國立虎尾科技大學 |

Additive Manufacturing of Binary and Ternary Shape Memory Polyester Blends as a Pathway Towards High Entropy Polymer Systems.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Additive Manufacturing of Binary and Ternary Shape Memory Polyester Blends as a Pathway Towards High Entropy Polymer Systems./
作者:	Lares Carrillo, Luis Eduardo.
面頁冊數:	1 online resource (51 pages)
附註:	Source: Masters Abstracts International, Volume: 84-12.
Contained By:	Masters Abstracts International84-12.
標題:	Materials science. -
電子資源:	click for full text (PQDT)
ISBN:	9798379697327

Additive Manufacturing of Binary and Ternary Shape Memory Polyester Blends as a Pathway Towards High Entropy Polymer Systems.
Lares Carrillo, Luis Eduardo.

Additive Manufacturing of Binary and Ternary Shape Memory Polyester Blends as a Pathway Towards High Entropy Polymer Systems. - 1 online resource (51 pages)

Source: Masters Abstracts International, Volume: 84-12.

Thesis (M.S.)--The University of Texas at El Paso, 2023.

Includes bibliographical references

The purpose of this work is to incorporate additive manufacturing technology (AM) in the development of shape memory polymer blends. Two polyester blend systems were developed, one binary and the other ternary. The binary blend consisted of polycaprolactone (PCL) and thermoplastic polyurethane (TPU) and the ternary blend was composed of PCL, TPU and polylactic acid (PLA). Test specimens were fabricated with the AM technology of fused filament fabrication (FFF). Several tests were performed to characterize the mechanical and shape memory properties. A dynamic mechanical analyzer (DMA) was first used to establish the shape recovery temperature. Tensile testing was carried out to determine the ultimate tensile strength (UTS) an % elongation (%El) values. Tensile testing was also used to determine the critical shape memory [properties, namely the shape recovery ratio (Rr) and shape fixation ratio (Rf). A key aspect of this work also involves the emerging materials science premise of high entropy materials and demonstrates how ternary blends can open the way for high entropy shape memory polymers. The shape memory performance of the two blend systems is also compared. This work also explores the self-healing capability of TPU/PCL and TPU/PCL/PLA blend systems. Additionally, the effect of raster pattern on the mechanical and shape memory properties is also made. Scanning electron microscopy (SEM) was used to perform fracture surface analysis and a difference between material type and raster pattern was also made.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798379697327Subjects--Topical Terms:

557839
Materials science.
Subjects--Index Terms:

Additive manufacturingIndex Terms--Genre/Form:

554714
Electronic books.

Additive Manufacturing of Binary and Ternary Shape Memory Polyester Blends as a Pathway Towards High Entropy Polymer Systems.
LDR:02958ntm a22003977 4500 001 1148162
005 20240916070016.5
006 m o d
007 cr bn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798379697327
035 $a (MiAaPQ)AAI30521754
035 $a AAI30521754
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Lares Carrillo, Luis Eduardo. $3 1474078
245 1 0 $a Additive Manufacturing of Binary and Ternary Shape Memory Polyester Blends as a Pathway Towards High Entropy Polymer Systems.
264 0 $c 2023
300 $a 1 online resource (51 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 84-12.
500 $a Advisor: Roberson, David.
502 $a Thesis (M.S.)--The University of Texas at El Paso, 2023.
504 $a Includes bibliographical references
520 $a The purpose of this work is to incorporate additive manufacturing technology (AM) in the development of shape memory polymer blends. Two polyester blend systems were developed, one binary and the other ternary. The binary blend consisted of polycaprolactone (PCL) and thermoplastic polyurethane (TPU) and the ternary blend was composed of PCL, TPU and polylactic acid (PLA). Test specimens were fabricated with the AM technology of fused filament fabrication (FFF). Several tests were performed to characterize the mechanical and shape memory properties. A dynamic mechanical analyzer (DMA) was first used to establish the shape recovery temperature. Tensile testing was carried out to determine the ultimate tensile strength (UTS) an % elongation (%El) values. Tensile testing was also used to determine the critical shape memory [properties, namely the shape recovery ratio (Rr) and shape fixation ratio (Rf). A key aspect of this work also involves the emerging materials science premise of high entropy materials and demonstrates how ternary blends can open the way for high entropy shape memory polymers. The shape memory performance of the two blend systems is also compared. This work also explores the self-healing capability of TPU/PCL and TPU/PCL/PLA blend systems. Additionally, the effect of raster pattern on the mechanical and shape memory properties is also made. Scanning electron microscopy (SEM) was used to perform fracture surface analysis and a difference between material type and raster pattern was also made.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Materials science. $3 557839
650 4 $a Polymer chemistry. $3 1182163
650 4 $a Engineering. $3 561152
653 $a Additive manufacturing
653 $a Polymer blends
653 $a Polyester blends
653 $a Entropy materials
653 $a Scanning electron microscopy
655 7 $a Electronic books. $2 local $3 554714
690 $a 0537
690 $a 0794
690 $a 0495
710 2 $a The University of Texas at El Paso. $b Metal And Mat'l Eng.. $3 1474079
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Masters Abstracts International $g 84-12.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30521754 $z click for full text (PQDT)