國立虎尾科技大學 |

Effects of Surface Roughness on Shock-Wave/Boundary-Layer Interactions at Mach 7.2.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Effects of Surface Roughness on Shock-Wave/Boundary-Layer Interactions at Mach 7.2./
作者:	Hoffman, Eugene Nii Akwei.
面頁冊數:	1 online resource (329 pages)
附註:	Source: Dissertations Abstracts International, Volume: 84-11, Section: B.
Contained By:	Dissertations Abstracts International84-11B.
標題:	Aerospace engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798379579661

Effects of Surface Roughness on Shock-Wave/Boundary-Layer Interactions at Mach 7.2.
Hoffman, Eugene Nii Akwei.

Effects of Surface Roughness on Shock-Wave/Boundary-Layer Interactions at Mach 7.2. - 1 online resource (329 pages)

Source: Dissertations Abstracts International, Volume: 84-11, Section: B.

Thesis (Ph.D.)--The University of Texas at San Antonio, 2023.

Includes bibliographical references

This research work studies the effects of surface roughness on shock-wave/boundary-layer interactions (SWBLIs). SWBLI are prevalent in supersonic and hypersonic flows and occur when a shockwave generated from geometrical changes on a high-speed vehicle impinges on the vehicle's boundary layer. This complex phenomenon can be catastrophic and warrants the need for investigation to gain a full understanding of its dynamics. This study was performed in the newly completed UTSA Mach 7 Ludwieg tube wind tunnel facility which can operate at stagnation pressures up to 13.8 MPa and temperatures up to 700 K creating Mach 7.2 flows with Reynold numbers of up to 200 x 106 m-1. The facility boasts a highly optically accessible test section with a 203 mm x 203 mm cross-section with a 152 mm x 152 mm useable core. A flat plate with a 33° compression ramp was used to generate the interaction during experimentation. A carbon fiber composite material was employed to create the desired surface roughness condition which juxtaposed the smooth surface baseline condition reflective of the vast majority of the current literature base. Diagnostic techniques applied to study this phenomenon included high-speed schlieren imaging, pressure- and temperature-sensitive paint, acetone molecular tagging velocimetry, and high-speed surface pressure probes. Results showed the roughness, characterized to be in the hydraulically smooth regime, decreased the interaction size based on a boundary layer normalized length scale, decreased the broadband low-frequency content present, and increased pressures, temperatures, and heat flux transmission to the compression ramp.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798379579661Subjects--Topical Terms:

686400
Aerospace engineering.
Subjects--Index Terms:

HypersonicIndex Terms--Genre/Form:

554714
Electronic books.

Effects of Surface Roughness on Shock-Wave/Boundary-Layer Interactions at Mach 7.2.
LDR:03043ntm a22003977 4500 001 1145080
005 20240617111340.5
006 m o d
007 cr mn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798379579661
035 $a (MiAaPQ)AAI30423475
035 $a AAI30423475
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Hoffman, Eugene Nii Akwei. $3 1470292
245 1 0 $a Effects of Surface Roughness on Shock-Wave/Boundary-Layer Interactions at Mach 7.2.
264 0 $c 2023
300 $a 1 online resource (329 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 84-11, Section: B.
500 $a Advisor: Combs, Christopher S.
502 $a Thesis (Ph.D.)--The University of Texas at San Antonio, 2023.
504 $a Includes bibliographical references
520 $a This research work studies the effects of surface roughness on shock-wave/boundary-layer interactions (SWBLIs). SWBLI are prevalent in supersonic and hypersonic flows and occur when a shockwave generated from geometrical changes on a high-speed vehicle impinges on the vehicle's boundary layer. This complex phenomenon can be catastrophic and warrants the need for investigation to gain a full understanding of its dynamics. This study was performed in the newly completed UTSA Mach 7 Ludwieg tube wind tunnel facility which can operate at stagnation pressures up to 13.8 MPa and temperatures up to 700 K creating Mach 7.2 flows with Reynold numbers of up to 200 x 106 m-1. The facility boasts a highly optically accessible test section with a 203 mm x 203 mm cross-section with a 152 mm x 152 mm useable core. A flat plate with a 33° compression ramp was used to generate the interaction during experimentation. A carbon fiber composite material was employed to create the desired surface roughness condition which juxtaposed the smooth surface baseline condition reflective of the vast majority of the current literature base. Diagnostic techniques applied to study this phenomenon included high-speed schlieren imaging, pressure- and temperature-sensitive paint, acetone molecular tagging velocimetry, and high-speed surface pressure probes. Results showed the roughness, characterized to be in the hydraulically smooth regime, decreased the interaction size based on a boundary layer normalized length scale, decreased the broadband low-frequency content present, and increased pressures, temperatures, and heat flux transmission to the compression ramp.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Aerospace engineering. $3 686400
650 4 $a Fluid mechanics. $3 555551
650 4 $a Mechanical engineering. $3 557493
653 $a Hypersonic
653 $a Ludwieg tube
653 $a Shockwave
653 $a Surface roughness
653 $a Wind tunnel
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0204
690 $a 0538
710 2 $a The University of Texas at San Antonio. $b Mechanical Engineering. $3 1178945
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Dissertations Abstracts International $g 84-11B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30423475 $z click for full text (PQDT)