國立虎尾科技大學 |

Modeling, Design, and Fabrication of Spectrally-Selective Mirrors for Photovoltaic Thermal Management.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Modeling, Design, and Fabrication of Spectrally-Selective Mirrors for Photovoltaic Thermal Management./
Author:	Slauch, Ian McClurg.
Description:	1 online resource (172 pages)
Notes:	Source: Dissertations Abstracts International, Volume: 83-01, Section: B.
Contained By:	Dissertations Abstracts International83-01B.
Subject:	Optics. -
Online resource:	click for full text (PQDT)
ISBN:	9798516934902

Modeling, Design, and Fabrication of Spectrally-Selective Mirrors for Photovoltaic Thermal Management.
Slauch, Ian McClurg.

Modeling, Design, and Fabrication of Spectrally-Selective Mirrors for Photovoltaic Thermal Management. - 1 online resource (172 pages)

Source: Dissertations Abstracts International, Volume: 83-01, Section: B.

Thesis (Ph.D.)--University of Minnesota, 2020.

Includes bibliographical references

A typical c-Si photovoltaic module will operate 20-30K above ambient temperature due to waste heat generated as it converts incident sunlight into electrical power. As temperature increases, the conversion efficiency drops by ~0.4%/K, reducing overall power output. Reducing the total amount of waste heat generated during operation would both lower the module operating temperature and improve its efficiency and energy yield.Waste heat is generated in the module in part due to parasitic absorption of sub-bandgap light that does not have enough energy to be useful for power conversion. Sub-bandgap reflection offers a method of preventing parasitic absorption, cooling the module, and increasing its efficiency. In this thesis, a time-independent matrix model is introduced to calculate module energy yield and waste heat generation through parasitic absorption, recombination, and electronic losses. The model considers the spectral and angular dependence of the optical properties of the module including modification by photonic structures, and is used to characterize and optimize the design of aperiodic photonic mirrors which selectively reflect sub-bandgap light from the module and enhance its energy yield. Importantly, these mirrors are designed considering weather and irradiance conditions typical for outdoor fixed-tilt module installations. As a result, it is shown that these mirrors are omnidirectional, achieving the required spectral selectivity regardless of the angle of incidence of sunlight or the geographic location of installation.Low-complexity mirror designs which are simple to fabricate offer the most potential for reducing the cost of energy. These designs are primarily anti-reflection coatings, but also avoid a rise in operating temperature while increasing energy output. Two simple designs are fabricated, integrated into modules, and tested outdoors. The fabricated mirrors have the desired spectral selectivity, and reduce module operating temperature by over 1K.Alternative strategies to reject sub-bandgap light, including reflection from the cell surface or cell rear contact, and backscattering from near the cell are also modeled and compared to result for reflection from the glass. Designing for the glass interface in particular allows maximization of the dual benefit, optical and thermal, of the mirrors.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798516934902Subjects--Topical Terms:

595336
Optics.
Subjects--Index Terms:

ModelingIndex Terms--Genre/Form:

554714
Electronic books.

Modeling, Design, and Fabrication of Spectrally-Selective Mirrors for Photovoltaic Thermal Management.
LDR:03778ntm a22004097 4500 001 1145428
005 20240624103647.5
006 m o d
007 cr bn ---uuuuu
008 250605s2020 xx obm 000 0 eng d
020 $a 9798516934902
035 $a (MiAaPQ)AAI28027184
035 $a AAI28027184
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Slauch, Ian McClurg. $3 1437630
245 1 0 $a Modeling, Design, and Fabrication of Spectrally-Selective Mirrors for Photovoltaic Thermal Management.
264 0 $c 2020
300 $a 1 online resource (172 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 83-01, Section: B.
500 $a Advisor: Ferry, Vivian E.
502 $a Thesis (Ph.D.)--University of Minnesota, 2020.
504 $a Includes bibliographical references
520 $a A typical c-Si photovoltaic module will operate 20-30K above ambient temperature due to waste heat generated as it converts incident sunlight into electrical power. As temperature increases, the conversion efficiency drops by ~0.4%/K, reducing overall power output. Reducing the total amount of waste heat generated during operation would both lower the module operating temperature and improve its efficiency and energy yield.Waste heat is generated in the module in part due to parasitic absorption of sub-bandgap light that does not have enough energy to be useful for power conversion. Sub-bandgap reflection offers a method of preventing parasitic absorption, cooling the module, and increasing its efficiency. In this thesis, a time-independent matrix model is introduced to calculate module energy yield and waste heat generation through parasitic absorption, recombination, and electronic losses. The model considers the spectral and angular dependence of the optical properties of the module including modification by photonic structures, and is used to characterize and optimize the design of aperiodic photonic mirrors which selectively reflect sub-bandgap light from the module and enhance its energy yield. Importantly, these mirrors are designed considering weather and irradiance conditions typical for outdoor fixed-tilt module installations. As a result, it is shown that these mirrors are omnidirectional, achieving the required spectral selectivity regardless of the angle of incidence of sunlight or the geographic location of installation.Low-complexity mirror designs which are simple to fabricate offer the most potential for reducing the cost of energy. These designs are primarily anti-reflection coatings, but also avoid a rise in operating temperature while increasing energy output. Two simple designs are fabricated, integrated into modules, and tested outdoors. The fabricated mirrors have the desired spectral selectivity, and reduce module operating temperature by over 1K.Alternative strategies to reject sub-bandgap light, including reflection from the cell surface or cell rear contact, and backscattering from near the cell are also modeled and compared to result for reflection from the glass. Designing for the glass interface in particular allows maximization of the dual benefit, optical and thermal, of the mirrors.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Optics. $3 595336
650 4 $a Energy. $3 784773
650 4 $a Materials science. $3 557839
653 $a Modeling
653 $a Outdoor testing
653 $a Photonics
653 $a Photovoltaics
653 $a Spectrally-selective
653 $a Thermal management
655 7 $a Electronic books. $2 local $3 554714
690 $a 0752
690 $a 0791
690 $a 0794
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of Minnesota. $b Chemical Engineering. $3 1188196
773 0 $t Dissertations Abstracts International $g 83-01B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28027184 $z click for full text (PQDT)