國立虎尾科技大學 |

RF/Analog Spatial Equalization for Integrated Digital MIMO Receivers.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	RF/Analog Spatial Equalization for Integrated Digital MIMO Receivers./
作者:	Zhang, Linxiao.
面頁冊數:	1 online resource (149 pages)
附註:	Source: Dissertations Abstracts International, Volume: 79-05, Section: B.
Contained By:	Dissertations Abstracts International79-05B.
標題:	Engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9780355396577

RF/Analog Spatial Equalization for Integrated Digital MIMO Receivers.
Zhang, Linxiao.

RF/Analog Spatial Equalization for Integrated Digital MIMO Receivers. - 1 online resource (149 pages)

Source: Dissertations Abstracts International, Volume: 79-05, Section: B.

Thesis (Ph.D.)--Columbia University, 2017.

Includes bibliographical references

A multiple-input-multiple-output, or MIMO, receiver receives multiple data streams in the same frequency band at the same time, significantly improving spectral efficiency. It has to preserve all the antenna aperture information and use it to deliver as many data streams as the antenna count. As the number of antennas increases, implementing a MIMO receiver system in the analog domain becomes difficult. A digital MIMO receiver architecture that digitizes all the antenna inputs on the element level offers multiple advantages. Digital MIMO signal processing is flexing and powerful. Complex space-time array processing is supported and so is digital array calibration. Therefore, the digital MIMO receiver architecture has become the most promising architecture for future massive MIMO systems.However, the digital MIMO receiver architecture has a disadvantage, namely that the spatial selectivity feature is missing in the RF/analog domain. At the target frequency band, multiple spatial signals can arrive at the antenna array at different power levels. Conventional spectral filtering is ineffective at in-band frequency so all the spatial signals have to co-exist in all the receiver elements and the following analog-to-digital converters (A/Ds). The instantaneous dynamic range required for these RF/analog and mixed-signal circuits will be limited by the strongest spatial signal on the upper bound, and the weakest spatial signal on the lower bound. A high instantaneous dynamic range requirement directly translates to high power consumption and high cost. Therefore, the recovery of spatial selectivity in the RF/analog domain is necessary. The first thrust toward recovering RF/analog spatial selectivity in a digital MIMO receiver is the scalable spatial notch suppression technique. Knowing the direction of a strong spatial blocker, a spatial notch, instead of beams, can be synthesized to the blocker direction to filter it out. This means that all the analog baseband outputs will show high conversion gains to signals from all directions but one, namely the blocker direction. In this way, high sensitivity is preserved in most directions to receiver multiple weak spatial signals simultaneously, which will be digitized, and separated in the digital domain. In the blocker direction, a low conversion gain filters the blocker out, preventing it from demanding high dynamic range for all of the RF/analog circuits and the A/Ds.In order to synthesize the scalable spatial notch, a spatial notch filter (SNF) is designed to provide lower input impedance in the blocker direction and high impedance in other directions. Using this spatially modulated impedance to load a current mode receiver leads to spatially modulated conversion gain. A transparent RF front-end translates this impedance to the antenna interface to achieve spatial notch suppression right at the antennas. A feedforward spatial notch canceler (FF SNC) uses the available isolated blocker information to improve spatial suppression ratio. The spatial notch suppression is scalable through a baseband node, allowing the tiling of multiple ICs on the same PCB for larger scale MIMO systems.A prototype receiver array was implemented with a 65nm CMOS process. Experimental results showed 32dB steerable spatial notch suppression, more than 19db of suppression inside the notch direction across all frequencies. In-band output-referred IP3 was improved from -10dBV to +24dBV, from outside to inside the notch direction, and IIP3 was also improved from +11dBm to +18dBm. Single-element equivalent double-sideband noise figure (NFDSB,eq) was 2.2 to 4.6dB across the 0.1 to 1.7GHz operating frequency range, also showing an improvement compared to other multi-antenna receivers at similar frequency ranges. A second thrust is an RF/analog arbitrary spatial filtering receiver. Instead of filtering out strong spatial blockers, a more general and robust way to recover spatial selectivity is to impose an arbitrary spatial response that adaptively equalizes the power levels of all the spatial signals. In this way, all the spatial signals should have the same power level when reaching the A/Ds, allowing the use of low-power A/Ds with low dynamic ranges, which are essential for the realization of the digital massive MIMO solution. Such an arbitrary spatial filtering response requires the ability to synthesize multiple spatial notches that can be independently steered, the depth of the notches free adjusted.In addition, a few performance metrics need to be improved based on the first work. Spatial suppression ratio was limited by the lack of magnitude control in the first work. In-band in-notch linearity performance was limited by the use of voltage mode gyrators that requires a band-limiting high-impedance node, which also limits spatial suppression bandwidth. Also, the antenna array dimensions scale inversely with operating frequency. So pushing the receiver array to work at higher frequency is also desired.Toward these goals, a 65nm CMOS prototype receiver array was implemented. Wideband current-mode receiver front-ends that consist of inverter-based LNTAs and passive mixers can work up to 3.1GHz. A baseband current-mode beamformer can synthesize virtual grounds at the output nodes in the target notch directions, providing not only an arbitrary spatial response but also an baseband input impedance that is also spatially modulated, allowing spatial filtering at the LNTA output nodes. Current mode operation avoids the use of band-limiting high impedance nodes for strong spatial signals, leading to superior linearity and wideband spatial suppression. This 4-element prototype measured more than 50dB of spatial suppression ratios with single-notch settings across all measured directions. Up to three notches can be synthesized, each of which can be independently steered and its depth freely adjusted. An in-band OIP3 of +34dBV was measured, 10dB higher than the first work, due to the current mode operation. A 20dB suppression bandwidth of 320MHz, or equivalently 64% was measured, more than 20x improvement than the first work, also due to the current mode operation.On a separate note, an ultra-wideband LNTA was also designed for an RF channelizing receiver work. This two-stage LNTA makes use of a gm-boosted current mirror structure to harness the linearity advantage of a current mirror, the low-noise input matching of the feedback structure, the high transconductance gain of a two-stage structure and an ultra-wideband input matching advantage of a gyrator. The implemented 65nm CMOS prototype is fully integrated, and provides 242mS peak transconductance gain over 0.6-9.6GHz operating frequency range. It achieves 4.5dB of NF and +6.5dBm of IIP3. In summary, RF/analog spatial selectivity can be recovered in innovative methods to relax the dynamic range requirement for all the RF/analog circuits together with the following A/Ds in a digital MIMO receiver. The scalable spatial notch suppression technique and the arbitrary spatial filtering technique allow the use of low-power A/Ds, which are essential for truly massive MIMO systems with manageable power consumption.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9780355396577Subjects--Topical Terms:

