國立虎尾科技大學 |

Design and application of a wireless torque sensor for CNC milling.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Design and application of a wireless torque sensor for CNC milling./
作者:	Nichols, Jeffrey Scott.
面頁冊數:	1 online resource (99 pages)
附註:	Source: Masters Abstracts International, Volume: 71-10.
Contained By:	Masters Abstracts International71-10.
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781109234930

Design and application of a wireless torque sensor for CNC milling.
Nichols, Jeffrey Scott.

Design and application of a wireless torque sensor for CNC milling. - 1 online resource (99 pages)

Source: Masters Abstracts International, Volume: 71-10.

Thesis (M.S.)--University of New Hampshire, 2009.

Includes bibliographical references

A Smart Machining System for Computer Numerical Control (CNC) Milling continually adjusts the cutting process parameters to optimize for cutting tool life and material removal rate. The system depends on sensors to gather information from the machine during cutting, but commercially available sensors detract from the effectiveness of the cutting system by lowering the system stiffness. This research focuses on the development of the electronics for a Smart Tool Holder (STH) and potential applications such as measurement of mechanical cutting power and suppression of chatter. The STH is a standard milling tool holder modified to hold a torque strain gauge bridge, a thermocouple and a Bluetooth radio transmitter. The STH is meant to overcome some of the different limitations imposed by bed dynamometers, microphones and spindle power sensors without reducing the system stiffness. Comparison of the mechanical power estimates from the STH and a conventional power sensor showed 10% difference.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9781109234930Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Design and application of a wireless torque sensor for CNC milling.
LDR:02212ntm a22003377 4500 001 1145416
005 20240624103643.5
006 m o d
007 cr bn ---uuuuu
008 250605s2009 xx obm 000 0 eng d
020 $a 9781109234930
035 $a (MiAaPQ)AAI1466944
035 $a AAI1466944
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Nichols, Jeffrey Scott. $3 1437612
245 1 0 $a Design and application of a wireless torque sensor for CNC milling.
264 0 $c 2009
300 $a 1 online resource (99 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 71-10.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Jerard, Robert B.
502 $a Thesis (M.S.)--University of New Hampshire, 2009.
504 $a Includes bibliographical references
520 $a A Smart Machining System for Computer Numerical Control (CNC) Milling continually adjusts the cutting process parameters to optimize for cutting tool life and material removal rate. The system depends on sensors to gather information from the machine during cutting, but commercially available sensors detract from the effectiveness of the cutting system by lowering the system stiffness. This research focuses on the development of the electronics for a Smart Tool Holder (STH) and potential applications such as measurement of mechanical cutting power and suppression of chatter. The STH is a standard milling tool holder modified to hold a torque strain gauge bridge, a thermocouple and a Bluetooth radio transmitter. The STH is meant to overcome some of the different limitations imposed by bed dynamometers, microphones and spindle power sensors without reducing the system stiffness. Comparison of the mechanical power estimates from the STH and a conventional power sensor showed 10% difference.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Electrical engineering. $3 596380
655 7 $a Electronic books. $2 local $3 554714
690 $a 0544
690 $a 0548
710 2 $a University of New Hampshire. $3 1437613
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Masters Abstracts International $g 71-10.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1466944 $z click for full text (PQDT)