國立虎尾科技大學 |

Toward Injection Lasing in Halide Perovskite Semiconductors.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Toward Injection Lasing in Halide Perovskite Semiconductors./
作者:	Gunnarsson, William Brady.
面頁冊數:	1 online resource (188 pages)
附註:	Source: Dissertations Abstracts International, Volume: 85-10, Section: B.
Contained By:	Dissertations Abstracts International85-10B.
標題:	Computer engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798382193410

Toward Injection Lasing in Halide Perovskite Semiconductors.
Gunnarsson, William Brady.

Toward Injection Lasing in Halide Perovskite Semiconductors. - 1 online resource (188 pages)

Source: Dissertations Abstracts International, Volume: 85-10, Section: B.

Thesis (Ph.D.)--Princeton University, 2024.

Includes bibliographical references

Semiconductor laser diodes are vital to a wide array of technologies, including fiber optic networks, medical diagnostic tools, and remote sensing systems. Commercial laser diodes are based on epitaxially grown III-V semiconductors, which require lattice-matched substrates and high growth temperatures. In the past three decades, successful demonstrations of light-emitting diodes (LEDs) and optically pumped lasers based on non-epitaxially processed semiconductors, including organics, colloidal quantum dots (CQDs), and halide perovskites, has prompted interest in creating a laser diode from these materials, yet even today, this remains an insurmountable challenge.As compared to organics and CQDs, perovskites have the unique advantage of long-range crystal structure and delocalized carrier wavefunctions, enabling greater mobilities and alleviating non-radiative loss pathways that plague organics and CQDs. However, perovskites suffer from rapid degradation induced by thermal, electrical, and chemical stresses, rendering high-current density operation difficult. Like early GaAs laser diodes, the first non-epitaxial injection lasers will likely require cryogenic temperatures to achieve lasing, as colder temperatures substantially reduce gain thresholds and thermal stresses. This brings about a new obstacle, as perovskite LEDs feature organic charge transport layers whose conductivities decrease exponentially with decreasing temperature.We aim to augment the traditional perovskite LED architecture by replacing organic charge transport layers with inorganic materials, particularly metal oxide semiconductors. To this end, we investigate the potential for metal oxide deposition on perovskite, starting with an examination of the chemical, electronic, and structural degradation of perovskite during atomic layer deposition (ALD). We then fabricate perovskite LEDs with various metal oxide transport layers, and develop a novel method of fine-tuning charge injection balance, using a few atomic layers of Al2O3 to facilitate tunneling-mediated electron injection into the perovskite. We show that this device structure offers a substantial improvement in low-voltage operation at cryogenic temperature as compared to a traditional structure. Finally, we probe the causes of efficiency roll-off, which poses a significant challenge to injection lasing, in our LED structure. This research contributes new knowledge of perovskite device processing and behavior, which may bring the development of a perovskite laser diode closer to reality.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798382193410Subjects--Topical Terms:

569006
Computer engineering.
Subjects--Index Terms:

Halide perovskiteIndex Terms--Genre/Form:

554714
Electronic books.

Toward Injection Lasing in Halide Perovskite Semiconductors.
LDR:03950ntm a22004097 4500 001 1151201
005 20241104055825.5
006 m o d
007 cr bn ---uuuuu
008 250605s2024 xx obm 000 0 eng d
020 $a 9798382193410
035 $a (MiAaPQ)AAI30993768
035 $a AAI30993768
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Gunnarsson, William Brady. $3 1477921
245 1 0 $a Toward Injection Lasing in Halide Perovskite Semiconductors.
264 0 $c 2024
300 $a 1 online resource (188 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-10, Section: B.
500 $a Advisor: Rand, Barry P.
502 $a Thesis (Ph.D.)--Princeton University, 2024.
504 $a Includes bibliographical references
520 $a Semiconductor laser diodes are vital to a wide array of technologies, including fiber optic networks, medical diagnostic tools, and remote sensing systems. Commercial laser diodes are based on epitaxially grown III-V semiconductors, which require lattice-matched substrates and high growth temperatures. In the past three decades, successful demonstrations of light-emitting diodes (LEDs) and optically pumped lasers based on non-epitaxially processed semiconductors, including organics, colloidal quantum dots (CQDs), and halide perovskites, has prompted interest in creating a laser diode from these materials, yet even today, this remains an insurmountable challenge.As compared to organics and CQDs, perovskites have the unique advantage of long-range crystal structure and delocalized carrier wavefunctions, enabling greater mobilities and alleviating non-radiative loss pathways that plague organics and CQDs. However, perovskites suffer from rapid degradation induced by thermal, electrical, and chemical stresses, rendering high-current density operation difficult. Like early GaAs laser diodes, the first non-epitaxial injection lasers will likely require cryogenic temperatures to achieve lasing, as colder temperatures substantially reduce gain thresholds and thermal stresses. This brings about a new obstacle, as perovskite LEDs feature organic charge transport layers whose conductivities decrease exponentially with decreasing temperature.We aim to augment the traditional perovskite LED architecture by replacing organic charge transport layers with inorganic materials, particularly metal oxide semiconductors. To this end, we investigate the potential for metal oxide deposition on perovskite, starting with an examination of the chemical, electronic, and structural degradation of perovskite during atomic layer deposition (ALD). We then fabricate perovskite LEDs with various metal oxide transport layers, and develop a novel method of fine-tuning charge injection balance, using a few atomic layers of Al2O3 to facilitate tunneling-mediated electron injection into the perovskite. We show that this device structure offers a substantial improvement in low-voltage operation at cryogenic temperature as compared to a traditional structure. Finally, we probe the causes of efficiency roll-off, which poses a significant challenge to injection lasing, in our LED structure. This research contributes new knowledge of perovskite device processing and behavior, which may bring the development of a perovskite laser diode closer to reality.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Computer engineering. $3 569006
650 4 $a Materials science. $3 557839
650 4 $a Electrical engineering. $3 596380
650 4 $a Applied physics. $3 1181953
653 $a Halide perovskite
653 $a Injection lasers
653 $a Light-emitting diode
653 $a Colloidal quantum dots
653 $a Atomic layer deposition
655 7 $a Electronic books. $2 local $3 554714
690 $a 0215
690 $a 0794
690 $a 0544
690 $a 0464
710 2 $a Princeton University. $b Electrical and Computer Engineering. $3 1413580
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Dissertations Abstracts International $g 85-10B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30993768 $z click for full text (PQDT)