國立虎尾科技大學 |

Phase Properties of Semiconductor and Transition Metal Materials from Experimental and Computational Principles.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Phase Properties of Semiconductor and Transition Metal Materials from Experimental and Computational Principles./
作者:	Brown, David Lee.
面頁冊數:	1 online resource (171 pages)
附註:	Source: Dissertations Abstracts International, Volume: 82-06, Section: B.
Contained By:	Dissertations Abstracts International82-06B.
標題:	Materials science. -
電子資源:	click for full text (PQDT)
ISBN:	9798698574439

Phase Properties of Semiconductor and Transition Metal Materials from Experimental and Computational Principles.
Brown, David Lee.

Phase Properties of Semiconductor and Transition Metal Materials from Experimental and Computational Principles. - 1 online resource (171 pages)

Source: Dissertations Abstracts International, Volume: 82-06, Section: B.

Thesis (Ph.D.)--University of Florida, 2020.

Includes bibliographical references

For the scaling of Moore's Law, new thin film materials have to accommodate lower contact resistance, and higher strain for improved carrier mobility. These material properties have become the limiting factor for device scaling. In recent years, highly doped Si:P and Si:As films have been studied for providing high dopant activation and source-drain stressors for nMOS devices. The epitaxial tensile strain is believed to be caused by vacancy stabilized Si3P4 and Si3As4 phases. For reduction of contact resistance, a silicide is embedded between the source-drain and metal contact. Titanium disilicide (TiSi2) is a ubiquitous low contact resistance material used for complementary metal oxide devices (CMOS), for its thermal budget, oxidation resistance, and contact defect nature with silicon devices, but the introduction of Ge for compressive strain in pMOS channels causes a ternary reaction with titanium disilicide. It warrants further study of Ti(Si1-xGex)2 for industry applications. In this work, A combination of experiment and computation is used for developing knowledge of these films. Epitaxial strain stability of vacancy stabilized Si3P4, Si3As4, Ge3P4, and Ge3As4 phases is studied from first-principles using electronic-structure calculations at the level of density functional theory. A simulation of electron energy loss spectroscopy (EELS), based on the structural relaxation of the vacancy stabilized Si3P4 phase, is compared to the experimental profile of highly doped Si:P films. Computational methods are also applied to the study of Ti(Si1-xGex)2 allotropes (C40, C49, and C54 structures). The defect formation and lattice stabilities are studied with pure phases of TiSi2 and TiGe2 structures, and TiSi2-TiGe2 pseudobinary thermodynamics is simulated using cluster and Monte Carlo methods. The Ti(Si1-xGex)2 computational study is compared with experimental phase mixing post nanosecond laser anneals. As mentioned before, a fundamental understanding of these films is necessary for the continued scaling of Moore's Law. These studies develop essential knowledge for integrating these films into semiconductor process flow.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798698574439Subjects--Topical Terms:

557839
Materials science.
Subjects--Index Terms:

DFTIndex Terms--Genre/Form:

554714
Electronic books.

Phase Properties of Semiconductor and Transition Metal Materials from Experimental and Computational Principles.
LDR:03454ntm a22003497 4500 001 1145424
005 20240624103646.5
006 m o d
007 cr bn ---uuuuu
008 250605s2020 xx obm 000 0 eng d
020 $a 9798698574439
035 $a (MiAaPQ)AAI27669655
035 $a AAI27669655
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Brown, David Lee. $3 1437625
245 1 0 $a Phase Properties of Semiconductor and Transition Metal Materials from Experimental and Computational Principles.
264 0 $c 2020
300 $a 1 online resource (171 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 82-06, Section: B.
500 $a Advisor: Jones, Kevin S;Phillpot, Simon R.
502 $a Thesis (Ph.D.)--University of Florida, 2020.
504 $a Includes bibliographical references
520 $a For the scaling of Moore's Law, new thin film materials have to accommodate lower contact resistance, and higher strain for improved carrier mobility. These material properties have become the limiting factor for device scaling. In recent years, highly doped Si:P and Si:As films have been studied for providing high dopant activation and source-drain stressors for nMOS devices. The epitaxial tensile strain is believed to be caused by vacancy stabilized Si3P4 and Si3As4 phases. For reduction of contact resistance, a silicide is embedded between the source-drain and metal contact. Titanium disilicide (TiSi2) is a ubiquitous low contact resistance material used for complementary metal oxide devices (CMOS), for its thermal budget, oxidation resistance, and contact defect nature with silicon devices, but the introduction of Ge for compressive strain in pMOS channels causes a ternary reaction with titanium disilicide. It warrants further study of Ti(Si1-xGex)2 for industry applications. In this work, A combination of experiment and computation is used for developing knowledge of these films. Epitaxial strain stability of vacancy stabilized Si3P4, Si3As4, Ge3P4, and Ge3As4 phases is studied from first-principles using electronic-structure calculations at the level of density functional theory. A simulation of electron energy loss spectroscopy (EELS), based on the structural relaxation of the vacancy stabilized Si3P4 phase, is compared to the experimental profile of highly doped Si:P films. Computational methods are also applied to the study of Ti(Si1-xGex)2 allotropes (C40, C49, and C54 structures). The defect formation and lattice stabilities are studied with pure phases of TiSi2 and TiGe2 structures, and TiSi2-TiGe2 pseudobinary thermodynamics is simulated using cluster and Monte Carlo methods. The Ti(Si1-xGex)2 computational study is compared with experimental phase mixing post nanosecond laser anneals. As mentioned before, a fundamental understanding of these films is necessary for the continued scaling of Moore's Law. These studies develop essential knowledge for integrating these films into semiconductor process flow.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Materials science. $3 557839
653 $a DFT
653 $a Intermetallics
653 $a Semiconductor
655 7 $a Electronic books. $2 local $3 554714
690 $a 0794
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of Florida. $b Materials Science and Engineering. $3 1188549
773 0 $t Dissertations Abstracts International $g 82-06B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27669655 $z click for full text (PQDT)