國立虎尾科技大學 |

Carbon Nanotube Containing Electrodes for Organic Electronics Applications.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Carbon Nanotube Containing Electrodes for Organic Electronics Applications./
作者:	Hellstrom, Sondra Lynn.
面頁冊數:	1 online resource (198 pages)
附註:	Source: Dissertations Abstracts International, Volume: 82-04, Section: B.
Contained By:	Dissertations Abstracts International82-04B.
標題:	Nanotechnology. -
電子資源:	click for full text (PQDT)
ISBN:	9798672116198

Carbon Nanotube Containing Electrodes for Organic Electronics Applications.
Hellstrom, Sondra Lynn.

Carbon Nanotube Containing Electrodes for Organic Electronics Applications. - 1 online resource (198 pages)

Source: Dissertations Abstracts International, Volume: 82-04, Section: B.

Thesis (Ph.D.)--Stanford University, 2012.

Includes bibliographical references

Flexible transparent electrodes are critical for use in large-area or flexible touch screens, solar cells, and flat panel displays. An ideal material should be inexpensive, nontoxic, flexible, solution processable, thin and uniform, with a sheet resistance of less than 50 ohms per square at 90% transmission. No current material satisfies this set of specifications. One promising candidate is the carbon nanotube (CNT) network. There are two key challenges in making CNT electrodes. Firstly, in dispersion, van der Waals forces drive CNT aggregation into bundles, which are less efficient conductors than single tubes. Secondly, transport through a CNT network is typically dominated by large intertube resistances.The work in this thesis develops and studies composite materials addressing each of these challenges. In the first part of this thesis, we develop a method for making four-probe conductivity measurements on CNT bundles in networks, and compare these with data taken via electrostatic force microscopy. We confirm that bundles are less efficient at charge transport than single tubes, and that intertube rather than interbundle junctions limit transport in bundled networks. We then explore the use of poly-3-hexylthiophene (P3HT), as a dispersing agent for CNTs. While P3HT debundles CNTs, improves film morphology considerably and facilitates processing immensely, we find that too much P3HT can still substantially reduce the overall conductivity of the films.To improve this, and to address the tube junction resistance problem in general, the second part of the thesis focuses on p-type doping of CNTs, which increases free carrier concentration and lowers or eliminates intertube Schottky barriers. Known CNT dopants, including nitric acid and thionyl chloride, are toxic, corrosive, and/or ephemeral. We develop a new mild, stable and competitive process to dope CNT networks with molybdenum oxide, and explore the doping mechanism. We then compare this process with doping by thionyl chloride and by tetrafluorotetracyano-p-quinodimethane, a known mild molecular dopant. Lastly, to affirm the utility of these CNT composites as electrodes for organic semiconductor devices, we optimize methods to pattern them with high fidelity on dielectric surfaces and show that they can drive organic thin film transistors, in some cases better than can typical Au bottom contact electrodes.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798672116198Subjects--Topical Terms:

557660
Nanotechnology.
Subjects--Index Terms:

Carbon nanotube networkIndex Terms--Genre/Form:

554714
Electronic books.

Carbon Nanotube Containing Electrodes for Organic Electronics Applications.
LDR:03770ntm a22003737 4500 001 1147808
005 20240916075404.5
006 m o d
007 cr bn ---uuuuu
008 250605s2012 xx obm 000 0 eng d
020 $a 9798672116198
035 $a (MiAaPQ)AAI28169226
035 $a (MiAaPQ)STANFORDst952cy3498
035 $a AAI28169226
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Hellstrom, Sondra Lynn. $3 1473625
245 1 0 $a Carbon Nanotube Containing Electrodes for Organic Electronics Applications.
264 0 $c 2012
300 $a 1 online resource (198 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 82-04, Section: B.
500 $a Advisor: Bao, Zhenan; Fisher, Ian R.;McGehee, Michael.
502 $a Thesis (Ph.D.)--Stanford University, 2012.
504 $a Includes bibliographical references
520 $a Flexible transparent electrodes are critical for use in large-area or flexible touch screens, solar cells, and flat panel displays. An ideal material should be inexpensive, nontoxic, flexible, solution processable, thin and uniform, with a sheet resistance of less than 50 ohms per square at 90% transmission. No current material satisfies this set of specifications. One promising candidate is the carbon nanotube (CNT) network. There are two key challenges in making CNT electrodes. Firstly, in dispersion, van der Waals forces drive CNT aggregation into bundles, which are less efficient conductors than single tubes. Secondly, transport through a CNT network is typically dominated by large intertube resistances.The work in this thesis develops and studies composite materials addressing each of these challenges. In the first part of this thesis, we develop a method for making four-probe conductivity measurements on CNT bundles in networks, and compare these with data taken via electrostatic force microscopy. We confirm that bundles are less efficient at charge transport than single tubes, and that intertube rather than interbundle junctions limit transport in bundled networks. We then explore the use of poly-3-hexylthiophene (P3HT), as a dispersing agent for CNTs. While P3HT debundles CNTs, improves film morphology considerably and facilitates processing immensely, we find that too much P3HT can still substantially reduce the overall conductivity of the films.To improve this, and to address the tube junction resistance problem in general, the second part of the thesis focuses on p-type doping of CNTs, which increases free carrier concentration and lowers or eliminates intertube Schottky barriers. Known CNT dopants, including nitric acid and thionyl chloride, are toxic, corrosive, and/or ephemeral. We develop a new mild, stable and competitive process to dope CNT networks with molybdenum oxide, and explore the doping mechanism. We then compare this process with doping by thionyl chloride and by tetrafluorotetracyano-p-quinodimethane, a known mild molecular dopant. Lastly, to affirm the utility of these CNT composites as electrodes for organic semiconductor devices, we optimize methods to pattern them with high fidelity on dielectric surfaces and show that they can drive organic thin film transistors, in some cases better than can typical Au bottom contact electrodes.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Nanotechnology. $3 557660
650 4 $a Applied physics. $3 1181953
653 $a Carbon nanotube network
653 $a Tube junction resistance
653 $a CNT dopants
655 7 $a Electronic books. $2 local $3 554714
690 $a 0652
690 $a 0215
710 2 $a Stanford University. $3 1184533
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Dissertations Abstracts International $g 82-04B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28169226 $z click for full text (PQDT)