國立虎尾科技大學 |

MEMS-Based Purification and Sensing Technologies for Sustainable Water Management.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	MEMS-Based Purification and Sensing Technologies for Sustainable Water Management./
Author:	Zhou, Peng.
Description:	1 online resource (116 pages)
Notes:	Source: Dissertations Abstracts International, Volume: 85-02, Section: B.
Contained By:	Dissertations Abstracts International85-02B.
Subject:	Mechanical engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9798379965655

MEMS-Based Purification and Sensing Technologies for Sustainable Water Management.
Zhou, Peng.

MEMS-Based Purification and Sensing Technologies for Sustainable Water Management. - 1 online resource (116 pages)

Source: Dissertations Abstracts International, Volume: 85-02, Section: B.

Thesis (Ph.D.)--University of Minnesota, 2023.

Includes bibliographical references

The management of water resources is a pressing global challenge. This research aims to address the issues of water pollution and scarcity by proposing micro-electromechanical systems (MEMS) based solutions for water purification and sensing. In particular, this research presents a new photoelectrocatalytic water purification system, an efficient valveless micropump, and a sensitive heavy metal ion sensor based on MEMS technologies, envisioning for a sensor-based closed-loop control water treatment platform.The photocatalytic degradation of organic matter by titanium dioxide was initially used to remove pollutants from water. A uniform and durable coating of titanium dioxide was successfully applied to various surfaces. These coated surfaces demonstrated high degradation efficiency and long-term stability in degrading organic matter in water. To further improve the photocatalytic degradation efficiency of titanium dioxide, graphene was introduced to form titanium dioxide/graphene nanocomposites.A new photoelectrocatalytic water purification system was developed by combining photocatalysis and electrochemistry. This scheme can be used to simultaneously remove both organic compounds and inorganic heavy metal ions from water. In this system, the working and counter electrodes are switched compared to traditional photoelectrocatalysis systems, with the metal or carbon electrode as the working electrode and the microchannels with photocatalyst serving as the counter electrode. A negative bias potential is applied to the working electrode to reduce the heavy metal ions, and the current flow through the circuit helps transfer the photo-excited electrons from the counter electrode (photocatalyst) to the working electrode. The inorganic heavy metal ions are thus reduced on the working electrodes while the photocatalytic degradation of organic pollutants on the counter electrode is enhanced.Next, a micropump suitable for the water treatment and detection platforms was researched and developed. Valveless fluidic diode micropumps without moving parts are considered suitable for water sensor systems due to their simple structure and rapid mixing. In the design, topology optimization is used to design two-dimensional, fixed-geometry, fluidic diodes of high diodicity, which is the ratio of pressure drops of forward to reverse flows. One of the fluidic diodes, of the Tesla type, shows a diodicity of over five. The numerical simulation was applied to simplify the structures, and the two-dimensional geometry was converted into three-dimensional model for micropumps. Three-dimensional and unsteady numerical analyses of micropump were conducted for pumps with the two diode designs. The experiments conducted with designed diodes showed reliable repeatability and precise control of flow, indicating positive prospects for potential applications.To achieve the envisioned closed-loop control water treatment platform, a highly sensitive low-cost sensor is essential. An electrochemical microfluidic sensor was developed for the high-sensitivity and low-cost detection of heavy metal ions in water. This sensor utilizes a glass carbon/graphene electrode synthesized through layer-by-layer self-assembly and subsequent pyrolysis. The electrode exhibited low overpotential, enabling detection of almost any heavy metal ions in aqueous solutions, and the incorporation of graphene resulted in a high sensitivity. To enhance mass transfer and sensitivity, a valveless micropump was integrated with the electrode, achieving two orders of higher sensitivity than those of measurements with a stationary solution and a detection limit as low as 20 ppt for lead and 100 ppt for cadmium. The developed sensor was employed to simultaneously detect lead and cadmium in water, investigating the mutual influence of heavy metal ions in electrochemistry. A neuron network model was adopted for data analysis.In summary, this study presents a comprehensive approach to addressing the worldwide challenge of sustainable water resource management through the removal of pollutants and the detection of water pollutants. The closed-looped control water treatment platform, based on high-performance sensors, micropumps, and advanced photoelectrocatalysis technologies, provides an efficient and cost-effective solution to water scarcity and pollution. This platform offers promising prospects for the development of effective water management systems, which can contribute to the improvement of global water resources management and enhance the quality of life for people around the world.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798379965655Subjects--Topical Terms:

557493
Mechanical engineering.
Subjects--Index Terms:

ElectrochemistryIndex Terms--Genre/Form:

