國立虎尾科技大學 |

Buckling Behavior of Steel H-Piles Supporting Integral Abutments Bridges (IABs) : = Numerical and Analytical Investigation.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Buckling Behavior of Steel H-Piles Supporting Integral Abutments Bridges (IABs) :/
其他題名:	Numerical and Analytical Investigation.
作者:	Alshawabkeh, Yazan M.
面頁冊數:	1 online resource (289 pages)
附註:	Source: Dissertations Abstracts International, Volume: 85-10, Section: B.
Contained By:	Dissertations Abstracts International85-10B.
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798381974805

Buckling Behavior of Steel H-Piles Supporting Integral Abutments Bridges (IABs) : = Numerical and Analytical Investigation.
Alshawabkeh, Yazan M.

Buckling Behavior of Steel H-Piles Supporting Integral Abutments Bridges (IABs) :Numerical and Analytical Investigation. - 1 online resource (289 pages)

Source: Dissertations Abstracts International, Volume: 85-10, Section: B.

Thesis (Ph.D.)--University of Illinois at Chicago, 2023.

Includes bibliographical references

Integral abutment bridges (IABs) have been gaining wide popularity in the United States and neighboring countries due to the rapid increase in maintenance costs associated with conventional bridges. IABs are jointless bridges where the superstructure is monolithically connected to the abutment wall without expansion joints or bearing devices. The design of IABs focuses on encasing the problematic locations within the abutment diaphragm, preventing structural elements degradation, and promoting long-term serviceability. The elimination of expansion joints in IABs allows the thermally induced lateral demand in the superstructure to be transferred to the supporting piles. Despite the well-established benefits of IABs, there is a lack of standardized national guidelines governing their design and construction. Instead, individual states in the US have developed their own design limitations based on engineering judgment and performance of previously constructed bridges. Piles in IABs are susceptible to fatigue due to bridge cyclic movement caused by temperature fluctuations. This research aims to quantify the behavior of steel H-piles supporting IABs through numerical and analytical approaches. Nonlinear finite element models (NLFEM) were calibrated and validated against available experimental data. Subsequently, a total of 30 models were established to examine the effect of various parameters (pile size, pile orientation, pile material yield strength, pile equivalent cantilever length, and axial compressive load) on piles supporting jointless bridges subjected to a combined axial load and lateral cyclic displacement amplitude. The analysis revealed that local buckling was the dominant failure mode for all specimens. Furthermore, this research reiterates the various parameters and assesses their influence through a statistical regression analysis to develop an empirical formula for calculating the lateral buckling capacity. The developed equation correlates material properties and section geometries with lateral loading capacity. The rationality of the developed formula was examined and tested with existing experimental data and its validity was supported by a high coefficient of determination and a low coefficient of variance.Moreover, extending bridge length limits can reduce the construction and maintenance costs for many structures that cannot currently be built using this structural system. The absence of a defined allowable pile ductility in jointless bridges creates a critical gap in determining the maximum permissible safe bridge length. The study further introduces a design aid procedure and offers practical tools in the form of a flowchart to aid engineers in establishing the maximum safe bridge length. The validity of the developed design aid procedure was examined and tested with existing experimental and numerical results. It was determined that the design aid procedure reasonably estimates the buckling response of a pile. Based on displacement buckling capacities of HP sections, length limits for IABs were estimated and compared with existing studies and the current practice of the US Department of Transportations.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798381974805Subjects--Topical Terms:

557493
Mechanical engineering.
Subjects--Index Terms:

Nonlinear finite element modelsIndex Terms--Genre/Form:

554714
Electronic books.

Buckling Behavior of Steel H-Piles Supporting Integral Abutments Bridges (IABs) : = Numerical and Analytical Investigation.
LDR:04713ntm a22004217 4500 001 1147740
005 20240916065456.5
006 m o d
007 cr bn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798381974805
035 $a (MiAaPQ)AAI31229316
035 $a (MiAaPQ)0799vireo75Alshawabkeh
035 $a AAI31229316
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Alshawabkeh, Yazan M. $3 1473544
245 1 0 $a Buckling Behavior of Steel H-Piles Supporting Integral Abutments Bridges (IABs) : $b Numerical and Analytical Investigation.
264 0 $c 2023
300 $a 1 online resource (289 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-10, Section: B.
500 $a Advisor: Issa, Mohsen.
502 $a Thesis (Ph.D.)--University of Illinois at Chicago, 2023.
504 $a Includes bibliographical references
520 $a Integral abutment bridges (IABs) have been gaining wide popularity in the United States and neighboring countries due to the rapid increase in maintenance costs associated with conventional bridges. IABs are jointless bridges where the superstructure is monolithically connected to the abutment wall without expansion joints or bearing devices. The design of IABs focuses on encasing the problematic locations within the abutment diaphragm, preventing structural elements degradation, and promoting long-term serviceability. The elimination of expansion joints in IABs allows the thermally induced lateral demand in the superstructure to be transferred to the supporting piles. Despite the well-established benefits of IABs, there is a lack of standardized national guidelines governing their design and construction. Instead, individual states in the US have developed their own design limitations based on engineering judgment and performance of previously constructed bridges. Piles in IABs are susceptible to fatigue due to bridge cyclic movement caused by temperature fluctuations. This research aims to quantify the behavior of steel H-piles supporting IABs through numerical and analytical approaches. Nonlinear finite element models (NLFEM) were calibrated and validated against available experimental data. Subsequently, a total of 30 models were established to examine the effect of various parameters (pile size, pile orientation, pile material yield strength, pile equivalent cantilever length, and axial compressive load) on piles supporting jointless bridges subjected to a combined axial load and lateral cyclic displacement amplitude. The analysis revealed that local buckling was the dominant failure mode for all specimens. Furthermore, this research reiterates the various parameters and assesses their influence through a statistical regression analysis to develop an empirical formula for calculating the lateral buckling capacity. The developed equation correlates material properties and section geometries with lateral loading capacity. The rationality of the developed formula was examined and tested with existing experimental data and its validity was supported by a high coefficient of determination and a low coefficient of variance.Moreover, extending bridge length limits can reduce the construction and maintenance costs for many structures that cannot currently be built using this structural system. The absence of a defined allowable pile ductility in jointless bridges creates a critical gap in determining the maximum permissible safe bridge length. The study further introduces a design aid procedure and offers practical tools in the form of a flowchart to aid engineers in establishing the maximum safe bridge length. The validity of the developed design aid procedure was examined and tested with existing experimental and numerical results. It was determined that the design aid procedure reasonably estimates the buckling response of a pile. Based on displacement buckling capacities of HP sections, length limits for IABs were estimated and compared with existing studies and the current practice of the US Department of Transportations.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Architectural engineering. $3 1180400
650 4 $a Statistics. $3 556824
653 $a Nonlinear finite element models
653 $a Integral abutment bridges
653 $a Structural system
653 $a Lateral loading capacity
653 $a Jointless bridges
655 7 $a Electronic books. $2 local $3 554714
690 $a 0543
690 $a 0548
690 $a 0462
690 $a 0463
710 2 $a University of Illinois at Chicago. $b Civil, Material and Environmental Engineering. $3 1473545
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Dissertations Abstracts International $g 85-10B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=31229316 $z click for full text (PQDT)