561152
Engineering.
Subjects--Index Terms:

Integrated digital MIMO receiversIndex Terms--Genre/Form:

554714
Electronic books.

RF/Analog Spatial Equalization for Integrated Digital MIMO Receivers.
LDR:08569ntm a22003737 4500 001 1148436
005 20240924101510.5
006 m o d
007 cr bn ---uuuuu
008 250605s2017 xx obm 000 0 eng d
020 $a 9780355396577
035 $a (MiAaPQ)AAI10274904
035 $a (MiAaPQ)columbia:13951
035 $a AAI10274904
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Zhang, Linxiao. $3 1474396
245 1 0 $a RF/Analog Spatial Equalization for Integrated Digital MIMO Receivers.
264 0 $c 2017
300 $a 1 online resource (149 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 79-05, Section: B.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Krishnaswamy, Harish.
502 $a Thesis (Ph.D.)--Columbia University, 2017.
504 $a Includes bibliographical references
520 $a A multiple-input-multiple-output, or MIMO, receiver receives multiple data streams in the same frequency band at the same time, significantly improving spectral efficiency. It has to preserve all the antenna aperture information and use it to deliver as many data streams as the antenna count. As the number of antennas increases, implementing a MIMO receiver system in the analog domain becomes difficult. A digital MIMO receiver architecture that digitizes all the antenna inputs on the element level offers multiple advantages. Digital MIMO signal processing is flexing and powerful. Complex space-time array processing is supported and so is digital array calibration. Therefore, the digital MIMO receiver architecture has become the most promising architecture for future massive MIMO systems.However, the digital MIMO receiver architecture has a disadvantage, namely that the spatial selectivity feature is missing in the RF/analog domain. At the target frequency band, multiple spatial signals can arrive at the antenna array at different power levels. Conventional spectral filtering is ineffective at in-band frequency so all the spatial signals have to co-exist in all the receiver elements and the following analog-to-digital converters (A/Ds). The instantaneous dynamic range required for these RF/analog and mixed-signal circuits will be limited by the strongest spatial signal on the upper bound, and the weakest spatial signal on the lower bound. A high instantaneous dynamic range requirement directly translates to high power consumption and high cost. Therefore, the recovery of spatial selectivity in the RF/analog domain is necessary. The first thrust toward recovering RF/analog spatial selectivity in a digital MIMO receiver is the scalable spatial notch suppression technique. Knowing the direction of a strong spatial blocker, a spatial notch, instead of beams, can be synthesized to the blocker direction to filter it out. This means that all the analog baseband outputs will show high conversion gains to signals from all directions but one, namely the blocker direction. In this way, high sensitivity is preserved in most directions to receiver multiple weak spatial signals simultaneously, which will be digitized, and separated in the digital domain. In the blocker direction, a low conversion gain filters the blocker out, preventing it from demanding high dynamic range for all of the RF/analog circuits and the A/Ds.In order to synthesize the scalable spatial notch, a spatial notch filter (SNF) is designed to provide lower input impedance in the blocker direction and high impedance in other directions. Using this spatially modulated impedance to load a current mode receiver leads to spatially modulated conversion gain. A transparent RF front-end translates this impedance to the antenna interface to achieve spatial notch suppression right at the antennas. A feedforward spatial notch canceler (FF SNC) uses the available isolated blocker information to improve spatial suppression ratio. The spatial notch suppression is scalable through a baseband node, allowing the tiling of multiple ICs on the same PCB for larger scale MIMO systems.A prototype receiver array was implemented with a 65nm CMOS process. Experimental results showed 32dB steerable spatial notch suppression, more than 19db of suppression inside the notch direction across all frequencies. In-band output-referred IP3 