國立虎尾科技大學 |

Weight Reduction in Electric Motors : = Aluminum vs Copper Wires.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Weight Reduction in Electric Motors :/
其他題名:	Aluminum vs Copper Wires.
作者:	Chauvin, Lucas.
面頁冊數:	1 online resource (238 pages)
附註:	Source: Masters Abstracts International, Volume: 82-04.
Contained By:	Masters Abstracts International82-04.
標題:	Materials science. -
電子資源:	click for full text (PQDT)
ISBN:	9798678182159

Weight Reduction in Electric Motors : = Aluminum vs Copper Wires.
Chauvin, Lucas.

Weight Reduction in Electric Motors :Aluminum vs Copper Wires. - 1 online resource (238 pages)

Source: Masters Abstracts International, Volume: 82-04.

Thesis (M.A.Sc.)--University of Windsor (Canada), 2020.

Includes bibliographical references

Environmental concerns driven by climate change have resulted in increased market demand for lightweight and inexpensive electric vehicles. This study examines the feasibility of replacing copper conductors with aluminum conductors in automotive scale electric motors to address this demand. A comprehensive review of the literature contrasting aluminum and copper conductors is included to create a unified source for future research. This study also contains a two-part formability and windability analysis of square cross section electrical conductor aluminum and rectangular electrolytic tough pitch copper. The first part of the analysis applies standardized testing from ASTM D1676 to characterize the formability and windability of both conductors. Aluminum saw formability and windability advantages over copper, especially regarding springback, accommodation of elongation during high speed winding, and repeated absorption of bends and twists during winding; however, insulation adhesion and delamination issues occurred for elongation beyond 10% due to incompatibility of properties between the polymer coating and aluminum wire. The second part of the analysis compares forming behaviour of aluminum to known results for copper using a novel wire bending simulator machine. The effects of normal load, wire travel speed, and forming angle on coefficient of friction (COF) are analyzed to determine the feasibility of using aluminum for hairpin windings. The analysis finds that COF increases with both wire travel speed and forming angle. COF versus normal load shows a spike in COF followed by a sharp decrease indicative of a deformation mechanism that copper did not experience. Macroscopic analysis reveals aluminum to be more susceptible to damage from the forming equipment when compared to copper. Microscopic analysis reveals shingles and a suspected near-surface deformed layer at the aluminum/insulation interface. Detachment of these imperfections was found to occur at peak COF loads and higher from crack propagation and insulation flow into said cracks. Overall, this study shows aluminum is a viable conductor that provides significant cost and weight savings in electric machines with similar performance to copper; however, further improvement to aluminum surface quality and insulation properties is required to effectively replace copper.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798678182159Subjects--Topical Terms:

557839
Materials science.
Subjects--Index Terms:

Aluminum wireIndex Terms--Genre/Form:

554714
Electronic books.

Weight Reduction in Electric Motors : = Aluminum vs Copper Wires.
LDR:03741ntm a22004097 4500 001 1151964
005 20241125080154.5
006 m o d
007 cr mn ---uuuuu
008 250605s2020 xx obm 000 0 eng d
020 $a 9798678182159
035 $a (MiAaPQ)AAI28149167
035 $a AAI28149167
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Chauvin, Lucas. $3 1478815
245 1 0 $a Weight Reduction in Electric Motors : $b Aluminum vs Copper Wires.
264 0 $c 2020
300 $a 1 online resource (238 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 82-04.
500 $a Advisor: Edrisy, Afsaneh;Riahi, A. R.
502 $a Thesis (M.A.Sc.)--University of Windsor (Canada), 2020.
504 $a Includes bibliographical references
520 $a Environmental concerns driven by climate change have resulted in increased market demand for lightweight and inexpensive electric vehicles. This study examines the feasibility of replacing copper conductors with aluminum conductors in automotive scale electric motors to address this demand. A comprehensive review of the literature contrasting aluminum and copper conductors is included to create a unified source for future research. This study also contains a two-part formability and windability analysis of square cross section electrical conductor aluminum and rectangular electrolytic tough pitch copper. The first part of the analysis applies standardized testing from ASTM D1676 to characterize the formability and windability of both conductors. Aluminum saw formability and windability advantages over copper, especially regarding springback, accommodation of elongation during high speed winding, and repeated absorption of bends and twists during winding; however, insulation adhesion and delamination issues occurred for elongation beyond 10% due to incompatibility of properties between the polymer coating and aluminum wire. The second part of the analysis compares forming behaviour of aluminum to known results for copper using a novel wire bending simulator machine. The effects of normal load, wire travel speed, and forming angle on coefficient of friction (COF) are analyzed to determine the feasibility of using aluminum for hairpin windings. The analysis finds that COF increases with both wire travel speed and forming angle. COF versus normal load shows a spike in COF followed by a sharp decrease indicative of a deformation mechanism that copper did not experience. Macroscopic analysis reveals aluminum to be more susceptible to damage from the forming equipment when compared to copper. Microscopic analysis reveals shingles and a suspected near-surface deformed layer at the aluminum/insulation interface. Detachment of these imperfections was found to occur at peak COF loads and higher from crack propagation and insulation flow into said cracks. Overall, this study shows aluminum is a viable conductor that provides significant cost and weight savings in electric machines with similar performance to copper; however, further improvement to aluminum surface quality and insulation properties is required to effectively replace copper.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Materials science. $3 557839
650 4 $a Electrical engineering. $3 596380
650 4 $a Mechanical engineering. $3 557493
653 $a Aluminum wire
653 $a Copper wire
653 $a Electric motor
653 $a Formability
653 $a Hairpin winding
653 $a Windability
655 7 $a Electronic books. $2 local $3 554714
690 $a 0794
690 $a 0548
690 $a 0544
710 2 $a University of Windsor (Canada). $b ENGINEERING MATERIALS. $3 845537
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Masters Abstracts International $g 82-04.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28149167 $z click for full text (PQDT)