國立虎尾科技大學 |

Development of an Optical Imaging Platform for Assessment of Tooth Color and Whiteness.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Development of an Optical Imaging Platform for Assessment of Tooth Color and Whiteness./
作者:	Minchala Remache, Meagan.
面頁冊數:	1 online resource (71 pages)
附註:	Source: Masters Abstracts International, Volume: 84-12.
Contained By:	Masters Abstracts International84-12.
標題:	Medical imaging. -
電子資源:	click for full text (PQDT)
ISBN:	9798379595920

Development of an Optical Imaging Platform for Assessment of Tooth Color and Whiteness.
Minchala Remache, Meagan.

Development of an Optical Imaging Platform for Assessment of Tooth Color and Whiteness. - 1 online resource (71 pages)

Source: Masters Abstracts International, Volume: 84-12.

Thesis (M.S.)--Rutgers The State University of New Jersey, School of Graduate Studies, 2023.

Includes bibliographical references

The two most common devices to measure tooth color in dental applications are shade guides (a visual comparison) and colorimeters (a quantitative comparison). Shade guides are subjective, difficult to convert into a useful digital file type, and metrics cannot be easily converted to a standard color scale to quantify whiteness. Colorimeters can provide quantitative color measurements, but usually only at a single location on a sample. Digital color cameras offer the potential to achieve quantification of sample color mapped across an entire field of view but typically provide only three overlapping red / green / blue spectral channels. This project aims to create an optical imaging system using a new polarization-sensitive color camera to perform color and whiteness index measurements using the CIELAB color space. Values obtained from the camera setup were compared to measurements obtained from a commercial colorimeter (Optishade). The system was calibrated and validated using standard test objects (ColorChecker CG1 and VITA teeth), then tested using six bovine teeth which underwent staining and whitening. After the bovine teeth were stained by immersion in coffee, there was a mean decrease in whiteness of 3.80% and mean change in L*a*b* color of 3.16% (n = 6). After whitening with a 30% hydrogen peroxide solution, there was a mean increase in whiteness of 5.98% and mean change in L*a*b* color of 4.30%, relative to tooth color after the staining experiment. The polarization camera system gave a mean relative error of 4.91% in L* value, 30.95% in a* value, and 8.21% in b* value when comparing the staining experiment results to the Optishade values. The polarization camera system gave mean relative errors of 7.57% in L* value, 20.37% in a* value, and 6.67% in b* value when comparing the post-whitening color to the Optishade values. In summary, the methods developed in this project provide a foundation for using a new polarization-sensitive color camera for quantitative spatial mapping of tooth color and whiteness. Future studies may focus on decreasing errors in the measured L*a*b* values and using the camera's different polarization images, which can carry information about light returning from superficial and deep layers of the tooth.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798379595920Subjects--Topical Terms:

1180167
Medical imaging.
Subjects--Index Terms:

Optical imagingIndex Terms--Genre/Form:

554714
Electronic books.

Development of an Optical Imaging Platform for Assessment of Tooth Color and Whiteness.
LDR:03671ntm a22003977 4500 001 1149299
005 20241015112504.5
006 m o d
007 cr bn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798379595920
035 $a (MiAaPQ)AAI30316844
035 $a AAI30316844
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Minchala Remache, Meagan. $3 1475474
245 1 0 $a Development of an Optical Imaging Platform for Assessment of Tooth Color and Whiteness.
264 0 $c 2023
300 $a 1 online resource (71 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 84-12.
500 $a Advisor: Pierce, Mark C.
502 $a Thesis (M.S.)--Rutgers The State University of New Jersey, School of Graduate Studies, 2023.
504 $a Includes bibliographical references
520 $a The two most common devices to measure tooth color in dental applications are shade guides (a visual comparison) and colorimeters (a quantitative comparison). Shade guides are subjective, difficult to convert into a useful digital file type, and metrics cannot be easily converted to a standard color scale to quantify whiteness. Colorimeters can provide quantitative color measurements, but usually only at a single location on a sample. Digital color cameras offer the potential to achieve quantification of sample color mapped across an entire field of view but typically provide only three overlapping red / green / blue spectral channels. This project aims to create an optical imaging system using a new polarization-sensitive color camera to perform color and whiteness index measurements using the CIELAB color space. Values obtained from the camera setup were compared to measurements obtained from a commercial colorimeter (Optishade). The system was calibrated and validated using standard test objects (ColorChecker CG1 and VITA teeth), then tested using six bovine teeth which underwent staining and whitening. After the bovine teeth were stained by immersion in coffee, there was a mean decrease in whiteness of 3.80% and mean change in L*a*b* color of 3.16% (n = 6). After whitening with a 30% hydrogen peroxide solution, there was a mean increase in whiteness of 5.98% and mean change in L*a*b* color of 4.30%, relative to tooth color after the staining experiment. The polarization camera system gave a mean relative error of 4.91% in L* value, 30.95% in a* value, and 8.21% in b* value when comparing the staining experiment results to the Optishade values. The polarization camera system gave mean relative errors of 7.57% in L* value, 20.37% in a* value, and 6.67% in b* value when comparing the post-whitening color to the Optishade values. In summary, the methods developed in this project provide a foundation for using a new polarization-sensitive color camera for quantitative spatial mapping of tooth color and whiteness. Future studies may focus on decreasing errors in the measured L*a*b* values and using the camera's different polarization images, which can carry information about light returning from superficial and deep layers of the tooth.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Medical imaging. $3 1180167
650 4 $a Dentistry. $3 674038
650 4 $a Biomedical engineering. $3 588770
653 $a Optical imaging
653 $a Tooth color
653 $a Shade guides
653 $a Digital color cameras
653 $a Bovine teeth
655 7 $a Electronic books. $2 local $3 554714
690 $a 0541
690 $a 0574
690 $a 0567
710 2 $a Rutgers The State University of New Jersey, School of Graduate Studies. $b Biomedical Engineering. $3 1475475
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Masters Abstracts International $g 84-12.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30316844 $z click for full text (PQDT)