國立虎尾科技大學 |

Manufacturing and Characterization of a Microfluidic Notched-Ring Contact Lens for Intraocular Pressure Monitoring Using a 2D To 3D Transformation Process.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Manufacturing and Characterization of a Microfluidic Notched-Ring Contact Lens for Intraocular Pressure Monitoring Using a 2D To 3D Transformation Process./
作者:	Krstic, Aleksa.
面頁冊數:	1 online resource (89 pages)
附註:	Source: Masters Abstracts International, Volume: 85-04.
Contained By:	Masters Abstracts International85-04.
標題:	Polymer chemistry. -
電子資源:	click for full text (PQDT)
ISBN:	9798380473323

Manufacturing and Characterization of a Microfluidic Notched-Ring Contact Lens for Intraocular Pressure Monitoring Using a 2D To 3D Transformation Process.
Krstic, Aleksa.

Manufacturing and Characterization of a Microfluidic Notched-Ring Contact Lens for Intraocular Pressure Monitoring Using a 2D To 3D Transformation Process. - 1 online resource (89 pages)

Source: Masters Abstracts International, Volume: 85-04.

Thesis (M.A.Sc.)--Queen's University (Canada), 2023.

Includes bibliographical references

Continuous Interocular pressure (IOP) monitoring is a revolutionary method for measuring intraocular pressure in the human eye. It is especially useful for diagnosing early-stage glaucoma and offers many benefits for monitoring the disease when compared to widely used invasive methods. IOP monitoring can be achieved with the use of microfluidic contact lenses which are deformable non-invasive wearable contact lenses that facilitate continuous IOP monitoring and data collection over the span of multiple hours. These devices show much promise for the future of self-administered Glaucoma detection and management in a cost-effective manner.This work presents three unique, low-cost microfluidic contact lenses based on a notchedring design that can effectively measure IOP. The primary design features a novel method for supporting the structural integrity of wide microfluidic channels using micropillars to support the upper channel ceiling. The manufacturing and fabrication of the presented designs acts as a proof-of-concept for a 2D to 3D transformation manufacturing process for microfluidic contact lenses using a notched-ring design, remedying multiple design challenges and flaws in the process. Further, this work provides a precise process for consistently manufacturing microfluidic IOP lenses with consistent thickness and feature resolution by utilizing a molding process and Polydimethylsiloxane polymer. Testing and validation of the proposed designs was accomplished using a pressurized membrane polymer "rubber eye" setup. Physical test results were paired with multiphysics simulation for further design verification and analysis. The main objectives of this work were accomplished. Three designs were found to display an increase in indicating fluid displacement with an increase in IOP. The 2D to 3D notched ring conversion method was found to be an effective method for consistent microfluidic contact lens sensor manufacturing, remedying previous design challenges and improving manufacturing consistency.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798380473323Subjects--Topical Terms:

1182163
Polymer chemistry.
Index Terms--Genre/Form:

554714
Electronic books.

Manufacturing and Characterization of a Microfluidic Notched-Ring Contact Lens for Intraocular Pressure Monitoring Using a 2D To 3D Transformation Process.
LDR:03450ntm a22004097 4500 001 1149068
005 20240930130039.5
006 m o d
007 cr bn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798380473323
035 $a (MiAaPQ)AAI30616958
035 $a (MiAaPQ)QueensUCan_197431765
035 $a AAI30616958
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Krstic, Aleksa. $3 1475207
245 1 0 $a Manufacturing and Characterization of a Microfluidic Notched-Ring Contact Lens for Intraocular Pressure Monitoring Using a 2D To 3D Transformation Process.
264 0 $c 2023
300 $a 1 online resource (89 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 85-04.
500 $a Advisor: Lai, Yongjun.
502 $a Thesis (M.A.Sc.)--Queen's University (Canada), 2023.
504 $a Includes bibliographical references
520 $a Continuous Interocular pressure (IOP) monitoring is a revolutionary method for measuring intraocular pressure in the human eye. It is especially useful for diagnosing early-stage glaucoma and offers many benefits for monitoring the disease when compared to widely used invasive methods. IOP monitoring can be achieved with the use of microfluidic contact lenses which are deformable non-invasive wearable contact lenses that facilitate continuous IOP monitoring and data collection over the span of multiple hours. These devices show much promise for the future of self-administered Glaucoma detection and management in a cost-effective manner.This work presents three unique, low-cost microfluidic contact lenses based on a notchedring design that can effectively measure IOP. The primary design features a novel method for supporting the structural integrity of wide microfluidic channels using micropillars to support the upper channel ceiling. The manufacturing and fabrication of the presented designs acts as a proof-of-concept for a 2D to 3D transformation manufacturing process for microfluidic contact lenses using a notched-ring design, remedying multiple design challenges and flaws in the process. Further, this work provides a precise process for consistently manufacturing microfluidic IOP lenses with consistent thickness and feature resolution by utilizing a molding process and Polydimethylsiloxane polymer. Testing and validation of the proposed designs was accomplished using a pressurized membrane polymer "rubber eye" setup. Physical test results were paired with multiphysics simulation for further design verification and analysis. The main objectives of this work were accomplished. Three designs were found to display an increase in indicating fluid displacement with an increase in IOP. The 2D to 3D notched ring conversion method was found to be an effective method for consistent microfluidic contact lens sensor manufacturing, remedying previous design challenges and improving manufacturing consistency.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Polymer chemistry. $3 1182163
650 4 $a Pharmacology. $3 583819
650 4 $a Ophthalmology. $3 644487
650 4 $a Mechanical engineering. $3 557493
650 4 $a Industrial engineering. $3 679492
650 4 $a Energy. $3 784773
650 4 $a Electrical engineering. $3 596380
650 4 $a Hydrogels. $3 934121
650 4 $a Glaucoma. $3 681254
650 4 $a Deformation. $3 1328788
650 4 $a Biosensors. $3 555917
650 4 $a Glucose. $3 999791
650 4 $a Sensors. $3 1003702
650 4 $a Permeability. $3 582006
650 4 $a Drug delivery systems. $3 581921
650 4 $a Polymers. $3 561233
650 4 $a Contact lenses. $3 789384
650 4 $a Energy consumption. $3 571871
650 4 $a Aluminum. $3 1025495
650 4 $a Cornea. $3 1064852
650 4 $a Food. $3 581281
650 4 $a Software. $2 gtt $3 574116
650 4 $a Rubber. $3 636455
650 4 $a Microelectromechanical systems. $3 559134
650 4 $a Physiology. $3 673386
650 4 $a Biocompatibility. $3 596826
655 7 $a Electronic books. $2 local $3 554714
690 $a 0719
690 $a 0544
690 $a 0791
690 $a 0546
690 $a 0548
690 $a 0381
690 $a 0419
690 $a 0495
710 2 $a Queen's University (Canada). $3 1148613
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Masters Abstracts International $g 85-04.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30616958 $z click for full text (PQDT)