國立虎尾科技大學 |

Additive Manufacturing Processes for Structural and Hybrid Architectured Materials.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Additive Manufacturing Processes for Structural and Hybrid Architectured Materials./
作者:	Xu, Zhenpeng.
面頁冊數:	1 online resource (182 pages)
附註:	Source: Dissertations Abstracts International, Volume: 84-09, Section: B.
Contained By:	Dissertations Abstracts International84-09B.
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798377639688

Additive Manufacturing Processes for Structural and Hybrid Architectured Materials.
Xu, Zhenpeng.

Additive Manufacturing Processes for Structural and Hybrid Architectured Materials. - 1 online resource (182 pages)

Source: Dissertations Abstracts International, Volume: 84-09, Section: B.

Thesis (Ph.D.)--University of California, Los Angeles, 2023.

Includes bibliographical references

Architectured materials have gained significant attention in recent years due to their unique properties and potential applications, such as lightweight structural materials and functional devices. Projection stereolithography is a promising additive manufacturing technique for fabricating these materials with precisely designed geometries. However, several key processing factors have limited the development of this technique. One of the primary challenges of using projection stereolithography is the limited control over printing material properties, especially resin viscosity. High-viscosity resins may not flow easily or could potentially result in the loss of fine details in the final print. Another challenge is structure printability, as the geometrical arrangement of building blocks to create the desired microstructure may lead to overhanging features or unsupported regions. Such design complexities can result in deformation, detachment, or even collapse of the printed structure. Size scalability is another challenge in projection stereolithography, which is inherently restricted by the pixels of the light engine.This work focuses on addressing the aforementioned challenges by developing new additive manufacturing processes. Specifically, an extendable multi-material projection stereolithography system integrated with a tape-casting method is developed to create architectured lattice materials made of carbon fiber reinforced polymer composites. This system improves material processability by allowing for precise control of resin fluidity. Then, a light-based approach capable of printing arbitrary micro-architectures with a large array of internally suspended features is presented. This method eliminates the need for manual removal of internal supports, which improves structure printability. It also enables the creation of multi-functional metamaterials with a range of designed properties, including wide bandgaps for elastic waves and switchable wave transmissions. Lastly, a large-scale high-resolution scanning projection stereolithography process integrated with an optical scanning system is presented. This system provides the ability to print unprecedented large-scale parts of 50 cm with a minimal feature size of 50 μm, which enables the fabrication of architectured materials with features spanning over four orders of magnitude for many applications. Overall, these proposed approaches address several critical challenges in the projection stereolithography process and have a profound impact not only on the industry but also on other research works.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798377639688Subjects--Topical Terms:

557493
Mechanical engineering.
Subjects--Index Terms:

3D printingIndex Terms--Genre/Form:

554714
Electronic books.

Additive Manufacturing Processes for Structural and Hybrid Architectured Materials.
LDR:04103ntm a22004337 4500 001 1149596
005 20241022112552.5
006 m o d
007 cr bn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798377639688
035 $a (MiAaPQ)AAI30313998
035 $a AAI30313998
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Xu, Zhenpeng. $3 1475897
245 1 0 $a Additive Manufacturing Processes for Structural and Hybrid Architectured Materials.
264 0 $c 2023
300 $a 1 online resource (182 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 84-09, Section: B.
500 $a Advisor: Bauchy, Mathieu;Zheng, Xiaoyu.
502 $a Thesis (Ph.D.)--University of California, Los Angeles, 2023.
504 $a Includes bibliographical references
520 $a Architectured materials have gained significant attention in recent years due to their unique properties and potential applications, such as lightweight structural materials and functional devices. Projection stereolithography is a promising additive manufacturing technique for fabricating these materials with precisely designed geometries. However, several key processing factors have limited the development of this technique. One of the primary challenges of using projection stereolithography is the limited control over printing material properties, especially resin viscosity. High-viscosity resins may not flow easily or could potentially result in the loss of fine details in the final print. Another challenge is structure printability, as the geometrical arrangement of building blocks to create the desired microstructure may lead to overhanging features or unsupported regions. Such design complexities can result in deformation, detachment, or even collapse of the printed structure. Size scalability is another challenge in projection stereolithography, which is inherently restricted by the pixels of the light engine.This work focuses on addressing the aforementioned challenges by developing new additive manufacturing processes. Specifically, an extendable multi-material projection stereolithography system integrated with a tape-casting method is developed to create architectured lattice materials made of carbon fiber reinforced polymer composites. This system improves material processability by allowing for precise control of resin fluidity. Then, a light-based approach capable of printing arbitrary micro-architectures with a large array of internally suspended features is presented. This method eliminates the need for manual removal of internal supports, which improves structure printability. It also enables the creation of multi-functional metamaterials with a range of designed properties, including wide bandgaps for elastic waves and switchable wave transmissions. Lastly, a large-scale high-resolution scanning projection stereolithography process integrated with an optical scanning system is presented. This system provides the ability to print unprecedented large-scale parts of 50 cm with a minimal feature size of 50 μm, which enables the fabrication of architectured materials with features spanning over four orders of magnitude for many applications. Overall, these proposed approaches address several critical challenges in the projection stereolithography process and have a profound impact not only on the industry but also on other research works.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Materials science. $3 557839
650 4 $a Civil engineering. $3 561339
650 4 $a Architectural engineering. $3 1180400
653 $a 3D printing
653 $a Additive manufacturing
653 $a Architectured materials
653 $a Carbon fiber
653 $a Microstructure
653 $a Stereolithography
653 $a Reinforced polymers
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0794
690 $a 0543
690 $a 0462
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of California, Los Angeles. $b Civil Engineering 0300. $3 1187075
773 0 $t Dissertations Abstracts International $g 84-09B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30313998 $z click for full text (PQDT)