國立虎尾科技大學 |

Investigation of CoO ATO for Solar Cells and Infrared Sheaths.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Investigation of CoO ATO for Solar Cells and Infrared Sheaths./
Author:	Devisetty Subramanyam, Manopriya.
Description:	1 online resource (80 pages)
Notes:	Source: Dissertations Abstracts International, Volume: 82-11, Section: B.
Contained By:	Dissertations Abstracts International82-11B.
Subject:	Engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9798728269380

Investigation of CoO ATO for Solar Cells and Infrared Sheaths.
Devisetty Subramanyam, Manopriya.

Investigation of CoO ATO for Solar Cells and Infrared Sheaths. - 1 online resource (80 pages)

Source: Dissertations Abstracts International, Volume: 82-11, Section: B.

Thesis (Ph.D.)--University of South Florida, 2021.

Includes bibliographical references

Solar as an energy source is expected to grow fastest from now to 2050. Increasing the efficiency is usually achieved by increasing the short circuit current density (JSC) and/or the fill factor. Improving the efficiency of solar cells will be an ongoing effort.Structurally solar technologies can be classified into two types, wafer-based and thin-film-based. Wafer solar cells have been used in this study. The anti-reflective layer on top of solar cells has been fabricated by a process called electrospinning to tune the solar cells' top surface with the desired thickness and dimensions of the nanofibers. The nanofibers' dimensions, shape, and alignment are tuned by changing the precursor solution's concentration, changing the fabrication parameters such as the 1. Voltage between needle tip and collector plate 2. Distance between needle tip and collector plate and 3. The flow rate of solution in the syringe pump.Physical or structural properties have been studied by using Scanning Electron Microscopy (SEM), Electron Dispersive Microscopy (EDS), Atomic Force Microscopy (AFM). Electrical characterization was carried out using a short circuit current- Voltage (J-V) and multimeter measurements.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798728269380Subjects--Topical Terms:

561152
Engineering.
Subjects--Index Terms:

ElectrospinningIndex Terms--Genre/Form:

554714
Electronic books.

Investigation of CoO ATO for Solar Cells and Infrared Sheaths.
LDR:02555ntm a22003977 4500 001 1145435
005 20240624103649.5
006 m o d
007 cr bn ---uuuuu
008 250605s2021 xx obm 000 0 eng d
020 $a 9798728269380
035 $a (MiAaPQ)AAI28415102
035 $a AAI28415102
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Devisetty Subramanyam, Manopriya. $3 1437644
245 1 0 $a Investigation of CoO ATO for Solar Cells and Infrared Sheaths.
264 0 $c 2021
300 $a 1 online resource (80 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 82-11, Section: B.
500 $a Advisor: Thomas, Sylvia W.
502 $a Thesis (Ph.D.)--University of South Florida, 2021.
504 $a Includes bibliographical references
520 $a Solar as an energy source is expected to grow fastest from now to 2050. Increasing the efficiency is usually achieved by increasing the short circuit current density (JSC) and/or the fill factor. Improving the efficiency of solar cells will be an ongoing effort.Structurally solar technologies can be classified into two types, wafer-based and thin-film-based. Wafer solar cells have been used in this study. The anti-reflective layer on top of solar cells has been fabricated by a process called electrospinning to tune the solar cells' top surface with the desired thickness and dimensions of the nanofibers. The nanofibers' dimensions, shape, and alignment are tuned by changing the precursor solution's concentration, changing the fabrication parameters such as the 1. Voltage between needle tip and collector plate 2. Distance between needle tip and collector plate and 3. The flow rate of solution in the syringe pump.Physical or structural properties have been studied by using Scanning Electron Microscopy (SEM), Electron Dispersive Microscopy (EDS), Atomic Force Microscopy (AFM). Electrical characterization was carried out using a short circuit current- Voltage (J-V) and multimeter measurements.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Engineering. $3 561152
650 4 $a Electrical engineering. $3 596380
650 4 $a Nanotechnology. $3 557660
653 $a Electrospinning
653 $a Infrared shield
653 $a Metal oxides
653 $a Nanofibers
653 $a Solar cell
655 7 $a Electronic books. $2 local $3 554714
690 $a 0537
690 $a 0544
690 $a 0652
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of South Florida. $b Electrical Engineering. $3 845643
773 0 $t Dissertations Abstracts International $g 82-11B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28415102 $z click for full text (PQDT)