國立虎尾科技大學 |

Optimization of Optoelectronic Properties and Morphologies of Organic and Hybrid Perovskite Crystalline Thin Films.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Optimization of Optoelectronic Properties and Morphologies of Organic and Hybrid Perovskite Crystalline Thin Films./
作者:	Zhelyaskova, Vesta V.
面頁冊數:	1 online resource (145 pages)
附註:	Source: Dissertations Abstracts International, Volume: 85-03, Section: B.
Contained By:	Dissertations Abstracts International85-03B.
標題:	Electrical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798380167666

Optimization of Optoelectronic Properties and Morphologies of Organic and Hybrid Perovskite Crystalline Thin Films.
Zhelyaskova, Vesta V.

Optimization of Optoelectronic Properties and Morphologies of Organic and Hybrid Perovskite Crystalline Thin Films. - 1 online resource (145 pages)

Source: Dissertations Abstracts International, Volume: 85-03, Section: B.

Thesis (Ph.D.)--University of Colorado at Boulder, 2023.

Includes bibliographical references

Organic electronic materials (OEMs) and hybrid halide perovskites (HHPs) are two classes of materials that show overwhelming potential towards a more sustainable and innovative future. In this work, we optimize crystalline thin film growth of organic small molecules p-terphenyl and C60 using a polymer-assisted crystallization solution growth method. The resulting enhanced crystalline ordering, mm-long crystallites, and low crystal formation energy are exciting steps toward potential integration of these crystalline thin films into electronic devices. HHPs are the leading emerging photovoltaic materials that could be combined with or ultimately replace silicon. Like OEMs, the performance of HHPs depends on the quality (morphology and defect density) of the material, which can be improved by tuning processing conditions or through the incorporation of additives. This work explores the latter, where a novel photoluminescence (PL) statistical analysis method is used to evaluate the effects of four different additives incorporated using three different methods in a Sn-based perovskite. The additive matrix introduced in this work can serve as a guide to additive and incorporation method choice for Sn-based perovskite material improvements. Incorporating amine-thiocyanate (AT) additives into the bulk showed the strongest optoelectronic enhancements. Thus, this work extends these results into AT additive concentration dependence studies in a SnPb-perovskite. Intensity-dependent PL measurements reveal hot carrier generation that is enhanced with increased concentration of ATs. An exponential-like correlation is discovered between the degree of hot carrier enhancement and AT concentration. Investigation into the additives' effects on (1) thin film morphology, especially the induced formation of 2D/quasi-2D domains, and (2) phononic properties reveals possible physical influences behind the phenomenological hot carrier and AT additive connection.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798380167666Subjects--Topical Terms:

596380
Electrical engineering.
Subjects--Index Terms:

Hot carriersIndex Terms--Genre/Form:

554714
Electronic books.

Optimization of Optoelectronic Properties and Morphologies of Organic and Hybrid Perovskite Crystalline Thin Films.
LDR:03409ntm a22004097 4500 001 1149791
005 20241022110512.5
006 m o d
007 cr bn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798380167666
035 $a (MiAaPQ)AAI30631109
035 $a AAI30631109
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Zhelyaskova, Vesta V. $3 1476132
245 1 0 $a Optimization of Optoelectronic Properties and Morphologies of Organic and Hybrid Perovskite Crystalline Thin Films.
264 0 $c 2023
300 $a 1 online resource (145 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-03, Section: B.
500 $a Advisor: Shaheen, Sean.
502 $a Thesis (Ph.D.)--University of Colorado at Boulder, 2023.
504 $a Includes bibliographical references
520 $a Organic electronic materials (OEMs) and hybrid halide perovskites (HHPs) are two classes of materials that show overwhelming potential towards a more sustainable and innovative future. In this work, we optimize crystalline thin film growth of organic small molecules p-terphenyl and C60 using a polymer-assisted crystallization solution growth method. The resulting enhanced crystalline ordering, mm-long crystallites, and low crystal formation energy are exciting steps toward potential integration of these crystalline thin films into electronic devices. HHPs are the leading emerging photovoltaic materials that could be combined with or ultimately replace silicon. Like OEMs, the performance of HHPs depends on the quality (morphology and defect density) of the material, which can be improved by tuning processing conditions or through the incorporation of additives. This work explores the latter, where a novel photoluminescence (PL) statistical analysis method is used to evaluate the effects of four different additives incorporated using three different methods in a Sn-based perovskite. The additive matrix introduced in this work can serve as a guide to additive and incorporation method choice for Sn-based perovskite material improvements. Incorporating amine-thiocyanate (AT) additives into the bulk showed the strongest optoelectronic enhancements. Thus, this work extends these results into AT additive concentration dependence studies in a SnPb-perovskite. Intensity-dependent PL measurements reveal hot carrier generation that is enhanced with increased concentration of ATs. An exponential-like correlation is discovered between the degree of hot carrier enhancement and AT concentration. Investigation into the additives' effects on (1) thin film morphology, especially the induced formation of 2D/quasi-2D domains, and (2) phononic properties reveals possible physical influences behind the phenomenological hot carrier and AT additive connection.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Electrical engineering. $3 596380
650 4 $a Materials science. $3 557839
650 4 $a Alternative energy. $3 1241221
650 4 $a Engineering. $3 561152
653 $a Hot carriers
653 $a Hybrid perovskites
653 $a Organic electronics
653 $a Photoluminescence
653 $a Thin films
655 7 $a Electronic books. $2 local $3 554714
690 $a 0794
690 $a 0537
690 $a 0363
690 $a 0544
710 2 $a University of Colorado at Boulder. $b Electrical Engineering. $3 1148661
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Dissertations Abstracts International $g 85-03B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30631109 $z click for full text (PQDT)