was improved from -10dBV to +24dBV, from outside to inside the notch direction, and IIP3 was also improved from +11dBm to +18dBm. Single-element equivalent double-sideband noise figure (NFDSB,eq) was 2.2 to 4.6dB across the 0.1 to 1.7GHz operating frequency range, also showing an improvement compared to other multi-antenna receivers at similar frequency ranges. A second thrust is an RF/analog arbitrary spatial filtering receiver. Instead of filtering out strong spatial blockers, a more general and robust way to recover spatial selectivity is to impose an arbitrary spatial response that adaptively equalizes the power levels of all the spatial signals. In this way, all the spatial signals should have the same power level when reaching the A/Ds, allowing the use of low-power A/Ds with low dynamic ranges, which are essential for the realization of the digital massive MIMO solution. Such an arbitrary spatial filtering response requires the ability to synthesize multiple spatial notches that can be independently steered, the depth of the notches free adjusted.In addition, a few performance metrics need to be improved based on the first work. Spatial suppression ratio was limited by the lack of magnitude control in the first work. In-band in-notch linearity performance was limited by the use of voltage mode gyrators that requires a band-limiting high-impedance node, which also limits spatial suppression bandwidth. Also, the antenna array dimensions scale inversely with operating frequency. So pushing the receiver array to work at higher frequency is also desired.Toward these goals, a 65nm CMOS prototype receiver array was implemented. Wideband current-mode receiver front-ends that consist of inverter-based LNTAs and passive mixers can work up to 3.1GHz. A baseband current-mode beamformer can synthesize virtual grounds at the output nodes in the target notch directions, providing not only an arbitrary spatial response but also an baseband input impedance that is also spatially modulated, allowing spatial filtering at the LNTA output nodes. Current mode operation avoids the use of band-limiting high impedance nodes for strong spatial signals, leading to superior linearity and wideband spatial suppression. This 4-element prototype measured more than 50dB of spatial suppression ratios with single-notch settings across all measured directions. Up to three notches can be synthesized, each of which can be independently steered and its depth freely adjusted. An in-band OIP3 of +34dBV was measured, 10dB higher than the first work, due to the current mode operation. A 20dB suppression bandwidth of 320MHz, or equivalently 64% was measured, more than 20x improvement than the first work, also due to the current mode operation.On a separate note, an ultra-wideband LNTA was also designed for an RF channelizing receiver work. This two-stage LNTA makes use of a gm-boosted current mirror structure to harness the linearity advantage of a current mirror, the low-noise input matching of the feedback structure, the high transconductance gain of a two-stage structure and an ultra-wideband input matching advantage of a gyrator. The implemented 65nm CMOS prototype is fully integrated, and provides 242mS peak transconductance gain over 0.6-9.6GHz operating frequency range. It achieves 4.5dB of NF and +6.5dBm of IIP3. In summary, RF/analog spatial selectivity can be recovered in innovative methods to relax the dynamic range requirement for all the RF/analog circuits together with the following A/Ds in a digital MIMO receiver. The scalable spatial notch suppression technique and the arbitrary spatial filtering technique allow the use of low-power A/Ds, which are essential for truly massive MIMO systems with manageable power consumption.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Engineering. $3 561152
650 4 $a Electrical engineering. $3 596380
653 $a Integrated digital MIMO receivers
653 $a RF/Analog spatial equalization
655 7 $a Electronic books. $2 local $3 554714
690 $a 0537
690 $a 0544
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Columbia University. $b Electrical Engineering. $3 1179181
773 0 $t Dissertations Abstracts International $g 79-05B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10274904 $z click for full text (PQDT)