國立虎尾科技大學 |

Tool wear monitoring for milling by tracking cutting force model coefficients.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Tool wear monitoring for milling by tracking cutting force model coefficients./
作者:	Cui, Yanjun.
面頁冊數:	1 online resource (99 pages)
附註:	Source: Masters Abstracts International, Volume: 71-01.
Contained By:	Masters Abstracts International71-01.
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781109032550

Tool wear monitoring for milling by tracking cutting force model coefficients.
Cui, Yanjun.

Tool wear monitoring for milling by tracking cutting force model coefficients. - 1 online resource (99 pages)

Source: Masters Abstracts International, Volume: 71-01.

Thesis (M.S.)--University of New Hampshire, 2008.

Includes bibliographical references

This study establishes a way to monitor tool wear in end milling using a tangential force model coefficient method. An experimental investigation of the characteristics of tangential force model coefficients, KTC and KTE, under different cutting conditions is presented. Experimental results indicate that the coefficients are relatively insensitive to the cutting conditions and quite sensitive to tool wear. Several tool wear experiments were performed on AISI 1018 steel. The tool wear was examined using an optical measurement inspection system. The results indicate that KTE increases proportionally with tool flank wear while K TC stays relatively constant until close to the end of tool life. Other possible wear indicators were studied, specifically the radial coefficients (KRC & KRE) and vibration signals. It was found that KRC & KRE are proportional to KTC & KTE, and the vibration signal magnitude is related to flank wear.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9781109032550Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Tool wear monitoring for milling by tracking cutting force model coefficients.
LDR:02134ntm a22003257 4500 001 1147070
005 20240909062206.5
006 m o d
007 cr bn ---uuuuu
008 250605s2008 xx obm 000 0 eng d
020 $a 9781109032550
035 $a (MiAaPQ)AAI1463218
035 $a AAI1463218
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Cui, Yanjun. $3 1472687
245 1 0 $a Tool wear monitoring for milling by tracking cutting force model coefficients.
264 0 $c 2008
300 $a 1 online resource (99 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 71-01.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Jerard, Robert.
502 $a Thesis (M.S.)--University of New Hampshire, 2008.
504 $a Includes bibliographical references
520 $a This study establishes a way to monitor tool wear in end milling using a tangential force model coefficient method. An experimental investigation of the characteristics of tangential force model coefficients, KTC and KTE, under different cutting conditions is presented. Experimental results indicate that the coefficients are relatively insensitive to the cutting conditions and quite sensitive to tool wear. Several tool wear experiments were performed on AISI 1018 steel. The tool wear was examined using an optical measurement inspection system. The results indicate that KTE increases proportionally with tool flank wear while K TC stays relatively constant until close to the end of tool life. Other possible wear indicators were studied, specifically the radial coefficients (KRC & KRE) and vibration signals. It was found that KRC & KRE are proportional to KTC & KTE, and the vibration signal magnitude is related to flank wear.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
710 2 $a University of New Hampshire. $3 1437613
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Masters Abstracts International $g 71-01.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1463218 $z click for full text (PQDT)