國立虎尾科技大學 |

Development of Low-Temperature Atomic Layer Deposition of Ultra-Thin RuCo Direct Plate Liners for Flexible Electronics Applications.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Development of Low-Temperature Atomic Layer Deposition of Ultra-Thin RuCo Direct Plate Liners for Flexible Electronics Applications./
Author:	Gregory, Dillon A.
Description:	1 online resource (44 pages)
Notes:	Source: Masters Abstracts International, Volume: 78-04.
Contained By:	Masters Abstracts International78-04.
Subject:	Nanoscience. -
Online resource:	click for full text (PQDT)
ISBN:	9781339999036

Development of Low-Temperature Atomic Layer Deposition of Ultra-Thin RuCo Direct Plate Liners for Flexible Electronics Applications.
Gregory, Dillon A.

Development of Low-Temperature Atomic Layer Deposition of Ultra-Thin RuCo Direct Plate Liners for Flexible Electronics Applications. - 1 online resource (44 pages)

Source: Masters Abstracts International, Volume: 78-04.

Thesis (M.S.)--State University of New York at Albany, 2016.

Includes bibliographical references

Low temperature plasma-assisted atomic layer deposition-grown metal nanocomposite layers based on mixtures of ruthenium and cobalt have been investigated as potential copper adhesion/barrier layers in flexible electronics applications. The success of adapting this process to flexible electronics depends on the candidate barriers meeting several necessary properties including sufficient electrical conductivity, compatibility with Cu electroplating, and ability to prevent Cu diffusion into the substrate. Preliminary testing has shown that atomic layer deposition (ALD) can be used as a technique for depositing alloyed metallic barrier layers at the lower thermal constraints dictated by the use of polymer substrates and still produce continuous and electrically conductive metallic thin films. This has been achieved by lowering ALD processing temperatures to below the glass transition temperatures of polymeric substrate materials used in flexible electronics, including polyimide (PI), polyethylene terephthalate (PET), and polyethylene naphthalate (PEN) in order to maintain their structural integrity. These liner films, processed at temperatures as low as 100°C, are observed to support direct (i.e. seedless) electrochemical deposition of copper, though they failed to effectively act as barriers preventing copper diffusion into the dielectric substrate material. Possible reasons for this behavior and additional studies to address it are also discussed.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9781339999036Subjects--Topical Terms:

632473
Nanoscience.
Subjects--Index Terms:

Atomic layer depositionIndex Terms--Genre/Form:

554714
Electronic books.

Development of Low-Temperature Atomic Layer Deposition of Ultra-Thin RuCo Direct Plate Liners for Flexible Electronics Applications.
LDR:02895ntm a22003737 4500 001 1145404
005 20240624103640.5
006 m o d
007 cr bn ---uuuuu
008 250605s2016 xx obm 000 0 eng d
020 $a 9781339999036
035 $a (MiAaPQ)AAI10144785
035 $a (MiAaPQ)sunyalb:11934
035 $a AAI10144785
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Gregory, Dillon A. $3 1437595
245 1 0 $a Development of Low-Temperature Atomic Layer Deposition of Ultra-Thin RuCo Direct Plate Liners for Flexible Electronics Applications.
264 0 $c 2016
300 $a 1 online resource (44 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 78-04.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Eisenbraun, Eric T.
502 $a Thesis (M.S.)--State University of New York at Albany, 2016.
504 $a Includes bibliographical references
520 $a Low temperature plasma-assisted atomic layer deposition-grown metal nanocomposite layers based on mixtures of ruthenium and cobalt have been investigated as potential copper adhesion/barrier layers in flexible electronics applications. The success of adapting this process to flexible electronics depends on the candidate barriers meeting several necessary properties including sufficient electrical conductivity, compatibility with Cu electroplating, and ability to prevent Cu diffusion into the substrate. Preliminary testing has shown that atomic layer deposition (ALD) can be used as a technique for depositing alloyed metallic barrier layers at the lower thermal constraints dictated by the use of polymer substrates and still produce continuous and electrically conductive metallic thin films. This has been achieved by lowering ALD processing temperatures to below the glass transition temperatures of polymeric substrate materials used in flexible electronics, including polyimide (PI), polyethylene terephthalate (PET), and polyethylene naphthalate (PEN) in order to maintain their structural integrity. These liner films, processed at temperatures as low as 100°C, are observed to support direct (i.e. seedless) electrochemical deposition of copper, though they failed to effectively act as barriers preventing copper diffusion into the dielectric substrate material. Possible reasons for this behavior and additional studies to address it are also discussed.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Nanoscience. $3 632473
653 $a Atomic layer deposition
653 $a Flexible electronics
653 $a Interconnect technology
655 7 $a Electronic books. $2 local $3 554714
690 $a 0565
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a State University of New York at Albany. $b Nanoscale Science and Engineering-Nanoscale Engineering. $3 1182550
773 0 $t Masters Abstracts International $g 78-04.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10144785 $z click for full text (PQDT)