國立虎尾科技大學 |

Thin-Film Synthesis of Metal Halide Perovskites for Optoelectronics.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Thin-Film Synthesis of Metal Halide Perovskites for Optoelectronics./
Author:	Clark, Catherine Paige Gaburo.
Description:	1 online resource (276 pages)
Notes:	Source: Dissertations Abstracts International, Volume: 83-05, Section: B.
Contained By:	Dissertations Abstracts International83-05B.
Subject:	Energy. -
Online resource:	click for full text (PQDT)
ISBN:	9798460481484

Thin-Film Synthesis of Metal Halide Perovskites for Optoelectronics.
Clark, Catherine Paige Gaburo.

Thin-Film Synthesis of Metal Halide Perovskites for Optoelectronics. - 1 online resource (276 pages)

Source: Dissertations Abstracts International, Volume: 83-05, Section: B.

Thesis (Ph.D.)--University of Minnesota, 2020.

Includes bibliographical references

Metal halide perovskites (MHPs), like the archetypal methylammonium lead iodide (MAPbI3), have emerged in the last decade as promising materials for efficient, low-cost optoelectronics. MHP solar cells have already reached efficiencies > 25%, rivaling established technologies like single-crystal Si. Yet several challenges prevent the widespread commercialization of MHPs, including their instability in ambient conditions, their toxicity, and the need for scaleable fabrication techniques. Fundamentally, the origins of important material properties relating to carrier transport and recombination are still not well understood. Thin film deposition techniques that enable detailed study of process-structure-property relationships and are commercially relevant are consequently becoming increasingly essential.This thesis seeks to address these challenges through the design, implementation, and utilization of a carrier-gas assisted vapor deposition (CGAVD) method that can grow MHP films with highly tunable stoichiometries and morphologies. Alongside the design of a CGAVD system with six independently controllable experimental parameters, an analytical model is developed and experimentally validated that allows the determination of robust and repeatable growth regimes and the prediction of material deposition rates.Harnessing this technique, we demonstrate the ability to deposit MASnI3 and MASnBr3 films and to systematically vary their compositions across a wide range, and realize corresponding changes in film microstructures (grain size, coverage) and electronic properties (resistivity, carrier concentration, mobility). Control of grain size and film texturing is also achieved independent of stoichiometry via modulation of chamber pressure and substrate temperature.The benefits of CGAVD are further highlighted by the successful growth of novel all-MHP heterojunctions. Two stable pairings are identified: MAPbBr3/MASnBr3 and CsPbBr3/MASnBr3. Design rules to control the mixing of heterojunctions are developed by exploring the dependence of mixing rate on MHP layer composition and grain size. Finally, through a collaboration with Physical Electronics, we optimize the use of XPS depth-profiling for MHPs and investigate which ions are diffusing in a layered structure that exhibits mixing.Moving forward, the incorporation of CGAVD-grown heterojunctions and Pb MHPs into optoelectronic devices will harness the tunability of this system towards a deeper understanding of process-structure-property relationships in MHP thin films and novel layered structures.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798460481484Subjects--Topical Terms:

784773
Energy.
Subjects--Index Terms:

OptoelectronicsIndex Terms--Genre/Form:

554714
Electronic books.

Thin-Film Synthesis of Metal Halide Perovskites for Optoelectronics.
LDR:03961ntm a22003977 4500 001 1144591
005 20240611104313.5
006 m o d
007 cr mn ---uuuuu
008 250605s2020 xx obm 000 0 eng d
020 $a 9798460481484
035 $a (MiAaPQ)AAI28092797
035 $a AAI28092797
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Clark, Catherine Paige Gaburo. $3 1469666
245 1 0 $a Thin-Film Synthesis of Metal Halide Perovskites for Optoelectronics.
264 0 $c 2020
300 $a 1 online resource (276 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 83-05, Section: B.
500 $a Advisor: Aydil, Eray S.;Holmes, Russell J.
502 $a Thesis (Ph.D.)--University of Minnesota, 2020.
504 $a Includes bibliographical references
520 $a Metal halide perovskites (MHPs), like the archetypal methylammonium lead iodide (MAPbI3), have emerged in the last decade as promising materials for efficient, low-cost optoelectronics. MHP solar cells have already reached efficiencies > 25%, rivaling established technologies like single-crystal Si. Yet several challenges prevent the widespread commercialization of MHPs, including their instability in ambient conditions, their toxicity, and the need for scaleable fabrication techniques. Fundamentally, the origins of important material properties relating to carrier transport and recombination are still not well understood. Thin film deposition techniques that enable detailed study of process-structure-property relationships and are commercially relevant are consequently becoming increasingly essential.This thesis seeks to address these challenges through the design, implementation, and utilization of a carrier-gas assisted vapor deposition (CGAVD) method that can grow MHP films with highly tunable stoichiometries and morphologies. Alongside the design of a CGAVD system with six independently controllable experimental parameters, an analytical model is developed and experimentally validated that allows the determination of robust and repeatable growth regimes and the prediction of material deposition rates.Harnessing this technique, we demonstrate the ability to deposit MASnI3 and MASnBr3 films and to systematically vary their compositions across a wide range, and realize corresponding changes in film microstructures (grain size, coverage) and electronic properties (resistivity, carrier concentration, mobility). Control of grain size and film texturing is also achieved independent of stoichiometry via modulation of chamber pressure and substrate temperature.The benefits of CGAVD are further highlighted by the successful growth of novel all-MHP heterojunctions. Two stable pairings are identified: MAPbBr3/MASnBr3 and CsPbBr3/MASnBr3. Design rules to control the mixing of heterojunctions are developed by exploring the dependence of mixing rate on MHP layer composition and grain size. Finally, through a collaboration with Physical Electronics, we optimize the use of XPS depth-profiling for MHPs and investigate which ions are diffusing in a layered structure that exhibits mixing.Moving forward, the incorporation of CGAVD-grown heterojunctions and Pb MHPs into optoelectronic devices will harness the tunability of this system towards a deeper understanding of process-structure-property relationships in MHP thin films and novel layered structures.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Energy. $3 784773
650 4 $a Materials science. $3 557839
653 $a Optoelectronics
653 $a Perovskites
653 $a Photovoltaics
653 $a Solar cells
653 $a Thin films
653 $a Vapor deposition
655 7 $a Electronic books. $2 local $3 554714
690 $a 0794
690 $a 0791
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of Minnesota. $b Material Science and Engineering. $3 1178985
773 0 $t Dissertations Abstracts International $g 83-05B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28092797 $z click for full text (PQDT)