force microscopy (AFM) and scanning electron microscopy (SEM) led to a better understanding of the relationship between the particle morphology obtained and the physical properties of the acrylate-based rubber-modified epoxy systems in this research.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9781303478079Subjects--Topical Terms:

1182163
Polymer chemistry.
Subjects--Index Terms:

Fracture toughnessIndex Terms--Genre/Form:

554714
Electronic books.

Fracture behavior of nano-scale rubber-modified epoxies.
LDR:04715ntm a22003977 4500 001 1144321
005 20240531083828.5
006 m o d
007 cr mn ---uuuuu
008 250605s2013 xx obm 000 0 eng d
020 $a 9781303478079
035 $a (MiAaPQ)AAI3598871
035 $a (MiAaPQ)lehigh:11008
035 $a AAI3598871
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Bacigalupo, Lauren N. $3 1469311
245 1 0 $a Fracture behavior of nano-scale rubber-modified epoxies.
264 0 $c 2013
300 $a 1 online resource (146 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 75-06, Section: B.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Pearson, Raymond A.
502 $a Thesis (Ph.D.)--Lehigh University, 2013.
504 $a Includes bibliographical references
520 $a The primary focus of the first portion of this study is to compare physical and mechanical properties of a model epoxy that has been toughened with one of three different types of rubber-based modifier: a traditional telechelic oligomer (phase separates into micro-size particles), a core-shell latex particle (preformed nano-scale particles) and a triblock copolymer (self-assembles into nano-scale particles). The effect of modifier content on the physical properties of the matrix was determined using several thermal analysis methods, which provided insight into any inherent alterations of the epoxy matrix. Although the primary objective is to study the role of particle size on the fracture toughness, stiffness and strength were also determined since these properties are often reduced in rubber-toughened epoxies. It was found that since the CSR- and SBM-modified epoxies are composed of less rubber, thermal and mechanical properties of the epoxy were better maintained. In order to better understand the fracture behavior and mechanisms of the three types of rubber particles utilized in this study, extensive microscopy analysis was conducted. Scanning transmission electron microscopy (STEM) was used to quantify the volume fraction of particles, transmission optical microscopy (TOM) was used to determine plastic damage zone size, and scanning electron microscopy (SEM) was used to assess void growth in the plastic zone after fracture. By quantifying these characteristics, it was then possible to model the plastic damage zone size as well as the fracture toughness to elucidate the behavior of the rubber-modified epoxies. It was found that localized shear yielding and matrix void growth are the active toughening mechanisms in all rubber-modified epoxies in this study, however, matrix void growth was more prevalent. The second portion of this study investigated the use of three acrylate-based triblocks and four acrylate-based diblocks to modify a model epoxy system. By varying block lengths and the polarity of the epoxy-miscible blocks, a variety of morphologies were generated (such as spherical micelles, layer particles and worm-like micelles). It was found that in some cases, the epoxy-miscible block did not yield domains substantial enough to facilitate increases in toughness. Overall, the thermal and mechanical properties of the acrylate-based triblock- and diblock-modified epoxies were found to be similar to CTBN-modified epoxy, which was used as a control. However, there were properties that were improved with the acrylate-based diblock-modified epoxies when compared to the acrylate-based triblock modified epoxies. Specifically, the viscosity penalty of the diblock-modified epoxies was shown to be a marked improvement over the triblock-modified epoxies, especially given that the fracture toughness values are similar. This reduction in the viscosity penalty becomes an important criterion when considering processing procedures and applications. Additionally, comparing the morphology of the resulting modified-epoxies utilizing atomic force microscopy (AFM) and scanning electron microscopy (SEM) led to a better understanding of the relationship between the particle morphology obtained and the physical properties of the acrylate-based rubber-modified epoxy systems in this research.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Polymer chemistry. $3 1182163
650 4 $a Materials science. $3 557839
653 $a Fracture toughness
653 $a Morphology
653 $a Properties
653 $a Rubber modified epoxy
655 7 $a Electronic books. $2 local $3 554714
690 $a 0495
690 $a 0794
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Lehigh University. $b Polymer Science and Engineering. $3 1467622
773 0 $t Dissertations Abstracts International $g 75-06B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3598871 $z click for full text (PQDT)