國立虎尾科技大學 |

Desalination Pervaporation Using Modified Zwitterionic Poly(Arylene Ether Sulfone) Membranes.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Desalination Pervaporation Using Modified Zwitterionic Poly(Arylene Ether Sulfone) Membranes./
作者:	Martin, Adam.
面頁冊數:	1 online resource (24 pages)
附註:	Source: Masters Abstracts International, Volume: 83-12.
Contained By:	Masters Abstracts International83-12.
標題:	Polymer chemistry. -
電子資源:	click for full text (PQDT)
ISBN:	9798819317822

Desalination Pervaporation Using Modified Zwitterionic Poly(Arylene Ether Sulfone) Membranes.
Martin, Adam.

Desalination Pervaporation Using Modified Zwitterionic Poly(Arylene Ether Sulfone) Membranes. - 1 online resource (24 pages)

Source: Masters Abstracts International, Volume: 83-12.

Thesis (M.S.)--Arizona State University, 2022.

Includes bibliographical references

Freshwater is becoming more and more scarce, and the need to make use of other water resources is critical. Although processes such as Sea Water Reverse Osmosis (SWRO) exist, these processes are not without drawbacks, such as a brine with a high salt concentration being a byproduct of SWRO. Pervaporation is a potential solution to this problem, however the membranes used in these processes are prone to fouling and the high salt conditions are difficult to work around. Incorporating zwitterions into the polymeric backbone of these membranes has proven to be an effective way to increase fouling resistance. In this work, sulfobetaine - based zwitterions were incorporated into the backbone of poly(arylene ether sulfone) to synthesize sulfobetaine - modified poly(arylene ether sulfone) (SB-PAES) membranes, which were then tested in a cross-flow pervaporation apparatus to analyze salt rejection. SB-PAES membranes were cast with two different methods to create a consistent casting protocol. It was determined that casting solutions with a lower weight percent in petri dishes was optimal, but still needs more exploration. The SB-PAES membranes were tested with feed solutions of pure water and salt solutions with concentrations of 1 g/L, 5 g/L, and 10 g/L. Both 50% and 25% charge SB-PAES membranes were tested. The 50% charge membranes showed good flux and salt rejection over 99.9% for a 10 g/L feed solution, while the 25% charge membranes showed less flux and salt rejection around 85% for a feed solution of 10 g/L.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798819317822Subjects--Topical Terms:

1182163
Polymer chemistry.
Subjects--Index Terms:

DesalinationIndex Terms--Genre/Form:

554714
Electronic books.

Desalination Pervaporation Using Modified Zwitterionic Poly(Arylene Ether Sulfone) Membranes.
LDR:02896ntm a22003977 4500 001 1149480
005 20241022112108.5
006 m o d
007 cr bn ---uuuuu
008 250605s2022 xx obm 000 0 eng d
020 $a 9798819317822
035 $a (MiAaPQ)AAI29166433
035 $a AAI29166433
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Martin, Adam. $e editor. $3 1318612
245 1 0 $a Desalination Pervaporation Using Modified Zwitterionic Poly(Arylene Ether Sulfone) Membranes.
264 0 $c 2022
300 $a 1 online resource (24 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 83-12.
500 $a Advisor: Green, Matthew D.
502 $a Thesis (M.S.)--Arizona State University, 2022.
504 $a Includes bibliographical references
520 $a Freshwater is becoming more and more scarce, and the need to make use of other water resources is critical. Although processes such as Sea Water Reverse Osmosis (SWRO) exist, these processes are not without drawbacks, such as a brine with a high salt concentration being a byproduct of SWRO. Pervaporation is a potential solution to this problem, however the membranes used in these processes are prone to fouling and the high salt conditions are difficult to work around. Incorporating zwitterions into the polymeric backbone of these membranes has proven to be an effective way to increase fouling resistance. In this work, sulfobetaine - based zwitterions were incorporated into the backbone of poly(arylene ether sulfone) to synthesize sulfobetaine - modified poly(arylene ether sulfone) (SB-PAES) membranes, which were then tested in a cross-flow pervaporation apparatus to analyze salt rejection. SB-PAES membranes were cast with two different methods to create a consistent casting protocol. It was determined that casting solutions with a lower weight percent in petri dishes was optimal, but still needs more exploration. The SB-PAES membranes were tested with feed solutions of pure water and salt solutions with concentrations of 1 g/L, 5 g/L, and 10 g/L. Both 50% and 25% charge SB-PAES membranes were tested. The 50% charge membranes showed good flux and salt rejection over 99.9% for a 10 g/L feed solution, while the 25% charge membranes showed less flux and salt rejection around 85% for a feed solution of 10 g/L.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Polymer chemistry. $3 1182163
650 4 $a Chemical engineering. $3 555952
653 $a Desalination
653 $a Pervaporation
653 $a Polysulfone membranes
653 $a SB-PAES
653 $a Water purification
653 $a Zwitterions
655 7 $a Electronic books. $2 local $3 554714
690 $a 0542
690 $a 0495
710 2 $a Arizona State University. $b Chemical Engineering. $3 1182447
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Masters Abstracts International $g 83-12.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=29166433 $z click for full text (PQDT)