554714
Electronic books.

MEMS-Based Purification and Sensing Technologies for Sustainable Water Management.
LDR:05941ntm a22003857 4500 001 1147975
005 20240916065953.5
006 m o d
007 cr bn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798379965655
035 $a (MiAaPQ)AAI30528808
035 $a AAI30528808
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Zhou, Peng. $3 1180738
245 1 0 $a MEMS-Based Purification and Sensing Technologies for Sustainable Water Management.
264 0 $c 2023
300 $a 1 online resource (116 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-02, Section: B.
500 $a Advisor: Cui, Tianhong.
502 $a Thesis (Ph.D.)--University of Minnesota, 2023.
504 $a Includes bibliographical references
520 $a The management of water resources is a pressing global challenge. This research aims to address the issues of water pollution and scarcity by proposing micro-electromechanical systems (MEMS) based solutions for water purification and sensing. In particular, this research presents a new photoelectrocatalytic water purification system, an efficient valveless micropump, and a sensitive heavy metal ion sensor based on MEMS technologies, envisioning for a sensor-based closed-loop control water treatment platform.The photocatalytic degradation of organic matter by titanium dioxide was initially used to remove pollutants from water. A uniform and durable coating of titanium dioxide was successfully applied to various surfaces. These coated surfaces demonstrated high degradation efficiency and long-term stability in degrading organic matter in water. To further improve the photocatalytic degradation efficiency of titanium dioxide, graphene was introduced to form titanium dioxide/graphene nanocomposites.A new photoelectrocatalytic water purification system was developed by combining photocatalysis and electrochemistry. This scheme can be used to simultaneously remove both organic compounds and inorganic heavy metal ions from water. In this system, the working and counter electrodes are switched compared to traditional photoelectrocatalysis systems, with the metal or carbon electrode as the working electrode and the microchannels with photocatalyst serving as the counter electrode. A negative bias potential is applied to the working electrode to reduce the heavy metal ions, and the current flow through the circuit helps transfer the photo-excited electrons from the counter electrode (photocatalyst) to the working electrode. The inorganic heavy metal ions are thus reduced on the working electrodes while the photocatalytic degradation of organic pollutants on the counter electrode is enhanced.Next, a micropump suitable for the water treatment and detection platforms was researched and developed. Valveless fluidic diode micropumps without moving parts are considered suitable for water sensor systems due to their simple structure and rapid mixing. In the design, topology optimization is used to design two-dimensional, fixed-geometry, fluidic diodes of high diodicity, which is the ratio of pressure drops of forward to reverse flows. One of the fluidic diodes, of the Tesla type, shows a diodicity of over five. The numerical simulation was applied to simplify the structures, and the two-dimensional geometry was converted into three-dimensional model for micropumps. Three-dimensional and unsteady numerical analyses of micropump were conducted for pumps with the two diode designs. The experiments conducted with designed diodes showed reliable repeatability and precise control of flow, indicating positive prospects for potential applications.To achieve the envisioned closed-loop control water treatment platform, a highly sensitive low-cost sensor is essential. An electrochemical microfluidic sensor was developed for the high-sensitivity and low-cost detection of heavy metal ions in water. This sensor utilizes a glass carbon/graphene electrode synthesized through layer-by-layer self-assembly and subsequent pyrolysis. The electrode exhibited low overpotential, enabling detection of almost any heavy metal ions in aqueous solutions, and the incorporation of graphene resulted in a high sensitivity. To enhance mass transfer and sensitivity, a valveless micropump was integrated with the electrode, achieving two orders of higher sensitivity than those of measurements with a stationary solution and a detection limit as low as 20 ppt for lead and 100 ppt for cadmium. The developed sensor was employed to simultaneously detect lead and cadmium in water, investigating the mutual influence of heavy metal ions in electrochemistry. A neuron network model was adopted for data analysis.In summary, this study presents a comprehensive approach to addressing the worldwide challenge of sustainable water resource management through the removal of pollutants and the detection of water pollutants. The closed-looped control water treatment platform, based on high-performance sensors, micropumps, and advanced photoelectrocatalysis technologies, provides an efficient and cost-effective solution to water scarcity and pollution. This platform offers promising prospects for the development of effective water management systems, which can contribute to the improvement of global water resources management and enhance the quality of life for people around the world.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Physical chemistry. $3 1148725
650 4 $a Water resources management. $3 1178858
653 $a Electrochemistry
653 $a Water resources
653 $a Water pollution
653 $a Nanocomposites
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0595
690 $a 0494
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of Minnesota. $b Mechanical Engineering. $3 845514
773 0 $t Dissertations Abstracts International $g 85-02B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30528808 $z click for full text (PQDT)