國立虎尾科技大學 |

Shake Table Testing and Model Validation of a Seismic Isolation System for Lightweight Structures.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Shake Table Testing and Model Validation of a Seismic Isolation System for Lightweight Structures./
作者:	Lopez Restrepo, Sebastian.
面頁冊數:	1 online resource (919 pages)
附註:	Source: Dissertations Abstracts International, Volume: 85-12, Section: B.
Contained By:	Dissertations Abstracts International85-12B.
標題:	Architectural engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798382831640

Shake Table Testing and Model Validation of a Seismic Isolation System for Lightweight Structures.
Lopez Restrepo, Sebastian.

Shake Table Testing and Model Validation of a Seismic Isolation System for Lightweight Structures. - 1 online resource (919 pages)

Source: Dissertations Abstracts International, Volume: 85-12, Section: B.

Thesis (Ph.D.)--State University of New York at Buffalo, 2024.

Includes bibliographical references

Seismic base isolation is employed worldwide to protect a wide variety of structures. However, the implementation of this type of seismic protection system in houses and lightweight structures is limited, with the exception of Japan, where nearly 5000 houses are base-isolated with highly engineered isolation systems. These systems have not been adopted in growing economies with high seismic hazard, such as Turkey or Colombia, due to their cost, the difficulties in locally fabricating their components, and their incompatibility with local construction practices. Although efforts have been made to find alternative isolation devices for lightweight structures with similar features to those employed in Japan, the proposed solutions are not reliable, and their limitations are only mitigated when employing fabrication techniques and materials corresponding to well-established isolation techniques, such as friction pendulum type bearings, which are not low-cost isolation systems for lightweight structures.Previous studies on low-cost isolation systems for lightweight structures showed that isolation devices with rolling elements are better suited for low-cost isolation systems than those based on friction. A low-cost isolation system based on a deformable rolling bearing developed at the University at Buffalo has simple components that can be manufactured anywhere, has a large displacement capacity, and features a fail-safe mechanism. The bearing is composed of one flat and one concave plate and a rubber rolling ball, either made solid or with a steel core. This dissertation expanded the research on the deformable rolling bearing by testing it on a shake table using half-length scale versions of prototype houses and small bridges in three-directional seismic excitation. The results showed that the deformable rolling bearings provide significant seismic protection of lightweight structures against strong ground motions, which in the testing reached a maximum peak ground velocity of 1.2m/s and a peak ground acceleration of 4g in the horizontal direction and up to 1g in the vertical direction. The isolation system was particularly effective in the horizontal direction, whereas it did not provide any vertical isolation. The tests included cases of extreme response which included vertical impact within the bearing's components and uplift of the isolated structure.A model of behavior of the isolator was developed to capture a very complex behavior observed in the testing. The experimental results were used to validate the analytical model. Comparisons of analytical and experimental results showed that the analytical model predicts the horizontal isolator displacements and the accelerations of the structure with acceptable accuracy.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798382831640Subjects--Topical Terms:

1180400
Architectural engineering.
Subjects--Index Terms:

Deformable rolling bearingsIndex Terms--Genre/Form:

554714
Electronic books.

Shake Table Testing and Model Validation of a Seismic Isolation System for Lightweight Structures.
LDR:04252ntm a22004097 4500 001 1147763
005 20240916065503.5
006 m o d
007 cr bn ---uuuuu
008 250605s2024 xx obm 000 0 eng d
020 $a 9798382831640
035 $a (MiAaPQ)AAI31298730
035 $a AAI31298730
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Lopez Restrepo, Sebastian. $3 1473573
245 1 0 $a Shake Table Testing and Model Validation of a Seismic Isolation System for Lightweight Structures.
264 0 $c 2024
300 $a 1 online resource (919 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-12, Section: B.
500 $a Advisor: Constantinou, Michael C.
502 $a Thesis (Ph.D.)--State University of New York at Buffalo, 2024.
504 $a Includes bibliographical references
520 $a Seismic base isolation is employed worldwide to protect a wide variety of structures. However, the implementation of this type of seismic protection system in houses and lightweight structures is limited, with the exception of Japan, where nearly 5000 houses are base-isolated with highly engineered isolation systems. These systems have not been adopted in growing economies with high seismic hazard, such as Turkey or Colombia, due to their cost, the difficulties in locally fabricating their components, and their incompatibility with local construction practices. Although efforts have been made to find alternative isolation devices for lightweight structures with similar features to those employed in Japan, the proposed solutions are not reliable, and their limitations are only mitigated when employing fabrication techniques and materials corresponding to well-established isolation techniques, such as friction pendulum type bearings, which are not low-cost isolation systems for lightweight structures.Previous studies on low-cost isolation systems for lightweight structures showed that isolation devices with rolling elements are better suited for low-cost isolation systems than those based on friction. A low-cost isolation system based on a deformable rolling bearing developed at the University at Buffalo has simple components that can be manufactured anywhere, has a large displacement capacity, and features a fail-safe mechanism. The bearing is composed of one flat and one concave plate and a rubber rolling ball, either made solid or with a steel core. This dissertation expanded the research on the deformable rolling bearing by testing it on a shake table using half-length scale versions of prototype houses and small bridges in three-directional seismic excitation. The results showed that the deformable rolling bearings provide significant seismic protection of lightweight structures against strong ground motions, which in the testing reached a maximum peak ground velocity of 1.2m/s and a peak ground acceleration of 4g in the horizontal direction and up to 1g in the vertical direction. The isolation system was particularly effective in the horizontal direction, whereas it did not provide any vertical isolation. The tests included cases of extreme response which included vertical impact within the bearing's components and uplift of the isolated structure.A model of behavior of the isolator was developed to capture a very complex behavior observed in the testing. The experimental results were used to validate the analytical model. Comparisons of analytical and experimental results showed that the analytical model predicts the horizontal isolator displacements and the accelerations of the structure with acceptable accuracy.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Architectural engineering. $3 1180400
650 4 $a Environmental engineering. $3 557376
653 $a Deformable rolling bearings
653 $a Half-length scale testing
653 $a Lightweight structures
653 $a Rolling motion
653 $a Seismic isolation
653 $a Shake table testing
655 7 $a Electronic books. $2 local $3 554714
690 $a 0543
690 $a 0775
690 $a 0462
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a State University of New York at Buffalo. $b Civil, Structural and Environmental Engineering. $3 1465683
773 0 $t Dissertations Abstracts International $g 85-12B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=31298730 $z click for full text (PQDT)